• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.274-277
• /
• 2001

This paper describes the simulation study. conducted on the propagation characteristics of AE signal. In the case of gas insulation, such as $SF_6$, the equipment is less affected by the environment condition than air insulation, because the component parts of equipment were placed in the enclosure, which is filled with compressed gas. But. when the breakdown in the electric insulation occurs. it takes much time and economical efforts to repair. Therefore it is very important to diagnose the equipment before the accident. And. in general. UHF and AE signal is the most common transducer to diagnose the state of the power equipment, so, in this investigation, we make a experimental apparatus with aluminum plate and transient analysis with ANSYS to observe the propagation characteristics of AE signal. Through the result of the analysis. we can make a further understanding on the propagation characteristics of AE signal, and get the fundamental skills for the GIS diagnosis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.274-277
• /
• 2001

This paper describes the simulation study, conducted on the propagation characteristics of AE signal. In the case of gas insulation, such as SF6, the equipment is less affected by the environment condition than air insulation, because the component parts of equipment were placed in the enclosure, which is filled with compressed gas. But, when the breakdown in the electric insulation occurs, it takes much time and economical efforts to repair. Therefore it is very important to diagnose the equipment before the accident. And, in general, UHF and AE signal is the most common transducer to diagnose the state of the power equipment, so, in this investigation, we make a experimental apparatus with aluminum plate and transient analysis with ANSYS to observe the propagation characteristics of AE signal. Through the result of the analysis, we can make a further understanding on the propagation characteristics of AE signal, and get the fundamental skills for the GIS diagnosis.

• 한국전자통신학회논문지
• /
• 제11권11호
• /
• pp.1101-1106
• /
• 2016

본 논문은 기존의 오토 트랜스미션에 볼 삽입 시 나타나는 불량문제를 해소하기 위한 볼 프레스 압입 장치를 개발에 대한 내용이다. 볼 프레스 압입장치는 가열장치, 이 가열장치를 제어하기 위한 온도조절창치, 그리고 양산성을 향상하기 위한 자동화된 볼 삽입장치 등으로 구성되어 있다. 이 장치의 개발을 통해 국내 자동차 생산 오토 트랜스미션 부품의 품질 향상 및 생산성 향상에 기여할 수 있었으며 기업의 원가 절감 및 매출증대에 기여할 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.259-262
• /
• 2013

Multi-site testing is considered as a solution to reduce test costs. This paper presents a new channel sharing architecture that enables I/O pins to share automatic test equipment (ATE) channels using simple circuitry such as tri-state buffers, AND gates, and multiple-input signature registers (MISR). The main advantage of the proposed architecture is that it is implemented on probe cards and does not require any additional circuitry on a target device under test (DUT). In addition, the proposed architecture can perform DC parametric testing of the DUT such as leakage testing, even if the different DUTs share the same ATE channels. The simulation results show that the proposed architecture is very efficient and is applicable to both wafer testing and package testing.

• 설비공학논문집
• /
• 제16권7호
• /
• pp.623-629
• /
• 2004

Rapid development of electronic technology requires small size, high density packaging and high power of electronic devices, which result in more heat generation by the electronic system. Present cooling technology may not be adequate for the thermal management in the current state-of-the-art electronic equipment. Forced convective heat transfer in a channel filled with pin-fin array is studied experimentally in this paper as an alternative cool-ing scheme for a high heat-dissipating equipment. Various configurations of the pin-fin array are selected in order to find out the effect of spacing and diameter of the pin-fin on the heat transfer and pressure drop characteristics. In the low porosity region, interfacial heat transfer and pressure drop seem to show different trend compared to the conventional heat transfer process.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권1호
• /
• pp.27-32
• /
• 2015

Functional safety is part of the overall safety relating to the equipment under control (EUC) and the EUC control system that depends on the correct functioning of the electrical/electronic/programmable electronic (E/E/PE) safety-related systems. Since the complexity of the medical equipment is increased, manufactures have to obtain functional safety as well as basic safety. This study proposes a perspective for applying functional safety to medical equipment. The research is carried out with respect to overall safety life-cycle of functional safety and essential performance of the medical equipment. The relationship between functional safety and essential performance is identified centered on the safety function. The essential performance using E/E/PE systems is defined as a safety function of functional safety. This approach is applied to a ultrasound imaging system as a case study.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.94-100
• /
• 2024

Recently, as interest in personal hygiene has increased due to the community spread of COVID-19 and variant viruses, fixed and potable UV germicidal equipment to sterilize indoor spaces and hand-held UV germicidal equipment to sterilize household items such as masks and mobile phones are continuously being developed and sold. However, the development and sales of the product are difficult because appropriate testing methods have not yet been established. In this situation, if an uncertified product is distributed in the market, it can cause serious harm to consumers. In this study, we investigate the photobiological risks and safety devices against UV exposure of UV germicidal equipment distributed domestically, and propose appropriate test methods for portable UV germicidal equipment based on the research results.

• 청정기술
• /
• 제14권4호
• /
• pp.232-241
• /
• 2008

EU의 WEEE 지침에는 전기전자제품의 생산자들이 반드시 달성하여야 하는 재활용률과 재생률의 목표치가 설정되어 있다. 본 연구에서는 전기전자제품의 생산자들이 개발되는 제품의 재활용가능률과 재생가능률을 산정해 보는데 필요한 부품과 소재들의 재활용률과 재생률의 기준을 만들어 보았다. 먼저 전기전자제품의 재활용공정과 부품 및 소재별 재활용 및 재생특성을 분석해 보았으며, 유럽 현지 업체들의 처리결과에 따른 재활용률과 관련된 자료들을 조사하여 분석하였다. 이러한 결과로 작성된 재활용률과 재생률 DB는 유럽의 전문가의 의견을 반영하여 개선하였다.

• 자원리싸이클링
• /
• 제29권4호
• /
• pp.45-50
• /
• 2020

전기·전자제품 생산업자와 판매업자는 자신이 배포한 장비가 속하는 등급에 해당하는 폐전기·전자제품을 직접 수거하거나 한국전자제품자원순환공제조합에 가입하여 공제조합이 대리할 의무를 이행하도록 할 수 있다. 본 연구에서는 분담금의 요율체계를 검토하고, 파악한 문제점과 이에 대한 개선방안을 제시한다. 첫째, 수집비 및 운반비에 대해 회수유형별 작업을 고려하여 표준작업 및 시간을 설정해야 한다. 둘째, 리사이클링센터의 선별방식에 차이가 있으므로, 이들 방식의 차이와 처리하는 제품군 특성을 반영하여 할당인자에 대한 표준원가를 설정해야 한다. 셋째, 방문수거비 예측모형에서 최소값이 아닌 중앙값 또는 평균값으로 결정하여 충분한 규모의 예산을 확보해야 한다. 본 연구는 공제회원이 공제조합에 납부하는 분담금의 문제점을 살펴보고 이에 대한 개선방안을 제시하였다.

• 성인간호학회지
• /
• 제15권2호
• /
• pp.305-315
• /
• 2003

Purpose: To describe the status of the laboratory facilities, equipment and expenses for practice in a four-year nursing schools and to analyze mandatory requirements for laboratory facilities and equipment. Method: A descriptive survey research design was used. The participants were 49 of the 4-year nursing schools across the nation. The data were collected by e-mail. The return rate for questionnaires was 63.3% (n=31). Result: In 2001 the total expenses for laboratory practice were 21,865,230 won and the average per student was 102,418 won. Types of laboratories included single and complex. The mean size for laboratories was $318.7m^2$ and mean size for laboratories for fundamental nursing was $161.1m^2$. The range for number of students in a laboratory class was 20-30 for eight universities (30.8%). Among required laboratory equipment, items that were deficient in 50% in the universities were mercury and aneroid sphygmomanometers for children, electronic sphygmomanometers, Bell type fetal stethoscopes, sheepskin, beds for children, for gynecology, and electronic hilo beds. Among the elective equipment, items that were deficient in 50% of the universities were $O^2$ tents, Blackmore tubes, retractors, hot-water supply, and incentive spirometers. The number of items that needed to add to the equipment were 10 for required equipment and 22 for elective equipment. Conclusion: A standardized mandatory list of equipment for laboratory facilities and expenses for practice in 4-year nursing schools needs to be developed.