• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.238-239
• /
• 2013

We studied the thermal and electron properties of covalent one-dimensional (1D) monatomic linear chains of carbon, particularly carbyne. We found the ${\alpha}$-carbyne (Polyyne, alternating single and triple C-C bond co-existing) is more stable than ${\beta}$-carbyne (Equally-spaced based on C-C double bond) energetically. As investigation of electron density of states (EDOS), polyyne and cumulene had different electronic characteristic, which corresponding metallic and semiconducting respectively. We also calculate the phonon dispersion, phonon density of states (PDOS) and phonon transmission of carbynes.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.602-607
• /
• 2004

This paper describes the characteristics of Ru-Zr alloy gate electrodes deposited by co-sputtering. The various atomic composition was made possible by controlling sputtering power of Ru and Zr. Thermal stability was examined through 600 and 700 $^{\circ}C$ RTA annealing. Variation of oxide thickness and X-ray diffraction(XRD) pattern after annealing were employed to determine the reaction at interface. Low and relatively stable sheet resistances were observed for Ru-Zr alloy after annealing. Electrical properties of alloy film were measured from MOS capacitor and specific atomic composition of Zr and Ru was found to yield compatible work function for nMOS. Ru-Zr alloy was stable up to $700^{\circ}C$ while maintaining appropriate work function and oxide thickness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.99.1-99.1
• /
• 2016

The materials for an electronic packaging provide diverse important functions including electrical contact to transfer signals from devices, isolation to protect from the environment and a path for heat conduction away from the devices. The packaging materials composed of metals, ceramics, polymers or combinations are crucial to the device operating properly and reliably. The demand of effective charge and heat transfer continuous to be challenge for the high-speed and high-power devices. Nanomaterials including graphene, carbon nanotube and boron nitride, have been designed for the purpose of exploiting the high thermal, electrical and mechanical properties by combining in the matrix of metal or polymer. In addition, considering the inherent electrical and surface properties of graphene, it is expected that graphene would be a good candidate for the surface layer of a template in the electroforming process. In this talk, I will present recent our on-going works in nanomaterials for microelectronic packaging: 1) porous graphene/Cu for heat dissipations, 2) carbon-metal composites for interconnects and 3) nanomaterials-epoxy composites as a thermal interface materials for electronic packaging.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.52-57
• /
• 2006

Precision thin film resistors using evanohm R alloy were fabricated by do magnetron sputtering method. The physical and electrical properties of the resistors were studied after treatment of thermal annealing. The crystallization of the film was increased as the annealing temperature increase. Diffusion and oxidation of Cr and Al elements were occurred into the film surface. The minimum TCR values of 10.46 ppm/$^{\circ}C$ and 10.65 ppm/$^{\circ}C$ were measured at the annealing temperatures of $200^{\circ}C$ and $300^{\circ}C$, respectively. We are conducting additional studies to improve characteristics of our resistors for practical device application.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.334-340
• /
• 1993

The physico-chemical properties and characteristics after thermal treatment of natural zeolite from Kampo area were studied. The physico-chemical properties of natural zeolite were studied by investigating chemical composition, x-ray diffraction pattern(XRD), scanning electronic microscope(SEM), infrared spec-tra(IR), thermal analysis(TA), and cation exchange capacity(C.E.C.), and the characteristics of natural zeo-lite after thermal treatment from $400^{\circ}C$ to $900^{\circ}C$ were compared with the natural zeolite. This study showed that clinoptilolite was the predominant costituent in natural zeolite, and the natural zeolite contained a little amount of quartz and feldspar as impurities. Zeolite mineral was seen to develop slowly by the natural alternation of volcanic ash considering the almost amorphous crystal structure. The more temperature of ther-mal treatment increased, the more adsorption capacity decreased, considering the fact that the hydroxy peak diminished on infrared spectra, and that cation exchange capacity also decreased distinctly.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.21-23
• /
• 1994

By adding La₂O₃ to optical multicomponent glass composition, after making mother glass and core fiber that enable to enlarge the infrared transmittance region, then surveyed the optical properties. Through thermal analysis of the glass abstained by melt-quenching after selecting stable basic composition on devitrification and replace SiO₂ by 4-12wt% La₂O₃. As La₂O₃ increases up to l2wt% transition temperature, refractive index, density, deformation temperature increased, whereas thermal expansion coefficient decreased. As a result of inspectig transmittance in UV/VIS/IR region, visable region indicated the decrease of transmittance by increasing the La₂O₃ and transmittance region was enlarged by increasing the La₂O₃ in IR region. Also, fabricate core fiber at 820℃ and severy the optical loss we could fact that La₂O₃ composition added 12wt% showed the minimum optical loss.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.182-185
• /
• 2010

$Pb_{0.99}[(Zr_{0.6}Sn_{0.4})_{0.9}Ti_{0.1}]_{0.98}Nb_{0.02}O_3$ (PNZST) thin films were deposited by radio frequency magnetron sputtering on a $(La_{0.5}Sr_{0.5})CoO_3$ (LSCO)/Pt/Ti/$SiO_2$/Si substrate using a PNZST target with an excess PbO of 10 mole%. The thin films deposited at the substrate temperature of $500^{\circ}C$ crystallized to a perovskite phase after rapid thermal annealing (RTA). The thin films, which annealed at $650^{\circ}C$ for 10 seconds in air, exhibited good crystal structures and ferroelectric properties. The remanent polarization and coercive field of the fabricated PNZST capacitor were approximately $20uC/cm^2$ and 50 kV/cm, respectively. The reduction of the polarization after $2.2\;{\times}\;10^9$ switching cycles was less than 10%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.322-322
• /
• 2008

Low-temperature co-fired ceramics (LTCC) have turned out to be very promising technology in accordance with the rapid developments in semiconductor technology. The demands for compact electrical assemblies, smaller power loss as well as high signal density can be fulfilled by LTCC. And for the multi-layered ceramic devices with embedded passive components such as high dielectric constant decoupling capacitor, LTCC materials require the several conditions to avoid delamination and internal cracks. For the present study, diopside-based glass is chosen as the LTCC substrate material in view of its high coefficient of thermal expansion (CTE). From the experimental resultsn the influence of each element on the CTE change can be revealed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 1993

This Paper studies on thermal oxidation of alumina filled epoxy network polymer used in Extra-High voltage application. The thermal oxidation of surface has investigated by yellow index variation and various electrical properties which are surface resistivity, tracking resistance and AC dielectric strength are estimated by yellow index.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.545-548
• /
• 2002

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$(BSCT) (x=0.10, 0.15, 0.20) powders were prepared by the sol-gel method and BSCT thick films were fabricated by the screen-printing method. The structural properties as a faction of the composition ratio were studied. As a result of the differential thermal analysis (DTA), exothermic perk was observed at around $860^{\circ}C$ dne to the formation of the polycrystalline perovskite phase. The BSCT thick films sintered at $1350^{\circ}C$ for 2h showed the average grain size of $2{\sim}7{\mu}m$. The average thickness of BSCT thick films, obtained by 3 times of screen-printing, was approximately $85{\mu}m$.