• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.369-382
• /
• 2002

The increase of vehicles stagnations leads to the increasing attention to the way customers pay and a large number of Projects on electronic cash system. Tranport system is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Recently many research on a system which provides contact in order to protect driver's vehicle passage have been carried out. And some potential problems from that system are being reviewed by electronic cash system. In this papers, we suggest RF protocol developing technology using the concept of electronic cash. ATM electronic cash developing is consist of component of pre-developed coin throw, integration of component using its, and production of more requirement-satisfactory ITS solution. Result increase 15-40% pre-type vehicles stagnations. Especially, we expect this proposed concept would be well adapted to our national environments.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.47-54
• /
• 2020

To develop the bright-vivid red- and yellow-inorganic fluorescent pigments with high luminescence properties, A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were synthesized by a water assisted solid state reaction (WASSR) method and a conventional solid state reaction method. Although impurity peaks corresponding to the AVO₃ and AV₃O₈ (A = K, Rb, and Cs) were observed in all samples prepared, the trigonal structure A₃V₅O₁₄ (A = K and Rb) and orthorhombic structure Cs₂V₄O₁₁ were successfully obtained as a main phase. These inorganic pigments showed the broad absorption band (under 550 nm) originated from CT transitions of VO₄ polyhedron, and the strong broad red- and green-emission bands due to ³T₂ → ¹A₁ and ³T₁ → ¹A₁ transitions of the [VO₄]^3- group. The A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ pigments showed a bright-vivid red- and yellow-body color, where the a* values of the A₃V₅O₁₄ (A = K and Rb) were +35.5 and +45.9, respectively, and b* value of Cs₂V₄O₁₁ pigments was +50.3. The L* values of the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were over +45. These results indicate that the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments could be an attractive candidate as a bright-vivid red- and yellow inorganic pigments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.43-49
• /
• 2003

Low-temperature polysilicon (LTPS) technology has continued to mature with the passing of each year since LTPS mass production began. The integration of complex circuits has become possible with advances in microprocessing, leading to the realization of panels with highly advanced functions. At the same time, efforts have been made to meet market demands for lower costs, thereby boosting competitive strength. Today, LTPS-TFT LCDs have become standard equipment for the monitors of digital still cameras, and inroads are being made into the massive cellular phone market. Micro displays such as electronic viewfinders, which were previously only possible with high-temperature polysilicon technology, can now also be made with LTPS, thus expanding the scope of the technology. AMOLED displays using the LTPS-TFT as a back plane are also approaching the stage of industrialization. The hidden potential for the OLED to replace the familiar LCD has prompted Widespread anticipation for this emerging technology. This paper reflects on the history of LTPS technology, then looks forward to its future prospects and suggests a variety of potential fields of application.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.8
• /
• pp.1004-1009
• /
• 2014

The redundancy allocation problem has usually considered only the component redundancy at the lowest-level for the enhancement of system reliability. A system can be functionally decomposed into system, module, and component levels. Modular redundancy can be more effective than component redundancy at the lowest-level because in modular systems, duplicating a module composed of several components can be easier, and requires less time and skill. We consider a multi-level redundancy allocation problem in which all cases of redundancy for system, module, and component levels are considered. A tabu search of memory-based mechanisms that balances intensification with diversification via the short-term and long-term memory is proposed for its solution. To the best of our knowledge, this is the first attempt to use a tabu search for this problem. Our tabu search algorithm is compared with the previous genetic algorithm for the problem on the new composed test problems as well as the benchmark problems from the literature. Computational results show that the proposed method outstandingly outperforms the genetic algorithm for almost all test problems.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.691-698
• /
• 2001

Component-based development methods are regarded as one of the most important tools for us to cope with ever-increasing software complexity and, at the same time, to improve productivity in software development. This paper presents how to generate test-cases for integrated software from those of member components and how to validate composition of components, by the analysis of domain relations of components. This paper shows the applicability of the proposed technique by the real experiment. This study is based on the dataflow systems architecture and process components, and the technique developed here is an application of domain testing technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.99-102
• /
• 1997

An electronic nose system is an instrument designed far mimicking human olfactory system. It consists generally of gas (odor) sensor array corresponding to olfactory receptors of human nose and artificial neural network pattern recognition technique based on human biological odor sensing mechanism. Considerable attempts to develop the electronic nose system have been made far applications in the fields of floods, drinks, cosmetics, environment monitoring, etc. A portable electronic nose system has been fabricated by using oxide semiconductor gas sensor array and pattern recognition technique such as principal component analysis (PCA) and back propagation artificial neural network The sensor array consists of six thick film gas sensors whose sensing layers are Pd-doped WO$_3$ Pt-doped SnO$_2$ TiO$_2$-Sb$_2$O$_3$-Pd-doped SnO$_2$ TiO$_2$-Sb$_2$O$_{5}$-Pd-doped SnO$_2$+Pd filter layer, A1$_2$O$_3$-doped ZnO and PdCl$_2$-doped SnO$_2$. As an application the system has been used to identify CO/HC car exhausting gases and the identification has been successfully demonstrated.d.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.882-885
• /
• 2004

Organic molecules have many properties that make them attractive for electronic applications. We have been examining the progress of memory cell by using molecular-scale switch to give an example of the application using both nanoscale components and Si-technology. In this study, molecular electronic devices were fabricated with amion style derivatives as redox-active component to compare to the devices using Zn-Porphyrin derivatives. This molecule is amphiphilic to allow monolayer formation by the Langmuir-Blodgett (LB) method, and then this LB monolayer is inserted between two metal electrodes. According to current-voltage (I-V) characteristics, it was found that the devices show remarkable hysteresis behavior and can be used as memory devices at ambient conditions, when aluminum oxide layer was existed on bottom electrode. Diode-like characteristics were measured only, when Pt layer was existed as bottom electrode. It was also found that this metal layer interacts with the organic molecules and acts as a protecting layer, when thin Ti layer was inserted between the organic molecular layer and the top Al electrode. These electrical properties of the devices may be applicable to active components for the memory and/or logic gates in the future.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.761-767
• /
• 2011

The objective of this study was to predict total bacteria count of pork meats by using the portable electronic nose systems developed throughout two stages of the prototypes. Total bacteria counts were measured for pork meats stored at $4^{\circ}C$ for 21days and compared with the signals of the electronic nose systems. PLS(Partial least square), PCR (Principal component regression), MLR (Multiple linear regression) models were developed for the prediction of total bacteria count of pork meats. The coefficient of determination ($R_p{^2}$) and root mean square error of prediction (RMSEP) for the models were 0.789 and 0.784 log CFU/g with the 1st system for the pork loin, 0.796 and 0.597 log CFU/g with the 2nd system for the pork belly, and 0.661 and 0.576 log CFU/g with the 2nd system for the pork loin respectively. The results show that the developed electronic system has potential to predict total bacteria count of pork meats.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.989-998
• /
• 2020

Recently, demands for large-capacity electronic loads are increasing in various industries such as a reliability test for the performance of a DC power supply device or a dummy-load for improving the stability of an independent microgrid to be actively built in the future. The electronic load required in these various fields requires an operation such as a continuously variable resistance load while minimizing the switching harmonic component generated in the electric load current in order to reduce the influence of interference from the load peripheral device. Electronic loads require a system that minimizes switching current ripple for load control. Therefore, in this paper, we propose a three-level module converter structure to reduce the current ripple of an electronic load, and a multilevel interleaved power converter topology to reduce the current ripple. The validity of the proposed electronic load, 3-level 6 interleaver converter, was verified by simulation and experiment. In addition, the user's convenience was provided by applying the emotional command curve interface method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.103-118
• /
• 2022

With the recent increase in demand for electronic devices, multi-layer ceramic capacitors (MLCCs) have become the most important core component. In particular, the next-generation MLCC with extremely high reliability is required for the 4^th industrial revolution and electric vehicle applications. Therefore, it is necessary to develop dielectric ceramic materials with high dielectric properties and reliability. During the decades, electrical properties of BaTiO₃ based dielectric ceramics, which have been widely used in MLCC industrial field, have been improved by microstructure and defect chemistry control. However, electrical properties of BaTiO₃ have reached their limits, and new types of dielectric materials have been widely studied. Based on these backgrounds, this report presents the recent development trends of BaTiO₃-based dielectric materials for the next-generation MLCCs, and suggests promising candidates to replace BaTiO₃ ceramics.