• 제목/요약/키워드: Elemental concentration

검색결과 294건 처리시간 0.024초

황화광물정광으로부터 Bi, As 제거를 위한 마이크로웨이브 용출 특성 (Characteristics of Microwave Leaching for the Removal of Bi, As from the Sulfide Mineral Concentrate)

  • 온현성;톡토흐마;박천영
    • 한국광물학회지
    • /
    • 제31권3호
    • /
    • pp.137-147
    • /
    • 2018
  • 본 연구 목적은 페널티원소가 포함된 정광을 질산용액으로 마이크로웨이브 용출하여 Bi와 As를 효과적으로 용출하고자 하였다. 정광시료에 대한 페널티원소와 유용금속들의 용출특성을 마이크로웨이브 용출시간, 질산농도 및 정광 첨가량에 대하여 조사하였다. 그 결과 페널티원소인 Bi와 As의 용출률은 마이크로웨이브 용출시간이 증가할수록, 질산농도가 증가할수록 그리고 정광 첨가량이 감소할수록 증가하였다. 정광과 광석광물을 마이크로웨이브 가열하자, Bi가 90% 이상 제거되었고, 황비철석은 자류철석-적철석으로 상변환 되었다. 고체-잔류물에 대하여 XRD분석한 결과, 단체 황과 anglesite가 나타났다. 단체 황과 anglesite의 XRD peak는 1분에서보다 12분에서, 0.5 M보다 4 M에서 그리고 5 g보다 30 g에서 intensity가 더 증가하였고 예리해졌다. 이와 같은 결과는 용출효율이 증가할수록 더 많은 단체 황과 anglesite가 생성되기 때문인 것으로 사료된다. 정광을 마이크로웨이브 가열하면 Bi와 As가 대기 중으로 손실되지만, 질산용액으로 마이크로웨이브 용출하면 Bi와 같은 유용금속이 용출되어 회수될 수 있음을 확인하였다.

버스 정비 작업자에 대한 석면 및 디젤 엔진 배출물질 노출 평가 (Exposure Assessment to Asbestos and Diesel Engine Exhaust Particulate Matter in Urban Bus Garage)

  • 이나루;이광용
    • 한국산업보건학회지
    • /
    • 제26권2호
    • /
    • pp.219-224
    • /
    • 2016
  • Objectives: Lung cancer occurred with worker working in an urban bus garage. A survey was conducted to investigate whether lung cancer had causal relationship with work. Exposure to asbestos and diesel engine exhaust were suspected. Methods: Airborne asbestos was sampled on membrane filter and analyzed using phase-contrast microscopy. Airborne diesel exhaust was sampled using quartz filter and analyzed with thermal-optical analyzer. Polynuclear aromatic hydrocarbons was sampled using PTFE filter and XAD-2 tube and analyzed with gas chromatography-mass selective detector. Results: Airborne asbestos concentration was under 0.01 fiber/cc. Worker who warmed up an engine of urban bus for 2 hours was exposed to elemental carbon concentration, $15.5{\mu}g/m^3$. Only naphtalene among polynuclear aromatic hydrocarbons was detected. Conclusions: It was difficult to conclude about worker exposure to asbestos because working hour related asbestos was too short. In reviewing papers, the exposure to asbestos over 0.01 fiber/cc during exchange brake lining was found. It was identified that worker's occupational exposure to diesel exhaust based on elemental carbon was higher than the other occupational exposure to diesel exhaust.

Changes in Concentration Levels of Polycyclic Aromatic Compounds Associated with Airborne Particulate Matter in Downtown Tokyo after Introducing Government Diesel Vehicle Controls

  • Kojima, Yuki;Inazu, Koji;Hisamatsu, Yoshiharu;Okochi, Hiroshi;Baba, Toshihide;Nagoya, Toshio
    • Asian Journal of Atmospheric Environment
    • /
    • 제4권1호
    • /
    • pp.1-8
    • /
    • 2010
  • The effectiveness of the government regulation on tail-pipe emission for diesel vehicles issued in 2003 in Tokyo was evaluated in this study. Variations in annual average concentrations of polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs associated with airborne particulate matter were investigated in connection with the variation in airborne elemental carbon (EC) concentration in downtown Tokyo, Japan in 2006-2007 and in 1997-1998. The annual average concentrations of EC, seven different PAHs, and 1-nitropyrene were found to have decreased significantly from 1997-1998 to 2006-2007. The most prominent decrease in atmospheric concentration was observed for 1-nitropyrene, which is a representative nitro-PAH originating from diesel vehicles. This indicated that the government control has worked to considerably reduce both atmospheric mutagens and airborne particulate matter. In contrast, the concentrations of two nitro-PAHs, 2-nitrofluoranthene and 2-nitropyrene, remained the same. These nitro-PAHs are known to be formed by atmospheric nitration of their parent PAHs, and this result suggested factors other than the concentration of parent PAHs and $NO_2$ affects the degree of atmospheric formation of nitro-PAHs.

Fe-EDTA 착물을 이용한 황화수소 제거의 최적 반응 조건 (Optimum Conditions for Removal of Hydrogen Sulfide Using Fe-EDTA Complex)

  • 진상기;차진명;이인화;윤석진;김시욱
    • 공업화학
    • /
    • 제7권1호
    • /
    • pp.177-185
    • /
    • 1996
  • Fe-EDTA 착물을 이용한 황화수소 제거의 최적 반응 조건을 기포탑 반응기에서 조사하였다. 착물의 농도가 증가할수록 황화수소 산화 반응에서 전환량은 증가하였고 pH 변화와 Fe 농도는 완만하게 감소하였으며, elemental sulfur의 생성량은 증가하였다. 또한 황화수소는 0.05M 이상의 착물 농도에서 효율적으로 제거되었다. pH에 따른 황화수소 산화반응에서 pH는 착물의 안정도에 중요한 인자이고 반응 중 최적 pH 범위는 8.5~9.5 이었다. [EDTA]/[Fe] 비가 증가할수록 황화수소 산화 반응의 전환량은 증가하였고 반응 중 EDTA 농도가 감소하면 FeS로 침전이 촉진되어 전환량은 감소하였다. 즉 EDTA 농도가 증가될수록 Fe-EDTA 착물이 안정되어 전환량이 증가하였다.

  • PDF

Oxidative Stabilization Behaviors of Petroleum-based Isotropic Pitch Fiber Spun by Melt-blown Method

  • Kim, Chan;Lee, Su-Hyun;Kim, Young-Min;Yang, Kap-Seung
    • Carbon letters
    • /
    • 제2권3_4호
    • /
    • pp.170-175
    • /
    • 2001
  • A petroleum-based isotropic pitch fiber spun by melt-blown method was oxidized in air flow at various conditions. The oxidized pitch fiber obtained was tested for its infusibility and its elemental composition during the process of stabilization. The structural changes were traced by using solvent solubility, FT-IR spectroscopy, and elemental analysis. The samples showed a gradual increase in weight with increasing the oxidization temperature. The weight gain of sample oxidized at $320^{\circ}C$ for 10 min was about 4.5%. The concentration of the pyridine and toluene soluble fraction decreased with an increase in stabilization temperatures. The oxygen uptaken in the stabilization process converted aliphatic side chains into the carbonyl groups. As stabilization proceeded, the more ether and carboxylic acid groups were formed through the oxidations of aldehyde and primary alcohol, and then the carboxylic acid was dehydrated to be aromatic anhydride.

  • PDF

저온 플라즈마 반응에 의해 생성된 반응활성종을 이용한 원소상 수은의 제거 (Removal of Gaseous Elemental Mercury Using Reactive Species Produced by Dielectric Barrier Discharge)

  • 정주영;정종수
    • 한국환경과학회지
    • /
    • 제15권5호
    • /
    • pp.479-484
    • /
    • 2006
  • Removal of elemental mercury $(Hg^0)$ with the reactive species produced from dielectric barrier discharge (DBD) was studied. We investigated the effect of operating parameters such as the applied voltage, residence time, initial concentration and co-existence of other pollutants. The removal of $(Hg^0)$ was significantly promoted by an increase in the applied voltage of the DBD reactor system. It is important to note that at the same input power, the removal efficiency of $(Hg^0)$ was much higher than that of NO gas. These results imply that if the DBD system is used as a NOx treatment facility, it is capable of removing $(Hg^0)$ simultaneously with NOx.

이젝터-다공튜브 희석 샘플링과 ELPI를 이용한 석탄화력발전소 배출 미세먼지의 입자 크기에 따른 성분 분석 (Elemental components analysis according to the size of fine particles emitted from a coal-fired power plant using an ejector-porous tube dilution sampling and ELPI)

  • 신동호;박대훈;조윤희;김영훈;홍기정;이건희;한방우;황정호
    • 한국입자에어로졸학회지
    • /
    • 제18권3호
    • /
    • pp.69-77
    • /
    • 2022
  • In order to understand the characteristics of fine particles emitted from coal-fired power plant stacks, it is important to analyze the size distribution and components of particles. In this study, particle size distributions were measured using the ejector-porous tube dilution device and an ELPI system at a stack in a coal-fired power plant. Main elemental components of particles in each size interval were also identified through TEM-EDS analysis for the particles collected in each ELPI stage. Particle size distributions based on number and mass were analyzed with component distributions from 0.006 to 10 ㎛. The highest number concentration was about 0.01 ㎛. The main component of the particles consisted of sulfur, which indicated that sulfate aerosols were generated by gas-to-particle conversion of SO2. In a mass size distribution, a mono-modal distribution with a mode diameter of about 2 ㎛ was shown. For the components of PM1.0 (particles less than 1 ㎛), the abundance order was F > Mg > S > Ca, and however, for the components of PM10 (particles less than 10 ㎛), it was in the order of Fe > S > Ca > Mg. The elemental components by particle size were confirmed.

중성자방사화분석에 의한 인체 6개 조직 내 기능성원소 함량 분포 조사 (Investigation of Dynamic Elemental Distribution in Six Human Tissues by Neutron Activation Analysis)

  • 강상훈;문종화;정용삼;조승연;이한영
    • 분석과학
    • /
    • 제15권4호
    • /
    • pp.365-372
    • /
    • 2002
  • 본 연구에서는 한국 성인의 인체 조직인 늑골, 폐, 간, 근육, 신장 및 갑상선에 함유된 무기원소들의 함량을 조사하였다. 이 조직들은 48시간 이내의 사망자들로부터 IAEA 권고방식에 따라 채취하여 동결건조 시킨 후 분말상태로 만들었다. 중성자 방사화분석법을 이들 시료에 적용하여 5개 다량원소인 Ca, Mg, Na, K, Cl과 12개 미량원소인 Mn, I, Sr, As, Br, Co, Cr, Cs, Fe, Rb, Se, Zn의 함량을 분석하였다. 측정결과의 정확도 확인용으로 3가지 표준물질을 이용하였으며, 대부분의 원소에서 10% 이내의 상대오차를 나타냈고, 분석값의 수용기준인 Z값은 2이내였다. 다량원소들은 인체조직에 일정량 이상 고르게 분포하고 있었으며, 미량원소들은 조직별, 연령별 특정 농도를 나타내었다. 특히, 갑상선에서 I은 1000 ${\mu}g/g$ 이상 집중적으로 분포하였으며, Ca과 Sr은 늑골에서 각각 15.9%와 84.4 ${\mu}g/g$으로 나타났다.

황사시와 비황사시 대기 입자상 탄소성분의 농도 특성 (Concentration Characteristics of Elemental and Organic Carbons During Asian Dust Episode and Non-Episode)

  • 황경철;조기철;신은상
    • 환경위생공학
    • /
    • 제24권4호
    • /
    • pp.102-111
    • /
    • 2009
  • In this study, Particulate carbon were determined from 1990 to 1995. The annual variation were investigated. The sampling was carried out using high volume air sampler. Average concentrations of EC and OC during the yellow sand event were $25.70{\mu}g/m^3$ and $13.91{\mu}g/m^3$, respectively, $22.10{\mu}g/m^3$ and $10.33{\mu}g/m^3$ during the non-yellow sand event. TC concentration of TSP were 10.7% during the yellow sand event and 20.6% during the non-yellow sand event. Average concentration rate of EC and OC of TC were 64.9% and 35.1%, respectively during the yellow sand event, 67.6% and 32.4% during the non-yellow sand event.

대구 안심연료단지 환경오염물질 노출 평가(III) - 원소 탄소, 결정형 실리카 및 안정동위원소비를 이용한 오염원 기여율 및 분포특성 - (Exposure Assessments of Environmental Contaminants in Ansim Briquette Fuel Complex, Daegu(III) - Contribution and distribution characteristics of air pollutants according to elemental carbon, crystalline silica, and stable isotope ratio -)

  • 정종현;피영규;손병현;배혜정;양원호;김지영;김근배;최종우;박성준;이관;임현술
    • 한국산업보건학회지
    • /
    • 제25권3호
    • /
    • pp.392-404
    • /
    • 2015
  • Objectives: This study measured and analyzed the concentrations of crystalline silica, elemental carbon and the contribution ratio of pollutants which influence environmental and respiratory disease around the Ansim Briquette Fuel Complex in Daegu, Korea. Methods: We analyzed the crystalline silica and elemental carbon in the air according to FTIR(Fourier Transform Infrared Spectroscopy) and NIOSH(National Institute of Occupation Safety and Health) method 5040, respectively. In addition, lead stable isotopes, and carbon and nitrogen stable isotopes were analyzed using MC-ICP/MS(Multi Collector-Inductively Coupled Plasma/Mass Spectrometer), and IRMS(Isotope Ratio Mass Spectrometer), respectively. Results: The concentration of crystalline silica in the direct exposure area around the Ansim Briquette Fuel Complex was found to be $0.0014{\pm}0.0005mg/Sm^3$, but not to exceed the exposure standards of the ACGIH(American Conference of Governmental Industrial Hygienists). In the case of the autumn, the direct exposure area was found to show a level 2.5 times higher than the reference area, and on the whole, the direct exposure area was found to have a level 1.4 times higher than the reference area. The concentration of elemental carbon in the direct exposure area and in the reference area were found to be $0.0014{\pm}0.0006mg/Sm^3$, and $0.0006{\pm}0.0003mg/Sm^3$, respectively. This study confirmed the contribution ratio of coal raw materials to residentially deposited dusts in the area within 500 meters from the Ansim Briquette Fuel Complex and the surrounding area with a stable isotope ratio of 24.0%(0.7-62.7%) on average in the case of carbon and nitrogen, and 33.9%(26.6-54.1%) on average in the case of lead stable isotopes. Conclusions: This study was able to confirm correlations with coal raw materials used by the Ansim Briquette Fuel Complex and the surrounding area. The concentration of some pollutants, crystalline silica, and elemental carbon emitted to the direct-influence area around the Ansim Briquette Fuel Complex were relatively higher than in the reference area. Therefore, we need to impose continuous and substantive reduction countermeasures in the future to prevent particulate matter and coal raw materials in the study area. It is time for the local government and authorities to prepare active administrative methods such as the relocation of Ansim Briquette Fuel Complex.