• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1259-1268
• /
• 2023

본 연구는 딥러닝의 합성곱과 순환신경망 네트워크를 기반으로 시각센서를 이용해 속도(Throttle)와 조향(Steering) 제어 기술을 제안한다. 학습 트랙을 시계, 반시계 방향으로 주행하며 카메라 영상 이미지와 조종 값 데이터를 수집하고 효율적인 학습을 위해 데이터 샘플링, 전처리 과정을 거쳐 Throttle과 Steering을 예측하는 모델을 생성한다. 이후 학습에 사용되지 않은 다른 환경의 테스트 트랙을 통해 검증을 진행하여 최적의 모델을 찾고 이를 CNN(Convolutional Neural Network)과 비교하였다. 그 결과 제안하는 딥러닝 모델의 성능이 뛰어남을 확인했다.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.9-16
• /
• 2007

This paper describes the design and implementation of the fault diagnosis on the Electronic Throttle Control(ETC) System. The proposed fault diagnosis consists of an input signal, actuator and a processor diagnosis. The input signal diagnosis can detect the faults of the ETC system's input signals such as the position sensor fault, source voltage fault, load current fault, and desired position fault. The actuator diagnosis is able to detect the actuator fault due to the actuator aging and an obstacle which interfere in the movement of the actuator. The processor diagnosis detects the fault which prevents the microprocessor from operating the ETC software. In order to protect the breakdown of the ETC system and assure the driving safety, appropriate reactions are also proposed according to the detected faults. The safety and reliability of the ETC system can be improved by the proposed fault diagnosis.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.28-35
• /
• 2015

Thin film electronic devices which brought the current mobile environment could be fabricated only under the high quality vacuum conditions provided by high vacuum systems. Especially for the development of advanced thin film devices, constant high quality vacuum as the deposition pressure is definitely needed. For this purpose, the variable conductance throttle valves were employed to the high vacuum system. In this study, the effects of throttle valve applications on vacuum characteristics were simulated to obtain the optimum design modelling of variable conductance of high vacuum system. Commercial simulator of vacuum system, $VacSim^{(multi)}$, was used on this investigation. Reliability of employed simulator was verified by the simulation of the commercially available models of high vacuum system. Simulated vacuum characteristics of the proposed modelling were agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve were schematized as the modelling of throttle valve for the constant process-pressure of below $10^{-3}torr$. Simulation results were plotted as pump down curve of chamber, variable valve conductance and conductance logic of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.71-77
• /
• 2008

This paper proposes an Electronic Throttle Body (ETB) model considering a non-linearity of DC motor driver which is integrated with a H-bridge and a gate driver. A propagation delay and reverse recovery time of switching components cause non-linear characteristic of DC motor driver. This non-linearity affects not only the amateur voltage of DC motor, but also entire behaviour and parameters of ETB. In order to analyze the behavior of ETB more accurately, this non-linear effect of DC motor driver is modeled. The developed ETB model is validated by use of the step response and ramp response experiments, and it shows relatively accurate results compared with linear DC motor driver model.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.58-63
• /
• 2020

The fuel injection amount and timing along with the ignition timing for the gasoline engine of a racing car were adjusted using an electronic control unit (ECU), and the engine performance was evaluated through an acceleration test. The fuel map for the fuel injection amount and ignition map for the ignition timing were derived. Using the transient throttle control, the air-fuel ratio could be maintained at a constant value even in the case of a sudden throttle operation. In the flat shift, ignition blocking was more effective than fuel blocking. In a 75 m acceleration test, the required duration without and with ECU control was 4.47 s and 3.99 s, respectively. Notably, the acceleration could be improved by approximately 10.7% when the ECU control was implemented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.637-638
• /
• 2008

최근 하이브리드 전기자동차의 관심이 높아짐에 따라 전기적 신호의 연결로 구동 시스템을 구성하는 X-by-wire기술 연구가 활발하게 이루어지고, 있다. 그 중 Drive시스템을 관장하는 Throttle-by-Wire 기술의 일환으로 ETC(Electronic Throttle Control)장치에 대한 연구가 진해되고 있으며, 일부 제품이 출시되고 있다. ETC 구성요소 중 가장 핵심인 모터 설계를 위해 본 논문에서는 우수한 성능을 가지는 BLDC 모터를 선택하고, 기초 설계를 통해 그 형상을 설계하였으며, 보다 더 높은 효율과 출력 토크를 얻기 위해 회전자 영구자석의 재질과 형상을 변화시키며 효율과 출력 토크에 미치는 영향을 살펴보았다.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.113-119
• /
• 2005

The passenger car drivers want in general to feel good driveability, but they sometimes feel uncomfortable by shock and jerk phenomenon when they push or release acceleration pedal with clutch engaged. In this paper, the shock and jerk characteristics are studied on the vehicles of the throttle-by-wire system. With this system, the throttle is not directly controlled by drivers but via a microprocessor. So the control logic of the throttle is very important on tip-in and tip-out driveability. Experiments were carried out on two vehicles which show different control characteristics. The torque control logics were analyzed by measuring cylinder pressures. The results show that special torque control logic is needed at tip-in/out state for good driveability.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1166-1174
• /
• 2002

This paper presents the implementation and vehicle tests of a vehicle longitudinal control scheme for Stop and Go cruise control. The control scheme consists of a vehicle-to-vehicle distance control algorithm and throttle/brake control algorithm for acceleration tracking. The desired acceleration of a vehicle for vehicle-to-vehicle distance control has been designed using Linear Quadratic optimal control theory. Performance of the control algorithm has been investigated via vehicle tests. A millimeter wave radar sensor has been used for distance measurement. A stepper motor and an electronic vacuum booster have been used for throttle/brake actuators, respectively. It has been shown that the proposed control algorithm can provide satisfactory performance.

• 오토저널
• /
• 제9권5호
• /
• pp.66-76
• /
• 1987

The control technique for an electronic engine is studied. For this study an IBM-PC and a throttle body fuel injection system are selected. The computer controls fuel injection, spark timing, exhaust gas recirculation and idle speed. Fuel injection is adjusted either by a feed back signal of a zirconia $O_{2}$ sensor or programmed logic for starting, deceleration, warm ing up and idle modes. When a 3-way catalytic converter is used with the electronic engine control system, CO, THC, and NOx were reduced more than 90% simultaneously.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1359-1366
• /
• 2010

최근 많은 전자제어기술이 개발되고 있으며 또한 차량에 적용되고 있다. 이러한 기술들 중 throttle-by-wire, brake-by-wire, steer-by-wire 와 같은 X-by-wire 가 대표적이며 이는 기계적으로 연결된 부분이 전기적인 신호나 액추에이터로 대체된 것이다. 본 논문에서는 스쿨존에서의 차량의 속도 제어를 위하여 throttle-by-wire, brake-by-wire 가 고려되었으며 특히 스쿨 존에서는 다른 지역에 비해 사고가능성이 높다. 그 이유는 보행자가 횡단 시에 다수의 운전자들이 규정속도를 지키지 않기 때문이다. 따라서 본 논문에서는 스쿨 존에서 규정속도 내로 주행하도록 throttle-by-wire, brake-by-wire 를 이용하여 차량을 감속 제어하였으며 이를 위하여 양산차량의 엔진과 변속기의 제원을 사용하였다. 둘째, 차량의 감속에 있어서 운전자와 승객이 불쾌감을 느낄 수 있는 급격한 감속을 줄이기 위하여 제안된 3 차 궤적 추종법을 적용시켰으며 궤적 추종을 위하여 퍼지-PID 제어를 사용하였다. 마지막으로 시뮬레이션을 통하여 제안된 차량의 감속 제어 시스템의 성능을 확인하였다.