• 제목/요약/키워드: Elemental System

검색결과 306건 처리시간 0.026초

Direct Analysis of Aerosol Particles by Atomic Emission and Mass Spectrometry

  • Kawaguchi, Hiroshi;Nomizu, Tsutomu;Tanaka, Tomokazu;Kaneco, Satoshi
    • 분석과학
    • /
    • 제8권4호
    • /
    • pp.411-418
    • /
    • 1995
  • A method for the direct determination of elemental content in each of aerosol particles by inductively coupled plasma atomic emission (ICP-AES) or mass spectrometry (ICP-MS) is described. This method is based upon the introduction of diluted aerosol into an ICP and the measurement of either the flash emission intensities of an atomic spectral line or ion intensities. A pulse-height analyzer is used for the measurement of the distribution of the elemental content. In order to calibrate the measuring system, monodisperse aerosols are used. The potentials of the method are shown by demonstrating the copper emission signals from the aerosols generated at a small electric switch, a study of the relation between the decreasing rate of particle number density and particle size, and measurements of calcium contents in the individual biological cells.

  • PDF

오디오 포렌식을 위한 소리 데이터의 요소 기술 식별 연구 (A Study on Elemental Technology Identification of Sound Data for Audio Forensics)

  • 유혜진;박아현;정성균;정두원
    • 정보보호학회논문지
    • /
    • 제34권1호
    • /
    • pp.115-127
    • /
    • 2024
  • 최근 디지털 오디오 매체의 증가로 인해 소리 데이터의 규모와 다양성이 크게 확대되었으며, 이로 인해 디지털 포렌식 과정에서 소리 데이터 분석의 중요도가 증가하였다. 하지만 소리 데이터 분석에 대한 표준화된 절차나 가이드 라인이 부족하여 분석 결과의 일관성과 신뢰성에 문제가 발생하고 있다. 디지털 환경은 다양한 오디오 형식과 녹음 조건을 포함하고 있지만, 현재 오디오 포렌식 방법론은 이러한 다양성을 충분히 반영하지 못하고있다. 이에 본 연구에서는 모든 상황에서 효과적인 분석을 수행할 수 있도록 Life-Cycle 기반 소리 데이터 요소기술을 식별하여 소리 데이터 분석의 전반적인 가이드라인을 제시하였다. 이와 더불어, 식별한 요소 기술을 소리 데이터를 대상으로 하는 디지털 포렌식 기술 개발에 활용하기 위해 분석을 진행하였다. 본 연구에서 제시한 Life-Cycle별 소리 데이터 요소 기술 식별 체계의 효과성을 입증하기 위하여 소리 데이터 기반으로 응급상황을 검색할 수 있는 기술을 개발하는 과정에 대한 사례 연구를 제시하였다. 해당 사례 연구를 통해 소리 데이터를 대상으로 하는 디지털 포렌식 기술 개발 과정에서 Life-Cycle 기반으로 식별한 요소 기술이 데이터 분석의 질과 일관성을 보장하게 하고 효율적인 소리 데이터 분석을 가능하게 함을 확인하였다.

수은 연속측정시스템에서 전이금속에 의한 산화수은의 원소수은으로의 촉매환원 (Catalytic Reduction of Oxidized Mercury to Elemental Form by Transition Metals for Hg CEMS)

  • 함성원
    • 청정기술
    • /
    • 제20권3호
    • /
    • pp.269-276
    • /
    • 2014
  • 본 연구는 수은연속측정시스템의 가장 중요한 구성 요소의 하나인 산화수은을 원소수은으로 환원시킬 수 있는 건식 환원촉매시스템 개발을 목적으로 수행되었다. 산화-환원 표준전위를 기준으로 산화수은의 원소수은으로의 환원반응을 자발적으로 일으킬 수 있는 촉매 대상물질로 Fe, Cu, Ni 및 Co 4종류의 전이금속이 선택되었다. 이들 전이금속 촉매들은 산소가 없는 반응가스 조성에서 산화수은의 원소수은으로의 환원반응에 대해 높은 활성을 보였다. 그러나 산소가 존재하는 경우 환원 활성이 크게 감소하는데 이는 산소에 의해 해당 전이금속이 산화수은 환원 활성이 낮은 전이금속산화물로 변환되기 때문이다. 반응가스에 산소가 존재하여도 수소를 공급하면 산화수은 환원 활성이 크게 증가되는데 이는 산화수은의 환원반응이 진행되는 고온에서 산소와 수소 사이의 연소반응에 의해 산소가 소모되기 때문으로 확인되었다. Fe를 환원촉매로 하고 배기가스에 수소를 공급하는 산화수은 환원촉매시스템은 $SnCl_2$ 수용액을 사용하는 습식화학 환원기술에 필적할 수준의 활성을 나타내기 때문에 상업적으로 적용 가능한 산화수은 환원시스템으로 기대된다.

실리콘 슬러지로부터 실리콘의 전해회수(電解回收) (Recovery of Silicon from Silicon Sludge by Electrolysis)

  • 박제식;장희동;이철경
    • 자원리싸이클링
    • /
    • 제21권5호
    • /
    • pp.31-37
    • /
    • 2012
  • 실리콘 웨이퍼공정에서 발생하는 실리콘 슬러지로부터 실리콘 및 탄화규소를 분리한 다음, 전해법으로 원소형태의 실리콘을 회수하는 연구를 수행하였다. 실리콘 슬러지의 주요 불순물은 절삭유, 금속불순물, 실리콘 및 실리콘 카바이드를 들 수 있다. 기계적 선별법으로 분리한 실리콘, 탄화실리콘 복합물을 $1000^{\circ}C$에 1시간동안 염화 배소하여 응축하고 회수한 사염화실리콘을 이온성액체인 $[Bmpy]Tf_2N$에 용해하여 전해액으로 사용하였다. 순환전위법으로부터 $[Bmpy]Tf_2N$의 안정한 전압구간과 사염화실리콘을 용해한 $[Bmpy]Tf_2N$ 전해액에서 실리콘의 환원으로 추정되는 환원피크를 얻을 수 있었다. 정전위법(-1.9 V vs. Pt-QRE)에서 1시간동안 금 전극 상에 전해한 다음, 전극표면을 XRD, SEM-EDS 및 XPS 분석을 통하여 실리콘이 원소형태로 전착되었음을 확인하였으며, 미량의 산소가 검출되는 것은 분석과정에서 시편이 공기 중에 노출되었기 때문으로 판단된다.

철도화재 안전관리체계 개선 및 장기전략 수립 방안에 관한 연구 (A study on the establishment of advanced safety management system and long-tenn plan for railway fire safety improvement)

  • 왕종배;김상암;곽상록
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(II)
    • /
    • pp.229-234
    • /
    • 2003
  • In this paper, the elemental components and improving purpose in advanced safety management system are reviewed to cope with a railway fire accident. And a considering procedure(V-cycle) of long-term plan for railway fire safety improvement is proposed. For the purpose of preventing recurrence of accident, items which have to be considered in the course of accident investigation and cause analysis are presented according to the stage of investigation activity.

  • PDF

Volumetric 집적영상에서 분산 추정을 이용한 심하게 은폐된 물체의 향상된 복원 (Enhanced Reconstruction of Heavy Occluded Objects Using Estimation of Variance in Volumetric Integral Imaging (VII))

  • 황용석;김은수
    • 한국광학회지
    • /
    • 제19권6호
    • /
    • pp.389-393
    • /
    • 2008
  • 본 논문에서는 컴퓨터 집적영상(integral imaging(II))에서 분산 추정을 이용하여 심하게 은폐된 물체의 복원 시 은폐물(occluding object)의 블러링 효과를 제거하는 방법을 제안하였다. 하나의 요소영상(elemental image) 군으로부터 은폐 효과를 제거하여 복원된 영상의 선명도를 향상시키는 정보를 추출하는 방법을 분석하였다. 이를 실행하기 위해 픽업되는 요소영상들이 높은 해상도, 낮은 초점오차(focus error), 큰 깊이감을 가질 필요가 있다. 요소 영상을 픽업할 때 디지털 컴퓨터를 이용한 synthetic aperture integral imaging(SAII)이 채택되었다. 컴퓨터(Computational) II에서는 복원 면의 위치에 따라 복원되는 영상의 촛첨이 맺히는 영역이 달라진다. 심하게 은폐된 물체 영상의 복원은 은폐 물체의 블러링(bluring) 효과가 복원 면에 전체적으로 크게 나타나기 때문에 선명한 복원을 할 수가 없다. 이러한 은폐물의 블러링 효과가 제거된 복원 영상을 얻기 위해 분산 추정이라는 통계적인 방법이 채택되었다.

마리아나 해구에 인접한 서태평양 심해평원의 정점 WP21GPC04에서 수집된 해양 퇴적물의 깊이에 따른 원소 및 광물 분포 변화 (Depth-dependent Variations in Elemental and Mineral Distribution in the Deep Oceanic Floor Sediments (WP21GPC04) near the Mariana Trench in the Western Pacific Ocean)

  • 허준태;윤서희;김종욱;고영탁;이용재
    • 자원환경지질
    • /
    • 제56권5호
    • /
    • pp.581-588
    • /
    • 2023
  • 본 연구에서는 2021년 WP21 탐사를 통해 수집한 마리아나 해구 주변 해양퇴적물(WP21GPC04)에 대한 깊이 별 원소 분포 및 광물 구성에 대한 분석을 수행하였다. 마이크로 X선 형광법(μ-XRF)을 통해 분석된 WP21GPC04 해양 퇴적물의 평균 화학조성은 깊이에 따른 특징적인 변화 없이 평균 SiO2 53.91 wt%, FeO 4.48 wt%, Al2O3 16.56 wt%, MgO 2.56 wt%, CaO 4.79 wt%, Na2O 3.52 wt%, K2O 5.48 wt%를 보이며, 이를 Mariana pelagic clay와 평균 해양 퇴적물의 원소 분포인 GLOSS (global subducting sediment)의 성분과 비교하였다. 방사광 X선 회절법(Synchrotron-XRD)을 이용하여 분석된 광물 구성은 깊이에 따라 다소 차이가 있음을 확인하였다. 석영, 운모, 사장석은 모든 깊이에서 확인된 반면 녹니석은 상대적으로 얕은 깊이에서만 확인되었고, 제올라이트 계열인 필립사이트와 휼란다이트는 퇴적 깊이에 따라 점진적인 함량의 변화를 보였다. 이는 해양 퇴적물의 퇴적 시기에 따른 환경에 변화가 있었거나 유사한 상 안정성에 의한 공생관계로 해석될 수 있다. 본 연구 결과는 서태평양 마리아나 해구 주변의 퇴적 환경 변화와 섭입하는 해양 퇴적물의 상 분포 및 거동에 따른 섭입대 특성 연구에 대한 기초 자료를 제공할 것이다.

자동차용 IRDS 응축기에 대한 실험과 해석적 연구 (An Experimental and Numerical Study on Automotive IRDS Condenser)

  • 김학준
    • 한국자동차공학회논문집
    • /
    • 제19권1호
    • /
    • pp.58-65
    • /
    • 2011
  • The specific objective of this study was to develop an IRDS (integrated receiver drier subcooling) condenser model for use in a mobile air-conditioning system. A three-zone model based on the desuperheating, two-phase, and subcooling sections of a condenser could be used to estimate the performance with a good accuracy. Overall heat transfer coefficients for each of the three sections, expressed as a function of the air velocity across the condenser and refrigerant mass flow rate and the model using the elemental difference method incorporate calculations to determine the pressure drop, heat performance within the condenser and it includes physical parameters (pass, tube hole size and length) that can be varied to analyze potential design changes without exhaustive experimental efforts. it was found that an accuracy of heat performance was within 5% in case of using the various condensers, the refrigerant pressure drop was predicted within 25% and the pressure drop of air side was well matched with experiment data within 4%.

Cu/In 비에 따른 $CuInS_{2}$ 박막의 특성에 관한 연구 (A Study on Properties of $CuInS_{2}$ thin films by Cu/In ratio)

  • 양현훈;김영준;정운조;박계춘
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 춘계학술대회
    • /
    • pp.326-329
    • /
    • 2007
  • $CuInS_{2}$ thin films were synthesized by sulpurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furnace annealing at temperature 200[$^{\circ}C$]. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInS_{2}$ thin films with non-stoichiometry composition. $CuInS_{2}$ thin film was well made at the heat treatment 200[$^{\circ}C$] of SLG/Cu/ln/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and Hall measurement system. At the same time, carrier concentration, hall mobility and resistivity of the thin films was $9.10568{\times}10^{17}$ [$cm^{-3}$], 312.502 [$cm^{2}/V{\cdot}s$] and $2.36{\times}10^{-2}$ [${\Omega}{\cdot}cm$], respectively.

  • PDF

PHYSICOCHEMICAL CHARACTERIZATION OF UASB GRANULAR SLUDGE WITH DIFFERENT SIZE DISTRIBUTIONS

  • 안영희;송영진;이유진;박성훈
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
    • /
    • pp.172-181
    • /
    • 2001
  • Upflow anaerobic sludge blanket (UASB) system employs granular sludge to treat various wastewaters including landfill leachate. CH$_4$ production of the granules determines overall performance of a UASB reactor. Sludge granules are developed by self-granulation of microorganisms and dynamic balance between granule growth and decay results in coexistence of granules with different sizes in the reactor. In this study, granules taken from a laboratory-scale UASB reactor were classified into 4 groups based on their diameters and their Physicochemical characteristics we were investigated. Each group was analyzed for settling ability, specific methanogenic activity (SMA), and elemental content. Settling ability was proportional to granule diameter. suggesting effective detainment of larger granules in the reactor. When acetate or glucose was used as a substrate, all groups showed relatively slight difference in SMA. However SMA with a volatile fatty acid mixture showed significant increase with granule diameter, suggesting better establishment of syntrophic relationship in larger granules. Larger granules showed higher value of SMA upon environmental changes (i.e., PH, temperature, or toxicant concentration). Comparative analysis of elemental contents showed that content (dry weight %) of most tested elements (iron, calcium, phosphorus, zinc, nickel. and manganese) deceased with granule diameter, suggesting importance of these elements for initial granulation. Taken together, this study verified experimentally that Physicochemical Properties of granules are related to granule size distributions. Overall results of physicochemical characterization supports that larger.

  • PDF