• Electrical & Electronic Materials
• /
• 제10권9호
• /
• pp.922-929
• /
• 1997

As the size of semiconductor devices shrinks in the horizontal as well as vertical dimension it is difficult to estimate the transport-velocity of electron because they drift in non-equilibrium with a few scattering. In this paper HYbrid Monte Carlo simulator which employs the drift-diffusion model for hole-transport and Monte Carlo model for electron-transport in order to reduce the simulation time and increase the accuracy as well has been developed and applied to analyze the electron-transport in InAlAs/InGaAs HBT which is attractive for an ultra high speed active device in high speed optical fiber transmission systems in terms of the velocity and energy distribution as well as cutoff frequency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제16권6호
• /
• pp.496-500
• /
• 2003

Molecular self-assembled of surfactant viologen are of recent interest because they can from functional electrodes as well as micellar assemblies, which can be profitably utilized for display devices, photoelectrochemical studies and electrocatalysis as electron acceptor or electron mediator. Fromherz et al studied the self-assembly of thiol and disulfide derivatives of viologens bearing long n-alkyl chains on Au electrode surface[1]. The electrochemical behavior of self-assembled viologen monolayer has been investigated with QCM, which has been known as nano-gram order mass detector. The self-assembly process of viologen was monitored using resonant frequency(ΔF) and resonant resistance(R). The redox process of viologen was observed with resonant frequency(ΔF).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제19권3호
• /
• pp.216-221
• /
• 2006

Lifetime control technique by proton implantation has become an useful tool for production of modern power devices. In this work, punch-through type diodes were irradiated with protons for the high speed power diode fabrication. Proton irradiation which was capable of controlling carrier's lifetime locally was carried out at the various energy and dose conditions. Characterization of the device was performed by current-voltage, capacitance-voltage and reverse recovery time measurement. We obtained enhanced reverse recovery time characteristics which was about $45\;\%$ of original device reverse recovery time and about $73\;\%$ of electron irradiated device reverse recovery time. The measurement results showed that proton irradiation technique was able to effectively reduce minority carrier lifetime without degrading the other characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2014

Recently, military vehicles that are being driven are equipped with a lot of electronic devices. The military vehicles are easily exposed to impact. Thus, they have to be designed robustly to ensure that the stability of the vehicle and the electronic equipment. In order to design the vehicles efficiently, the dynamic characteristics of a military vehicle have to be identified exactly. The main frame has a significant role to the dynamic characteristics of the vehicle. Thus, this research was progressed mainly with the frame. By carrying out road tests, the characteristics could be identified. Also, based on the characteristics, we constructed FE model of the frame and performed the analysis of the dynamic characteristics of the vehicle.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2136-2152
• /
• 2012

The growth of Internet technologies and the widespread use of mobile devices have been paving the way for the increasing use of conferencing services. Two types of systems have been designed to provide conferencing services: 1) a conferencing system using session control over a peer-to-peer (P2P) network and 2) an IP Multimedia Subsystem (IMS) conferencing system. The IMS conferencing system was developed to adapt to a server-based centralized system, whereas the benefits of the P2P operational model in providing such conference services are widely acknowledged. However, each system provides conferencing services only to its own users. Therefore, in this paper, we propose an interworking model to support multimedia conferencing service between the P2P environment and IMS networks. We also introduce protocol architecture and some service scenarios. To verify this system model and the design architecture, we perform an actual implementation and show experienced test results.

• Proceeding of EDISON Challenge
• /
• 제3회(2014년)
• /
• pp.478-482
• /
• 2014

Graphene have renewed considerable interest in inorganic, two-dimensional materials for future electronics. However, graphene does not have a bandgap, it is limited to apply directly to transistors and logic devices. Hence, other layered materials such as molybdenum disulphide ($MoS_2$) have been investigated to address this challenge. Here, we find that the nature of contacts plays a more important role than the semiconductor itself. In order to understand the nature of $MoS_2$/metal contacts, we perform density functional theory electronic structure calculations based on linear combination of atomic for the geometry, bonding, binding energy, PDOS, LDOS and electronic structure. We choose Au as a contact metal because it is the most common contact metal. In this paper, we demonstrate $MoS_2$/Au contacts have a more promising potential in flexible nanoelectronics than $MoS_2$ itself.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 1996

The drain current of the MOSFET in the off state(i.e., Id when Vgs=0V) is undesired but nevertheless important leakage current device parameter in many digital CMOS IC applications (including DRAMs, SRAMs, dynamic logic circuits, and portable systems). The standby power consumed by devices in the off state have added to the total power consumed by the IC, increasing heat dissipation problems in the chip. In this paper, hot-carrier-induced degra- dation and gate-induced-drain-leakage curr- ent under worse case in P-MOSFET\`s have been studied. First of all, the degradation of gate-induced- drain-leakage current due to electron/hole trapping and surface electric field in off state MOSFET\`s which has appeared as an additional constraint in scaling down p-MOSFET\`s. The GIDL current in p-MOSFET\`s was decreased by hot-electron stressing, because the trapped charge were decreased surface-electric-field. But the GIDL current in n-MOS77T\`s under worse case was increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.10-12
• /
• 1996

AlGaAs/GaAs Heterojunotion Bipolar Transistors (HBTs) with various emitter areas were fabricated and the device size dependence on the current gain was examined. With the different emitter areas, the passivated devices having the same peripheral length were fabricated and measured. The measured base current density in the Gummel plots shows an ideality factor of nearly 2. It is found that as the emitter area becomes small, the base current density with the ideality factor of 2 increases linearly, and as the emitter perimeter/area ratio becomes large, the surface recombination current density component increases. The current gain performance in AlGaAs/GaAs HBTs is mainly determined by either the larger emitter area or the smaller ratio of the emitter perimeter to the emitter area. These results will be compared with experimental works for GaInP/GaAs HBTs

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.91-96
• /
• 2005

We report the efficient red light-emitting diodes based on the fluorescent dye 4-(dicyanomethylene)-2-i-propyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTI) and 5,6,11,12-tetraphenyl naphthacene (rubrene) codoped in the tris(8-hydroxyquinoline)aluminum $(Alq_3)$. Luminance efficiency of 2.2 cd/A with a Commission International De L'Eclairage (CIE) chromaticity coordinate of x, y = (0.640, 0:350) are achieved at the driving current density of $20\;mA/cm^2$. Adding the rubrene to the DCJTI in tris(8-hydroxyquinoline)aluminum $(Alq_3)$, the red color purity and luminance efficiency improved comparing to the DCJTI only doped devices because the rubrene molecules assist the polarization effect of DCJTI by molecular interaction and enhance the energy transfer from $(Alq_3)$ to DCJTI.

• Electrical & Electronic Materials
• /
• 제9권9호
• /
• pp.911-917
• /
• 1996

Platinum thin films were deposited on Si-wafer by DC rnagnetron sputtering for RTD (resistance thermometer devices). We investigated the physical and electrical characteristics of these films under various conditions, the input power, working vacuum, temperature of substrate and also after annealing these films. The deposition rate was increased with increasing the input power but decreased with increasing Ar gas pressure. The resistivity and sheet resistivity were decreased with increasing the temperature of substrate and the annealing time at 1000.deg. C. At substrate temperature of >$300^{\circ}C$, input power of 7 w/cm$^{2}$, working vacuum of 5 mtorr and annealing conditions of 1000.deg. C and 240 min, we obtained 10.65.mu..ohm..cm, resistivity of Pt thin films and 3800-3900 ppm/.deg. C, TCR(temperature coefficient of resistance). These values are close to the bulk value. These results indicate that the Pt thin films deposited by DC magnetron sputtering have potentiality for the development of Pt RTD temperature sensor.