• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.6
• /
• pp.581-590
• /
• 2016

This paper proposes an efficient collision avoidance algorithm that a group of RFID readers manage each of their affiliated active RFID tags in a space by establishing wireless network and avoids communication collision between RFID reader to reader and RFID tag to tag, and reader to tag. RF readers operate as wireless network nodes, create synchronous links each other, and can exchange messages. Active tags also are operated communicating each reader devices synchronously, and competing slot position between tags algorithm using unique tag identification number is implemented. Each reader node operates their own reader function different time slot network communication period to prevent collision between readers communication.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.275-282
• /
• 2015

Since a NAND-flash memory is able to keep data during electricity-off and has small cost to store data per bytes, it is widely used on hand-held devices. It is necessary to use an index in order to process mass data effectively on the flash memory. However, since the flash memory requires high cost for a write operation and does not support an overwrite operation, it is possible to reduce the performance of the index when the disk based index is exploited. In this paper, we implement the fixed grid file index and evaluate the performance of the index on various conditions. To do this, we measure the average processing time by the ratio of query operations and update operations. We also the compare the processing times of the flash memory with those of the magnetic disk.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1529-1534
• /
• 2013

Since a NAND-flash memory is able to store mass data in a small sized chip and consumes low power, it is exploited on various hand-held devices, such as a smart phone and a sensor node, etc. To process efficiently mass data stored in the flash memory, it is required to use an index. However, since the write operation of the flash memory is slower than the read operation and an overwrite operation is not supported, the usage of existing index schemes degrades the performance of the index. In this paper, we survey the previous researches of index schemes for the flash memory and classify the researches by the methods to solve problems. We also present the performance factor to be considered when we design the index scheme on the flash memory.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.9
• /
• pp.1307-1312
• /
• 2013

In this paper, alkaline or acidic solution, in particular the principle of electrolysis to oxidize the metal surface to form a device isolation film is developed. In the past, mainly in the form of pulse voltage is applied to the anode only a unipolar method, but in this paper by using the H-bridge to the amount of the positive (+) voltage and the negative supply voltage, alternating voltage polarity devices were fabricated according to the characteristics of metal specimens with different electrical conditions to form an oxide film on the device was developed. Supply current variable was used for the PWM modulation, (+) and (-) polarity change of the H-bridge bipolar pulse voltage to supply the was that. As a result, a more uniform pores with unipolar film was formed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.2
• /
• pp.118-122
• /
• 2007

The previous security system was PCI way which has many difficulties for PC novices to use. Moreover the security programs in use are mostly unverified ones as they are using cracks, and are exposed to attacks such as hackers and viruses. Therefore this thesis describes to design the security system of Twofish cryptographic algorithm using USB, which it can be used in general-purpose computers and users can handle it with ease. Users can easily use the security system by using this USB and it is applicable to various security systems that Twofish cryptographic algorithm used in the security system by having variable key length. Also the efficiency of the system can be enhanced as it can perform both encryption and decryption and it has a benefit of downsizing hardware.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.751-756
• /
• 2018

In smart factories and industrial IoT, all facilities in a factory are monitored over the Internet, thereby facility can reduce the downtime and increase the availiability by preventive maintenance before it breaks down. The abnormal conditions of the major facilities in the plant are caused by abnormal temperature rise, vibration, and variations in noise. Consequently, it is critical to develop a very small smart device that is easily installed in a small space to enable real-time monitoring of the vibration status of the facility. In this study, smart devices were developed for smart factory fault prediction and robustness management using ultra small micro-controllers with WiFi capabilities and MEMS acceleration sensors.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1156-1165
• /
• 2017

A high performance interleaved bridgeless boost power factor correction (PFC) rectifier operating under the critical current conduction mode (CrM) is proposed in this paper to improve the efficiency and system performance of various applications, such as nano-grid systems. By combining the interleaved technique with the bridgeless topology, the circuit contains two independent branches without rectifier diodes. The branches operate in interleaved mode for each respective half-line period. Moreover, when operating in CrM, all the power switches take on soft-switching, thereby reducing switching losses and raising system efficiency. In addition, the input current flows through a minimum amount of power devices. By employing a commercial PFC controller, an effective control scheme is used for the proposed circuit. The operating principle of the proposed circuit is presented, and the design considerations are also demonstrated. Simulations and experiments have been carried out to evaluate theoretical analysis and feasibility of the proposed circuit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.81-88
• /
• 2012

Surge protective devices(SPDs) are widely used as a most effective means protecting the electrical and electronic equipment against overvoltages such as lightning and switching surges. When installing SPDs, it is essential that the voltage protection level provided by SPDs should be lower than the withstand voltage of the equipment being protected. But even the proper selection of SPDs are achieved, the voltage at the equipment terminal may be higher than the residual voltage of SPD due to the reflection and oscillation phenomena. This paper was focused on the investigations of the conditions for which the equipment is protected by an SPD taking into account the influences of the protective distance and type of load. The protective effects of SPD with voltage-limiting component were analyzed as functions of types of load and protective distance between the SPD and load. As a result, in the cases of long protective distances, capacitive loads and loads with high resistance, the voltage at the load terminal was significantly higher than the residual voltage of SPD. It was found that the proper installation of SPDs should be carried out by taking into account the protective distance and type of load to achieve reliable protection of electronic equipments against surges.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.275-282
• /
• 1998

In this paper, we designed and fabricated 5-stage microwave solid state power amplifier using balanced amplifier scheme for X-band electronic radar reflector. The used substrate is FR4 and the used active devices are FHX35LC, FLK012WF and FLK022WG. The circuit design and optimization had been carried out through the microwave CAD program CNL2 The measured values show 46dB in gain, input return loss -14.2dB, output return loss -16.6dB and IM3 is 32dBc at designed bandwidth. The measured results are almost agreed with the simulated values.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.234-237
• /
• 2001

FeSi$_2$/Si Layer were grown using FeSi$_2$, Si wafer by the chemical transport reaction method. The directoptical energy gap was found to be 0.871ev at 300 K. The Hall effect is a physical effect arising in matter carrying electric current in the presence of a magnetic field. The effect is named after the American physicist E. H. Hall, who discovered it in 1879. In this paper, we study electrical properties of FeSi$_2$/Si layer And then we measured Hall coefficient Hall mobility, carrier density and Hall voltage according to variation magnetic field and temperature, Because of important Part for it application Various phase of silicide is formed at the metal-Si interface when transition metal contacts to Si. Silicides belong to metallic or semiconducting according to their electrical and optical properties. Metallic silicides are used as gate electrodes or interconnections in VLSI devices. Semiconducting silicides can be used as a new material for IR detectors because of their narrow energy band gap.