• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2069-2076
• /
• 2008

In this paper, we develop an electrostatic monitoring system which is composed of an electrostatic prediction system and a warning message transmission system. The electrostatic prediction system in a factory receives the value of electrostatic charge from the electrostatic sensor and predicts the next value by using past data and sends the value to the warning message transmission system through the bluetooth communication. The warning message transmission system gets a warning signal and transmits the warning message to the worker's cellphone through a commercial SMS web by a socket program running on Windows PC in a control room. We propose electrostatic forecasting algorithms based on LSR(least square regression) using weight factors in an electrostatic prediction system. Simulation results show that the algorithm with dynamically variable weight factors is best with 64.69V standard deviation and a warning message transmitted by the warning message transmission system is displayed on cellphone after about 5 seconds.

• Nuclear Engineering and Technology
• /
• v.37 no.4
• /
• pp.395-400
• /
• 2005

An environmental radon monitoring system, comprising a radon-cup, an etching system, and a track counting system, was constructed. The radon cup is a cylindrical chamber with a radius of 2.2 cm and a height of 3.2 cm in combination with a CR-39 detector. Carbon is impregnated in the bodies of the detector chamber to avoid problem of an electrostatic charge. The optimized etching condition for the CR-39 exposed to a radon environment turned out to be a 6 N NaOH solution at 70^{\circ}$ over a 7hour period. The bulk etch rate under the optimized condition was $1.14{\pm}0.03\;{\mu}m\;h^{-1}$. The diameter of the tracks caused by radon and its progeny were found to be in the range of $10\~25\;{\mu}m$ under the optimized condition. The track images were observed with a track counting system, which consisted of an optical microscope, a color charged couple device (CCD) camera, and an image processor. The calibration factor of this system is obtained to be $0.105{\pm}0.006$ tracks $cm^2$ per Bq $m^{-3}$ d.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.338-343
• /
• 1997

The response of seventy-five rice cultivars to ozone (O$_3$) were tested in the open-top chamber with ozone producing and monitoring system to determine the varietal difference of resistance to $O_3$ stress. Ozone was produced by electrostatic discharge in oxygen and was monitored by UV absorption ozone analyzer. Difference in response of rice to ozone was more clearly appeared on rice plants treated for 2 to 4 hours at 0.3 ppm concentration of $O_3$. Varietal resistance of rice to ozone was more distinctly classified at 21- to 35-day seedlings compared with 14-day rice plants. Most of indica and Tongil(indica$\times$japonica) type rice cultivars were more resistant than that of japonica cultivars based on the leaf injury to $O_3$. Eight Korean cultivars belong to japonica groups showed highly resistant reaction to $O_3$. Ozone exposure during booting stage caused lower grain fertility than exposures during seedling, maximum tillering and heading stages of rice.