• Title/Summary/Keyword: Elevation Angle Accuracy

Search Result 48, Processing Time 0.02 seconds

An Analysis on the Degradation of Elevation Angle Accuracy Due to the Multi-Path Effect Using a Phased Array Antenna and the Beam Pattern Optimization to Minimize Its Degradation (위상배열 안테나를 활용한 다중 경로 효과에 의한 고각 정확도 열화 분석 및 열화 최소화를 위한 빔 패턴 최적화)

  • Kim, Young-Wan;Lee, JaeMin;Chae, Heeduck;Jin, Hyung-suk;Park, Jongkuk
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.12
    • /
    • pp.1036-1043
    • /
    • 2016
  • In this paper, an analysis about the elevation angle accuracy degradation of an APAR(Airport Precision Approach Radar) due to the multi-path effect using a phased array antenna was performed. An APAR installed around a runway of airport will be continuously affected in a runway surface of the fixed environment. In this paper, an analysis about the elevation angle accuracy degradation of APAR due to the multi-path effect of runway surface was conducted through a calculation of monopluse slope and sum/difference beam pattern analysis of array antenna. Also, a difference pattern for monopulse to minimize this degradation was optimized in an appropriate configuration to improve a elevation angle accuracy. Finally, a degree of improvement of elevation angle accuracy was confirmed by calculating a monopulse slope including the ground reflection after applying optimized difference patterns of array antenna.

An Analysis of GPS Station Positioning Accuracy Variations According to Locations of Obstacles (장애물 위치에 따른 GPS 기준국 측위정확도 변화분석)

  • Sohn, Dong-Hyo;Park, Kwan-Dong;Jung, Wan-Suk;Kee, Changdon
    • Journal of Navigation and Port Research
    • /
    • v.37 no.5
    • /
    • pp.463-469
    • /
    • 2013
  • This paper focuses on GPS positioning accuracy variations according to locations of obstacles which surround GPS station. We derived precise coordinates of a GPS station which has a good visibility. Its observation data was rewritten by assuming signal blocking due to obstacle in the elevation angle of $10^{\circ}$ to $70^{\circ}$. We processed daily and hourly data for 10 days. In the results using daily data, RMSE was at 10mm level. And RMSE increased to 100mm levels in case of hourly data. As the elevation angle of obstacle increased, the horizontal and vertical RMSE increased, while the height estimates decreased. These results showed the higher the elevation angle of the obstacle increased the loss of large amounts of data by blocking satellite signals direction. In terms of the direction, when the blocking thing was located in the east or west, the coordinate has larger error in the east-west direction. And if signal was blocked at the south direction, the difference between the east-west error and the south-north position error was reduced.

Accuracy of the NNSS Fix in Pusan Areas (부산지역에서의 NNSS 위치의 정도)

  • Kim, Min-Seok;Sin, Hyeong-Il
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.23 no.1
    • /
    • pp.18-24
    • /
    • 1987
  • For the purpose of getting the accuracy of NNSS fix, the continuous observation was performed to search the factors affecting the accuracy of NNSS fix, and then to examine their effects. The observation was made at Lat. $35^{\circ}'||'&'||'<\TEX>05'04"N, Long. '||'&'||'129^{\circ}'||'&'||'<\TEX> 02'13"E from 28th January to 20th July in 1985. Accuracy of the position fixed in accordance with the observation time, each satellite, elevation angle doppler count, passed direction of each satellite and the antenna height were analyzed. The results obtaines are summerized as follows: 1. The deflaetion error is reduced to 0.21 miles when the geodetic system of the calculating the position converted from WGS-72 to Bessel. 2. When the elevation angle of the mountain is high, or the range of the elevation angle of satellite is 20-70 degrees, the position fixed comes nearest the true position. 3. The position fixed is more accurate on the condition that doppler count is more than 21, and at night than in daytime. 4. The accuracy of the position fixed is more seriously affected when the input data of the antenna height has considerable errors. But there occures almost little difference in the accuracy of position according to each satellite.

  • PDF

Precision Analysis of NNSS Fix for the Assumed Error of Ship`s Speed and Course (NNSS의 침로 및 속력 추정오차에 대한 측위정도분석)

  • 김민석
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.25 no.1
    • /
    • pp.1-5
    • /
    • 1989
  • A number of studies for the improvement of the accuracy of NNSS fix were carried out previously. But most studies were done when a ship was stationary at the fixed position. To investigate the accuracy of NNSS fix affected by the error of ship's speed and course when a ship was moving, the computer simulation was performed by each satellite, passing direction of satellite, and elevation angle. The obtained results are summarized as follows: 1. When elevation angle and passing direction of satellite were constant, there were little difference in the accuracy of NNSS fix from among those. 2. The accuracy of NNSS fox caused by the error of ship's speed was in proportion to the absolute value of it without regard to the magnitude of ship's speed, and it also became different according to the ship's course. 3. When the error of ship's speed was constant, the accuracy of the fixed position became different according to the passing direction of the satellite. 4. When the ship's course was south or north, the error of NNSS fix was greater than that of east or west, and the higher the elevation angle of the satellite, the greater the error of the NNSS fix.

  • PDF

Design of Linear Interferometer Antenna Regarding Beamwidth (빔폭을 고려한 선형간섭계 안테나 설계)

  • Choi, Ik-Hwan
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.8
    • /
    • pp.693-700
    • /
    • 2016
  • In this paper, it is represented that equations for design of linear interferometer antenna when the 3 dB beamwidth is only region of interest. Using the equations, relationships between angle measurement ambiguity and element antenna spacings are described. And then, operating frequency, angle measurement accuracy, beamwidth, correct measurement probability are calculated for five antennas interferometer to measure azimuth and elevation angle. The interferometer antenna was designed and fabricated using the calculated parameters. The angle measurement accuracy were $0.01^{\circ}$ and $0.016^{\circ}$ for azimuth and elevation axes with 99 % probability of doing measurements correctly which means that ambiguous solution did not occur more than 1 % of the time. These results validated the equations and design procedures.

Evaluation of Point Positioning Using the Global Positioning System and the Quasi-Zenith Satellite System as Measured from South Korea

  • Choi, Byung-Kyu;Cho, Chang-Hyun;Cho, Jung Ho
    • Journal of Astronomy and Space Sciences
    • /
    • v.32 no.4
    • /
    • pp.403-409
    • /
    • 2015
  • The Quasi-Zenith Satellite System (QZSS), a dedicated regional Japanese satellite system currently under development, was designed to complement the performance of the Global Positioning System (GPS). The high elevation angle of the QZSS satellite is expected to enhance the effectiveness of GPS in urban environments. Thus, the work described in this paper, aimed to investigate the effect of QZSS on GPS performance, by processing the GPS and QZSS measurements recorded at the Bohyunsan reference station in South Korea. We used these data, to evaluate the satellite visibility, carrier-to-noise density (C/No), performance of single point positioning, and Dilution of Precision (DOP). The QZSS satellite is currently available over South Korea for 19 hours at an elevation angle of more than 10 degrees. The results showed that the impact of the QZSS on users' vertical positioning is greatest when the satellite is above 80 degrees of elevation. As for Precise Point Positioning (PPP) performance, the combined GPS/QZSS kinematic PPP was found to improve the positioning accuracy compared to the GPS only kinematic PPP.

Design and Fabrication of 2-Dimensional Direction Finding Receiver Using Phase Comparison (2차원 위상비교 방향탐지를 위한 수신기 설계 및 제작)

  • Jeon, Jonghwa;Jo, Sungjin;Chae, Myoungho
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.23 no.1
    • /
    • pp.52-58
    • /
    • 2020
  • In this paper, a 2-dimensional phase comparison direction finding receiver was designed and fabricated. For 2-D comparison direction finding, direction finding formulas were derived from a uniformly arranged of four antennas. Based on this, a direction finding receiver was designed using Matlab simulink, and the direction finding receiver was fabricated. To analyze the performance of the designed direction finding receiver, the injection direction finding accuracy and simulation results were compared. As a result of the test, the fabricated direction finding receiver showed a maximum of 3° RMS precision, and the result of both tests showed similar trends. Also, it was confirmed that the direction finding accuracy of elevation angle is about 2.7 times better than azimuth angle, and both models performed well within 0.7° RMS at the boresight.

Analysis on Vehicle Tracking Error due to Radio Refraction (전파굴절에 의한 비행체 추적오차 분석)

  • Oh, Chang-Yul;Lee, Hyo-Keun;Oh, Seung-Hyeub
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.11A
    • /
    • pp.1078-1084
    • /
    • 2010
  • The tracking performance of a big parabola tracking antenna system for tracking and receiving of the signal from the vehicle is impacted by many factors of the internal and the external of the system. In this paper, we analyze the tracking error due to the radio refraction in the application of the tracking and positioning of the vehicle by using radio frequency. The real measurement data are used for the analysis which had been acquired by using GPS and the tracking systems of C- and S-band frequencies in NARO Space centre. To verify the correlation between the tracking errors measured and the radio refraction, we review the error factors and the accuracies of the tracking systems, and the characteristics of the refractivity. The analysis shows that there are angular errors which are due to the radio refraction and not to be neglected, compared to the accuracies of the tracking systems, in case of low elevation angle less than 10 degrees. Also, the tracking errors depend on the target altitude as well as the elevation angle for the case of the target in the troposphere. It is recommended to correct the tracking angle considering the target altitude and elevation angle for the precise target positioning.

Accuracy Analysis of 2-D Direction Finding Based on Phase Comparison (위상비교 방식을 이용한 2차원 방향탐지 정확도 분석)

  • Chae, Myoung-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.8
    • /
    • pp.653-660
    • /
    • 2017
  • In this paper, the author analyzes direction finding accuracy based on phase comparisons to estimate elevation and azimuth angles of arrival signals. This paper considers the uniform array configurations using four and three elements. In that direction finding structures, I present the analytic expressions for estimated elevation and azimuth angles and then analyze the direction finding errors. And one presents the design guideline of direction finding system in comparison with aspects of accuracy, structure, the number of channels in that structures. The analysis result is similar with simulation one and has difference within $1.2^{\circ}RMS$. From the proposed analysis results, one knows that when SNR is 20 dB and the baseline is half of wavelength, the estimated elevation accuracy of the uniform array using four elements is 1.15 times better than the one of the uniform array using three elements and the estimated azimuth accuracy is same each other. In addition, one knows coning error is eliminated in 2-D direction finding structure.

The Relative Height Error Analysis of Digital Elevation Model on South Korea to Determine the TargetVertical Accuracy of CAS500-4 (농림위성의 목표 수직기하 정확도 결정을 위한 남한 지역 수치표고모델 상대 오차 분석)

  • Baek, Won-Kyung;Yu, Jin-Woo;Yoon, Young-Woong;Jung, Hyung-Sup;Lim, Joongbin
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.5_1
    • /
    • pp.1043-1059
    • /
    • 2021
  • Forest and agricultural land are very important factors in the environmental ecosystem and securing food resources. Forest and agricultural land should be monitored regularly. CAS500-4 data are expected to be effectively used as a supplement of monitoring forest and agricultural land. Prior to the launch of the CAS500-4, the relative canopy height error analysis of the digital elevation model on South Korea was performed to determine the vertical target accuracy. Especially, by considering area of interest of the CAS500-4 (mountainous or agricultural area), it is conducted that vertical error analysis according to the slope and canopy. For Gongju, Jeju, and Samcheok, the average root mean squared differences were calculated compared to the drone LiDAR digitalsurface models, which were filmed in autumn and winter and the 5 m digital elevation model from the National Geographic Information Institute. As a result, the Shuttle radar topography mission digital elevation model showed a root mean squared differences of about 8.35, 8.19, and 7.49 m, respectively, while the Copernicus digital elevation model showed a root mean squared differences of about 5.65, 6.73, and 7.39 m, respectively. In addition, the root mean squared difference of shuttle radar topography mission digital elevation model and the Copernicus digital elevation model according to the slope angle were estimated on South Korea compared to the 5 m digital elevation model from the National Geographic Information Institute. At the slope angle of between 0° to 5°, root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model showed 3.62 and 2.52 m, respectively. On the other hands root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model respectively showed about 10.16 and 11.62 m at the slope angle of 35° or higher.