• Journal of Astronomy and Space Sciences
• /
• 제41권1호
• /
• pp.17-23
• /
• 2024

The safety of electronic components used in aerospace systems against cosmic rays is one of the most important requirements in their design and construction (especially satellites). In this work, by calculating the dose caused by proton beams in geostationary Earth orbit (GEO) orbit using the MCNPX Monte Carlo code and the MULLASSIS code, the effect of different structures in the protection of cosmic rays has been evaluated. A multi-layer radiation shield composed of aluminum, water and polyethylene was designed and its performance was compared with shielding made of aluminum alone. The results show that the absorbed dose by the simulated protective layers has increased by 35.3% and 44.1% for two-layer (aluminum, polyethylene) and three-layer (aluminum, water, polyethylene) protection respectively, and it is effective in the protection of electronic components. In addition to that, by replacing the multi-layer shield instead of the conventional aluminum shield, the mass reduction percentage will be 38.88 and 39.69, respectively, for the two-layer and three-layer shield compared to the aluminum shield.

• E2M - 전기 전자와 첨단 소재
• /
• 제24권4호
• /
• pp.22-31
• /
• 2011

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.90-92
• /
• 2005

Lightning surge damages of low voltage equipments in building are increasing due to increase in electrical and communication networks in the information-oriented society. And electronic equipments contained electrical circuits with semiconductor are very weak against lightning surge. The surge protective devices for electronic circuit in electronic equipments and AC power lines are becoming more widely. To achieve effective method of surge protection, there are needs for correlation between lightning surge protective effect of electronic equipment and installation method of surge protective device. This paper describes as a result of experiments for correlation between lightning surge protective effect and installation of surge protective device and Earth Leakage Breaker.

• 한국도서관정보학회지
• /
• 제32권1호
• /
• pp.171-200
• /
• 2001

Electronic Copyright Management System is the technical solution to protect copyright and to manage the distribution of digital contents in network environment. This paper examined the theoretical plane of Electronic Copyright Management System and analyzed the characteristics and the protection technologies of some of the commercial systems. And this paper investigated the essential protection technologies and payment systems that is needed to develop and manage the successful system in the future. Finally this study suggested the fundamental function model of Electronic Copyright Management System.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.1023-1026
• /
• 2013

위 펄스형 방사선에 노출된 전자장비는 전자소자 내부에서 발생되는 전자-정공쌍(EHP)과 이들이 형성한 순간 광전류로 Upset, Latchup, Burn out 과 같은 다양한 피해를 입게 된다. 이와같은 손상은 군무기체계나 우주항공 장비의 경우 군전력 손실이나 장비의 기능정지로 나타나 국가적으로 큰 손실을 초래할 수 있다. 본 연구에서는 펄스형 감마방사선으로 부터 전자장비/소자를 보호하기 위한 방호기술개발의 일환으로 '방사선 감지 및 제어장치'를 구현하고 대표적으로 군장비에 사용되는 전자소자에 대한 기능검증을 시도하였다. 펄스 방사선에 Latchup 및 Burn out 손상특성을 나타내는 LM118 소자에 개발한 '방사선 감지 및 제어장치'를 적용하여 펄스방사선 조사시험을 수행한 결과 LM118이 안전하게 보호됨을 확인하였다.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.179-184
• /
• 2010

The digital substation automation system has contributed hugely to increasing the stability of power systems by providing not only protection and control of power systems but diagnostic features alongside them. Digital substation automation systems in the scale of substations consist of integrated operation systems and intelligent electronic devices. The main intelligent electronic devices currently in use are digital protection relays and the bay controllers in Gas insulated switchgears. Proficiently accomplishing the coordination of protection within the power system as a means of ensuring reliability and contriving for the stability of power supply through connection of function, the application of bay controllers is crucial, which collectively manage the protection relay at the bay level in order to achieve both. In this research, the bay controllers to be used in high-voltage Gas insulated switchgear has been localized, and in particular, the logic function and editor required in order to minimize the complicated hardware-like cable connections in the local panel have been developed. In addition, to ensure the strength and reliability of the bay controller hardware developed herein, the type tests from KERI have been successfully completed.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1729-1742
• /
• 2017

In designing System Protection Schemes (SPSs) in power systems, protecting transmission network against extreme undesired conditions becomes a significant challenge in mitigating the transmission line overloading. This paper presents an intelligent Special Protection and Control Scheme (SPCS) using of Differential Evolution with Adaptive Mutation (DEAM) approach to obtain the optimum generation rescheduling to solve the transmission line overloading problem in system contingency conditions. DEAM algorithm employs the attraction-repulsion idea that is applied in the electromagnetism-like algorithm to support the mutation process of the conventional Differential Evolution (DE) algorithm. Different N-1 contingency conditions under base and increase load demand are considered in this paper. Simulation results have been compared with those acquired from Genetic Algorithm (GA) application. Minimum severity index has been considered as the objective function. The final results show that the presented DEAM method offers better performance than GA in terms of faster convergence and less generation fuel cost. IEEE 30-bus test system has been used to prove the effectiveness and robustness of the proposed algorithm.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.298-302
• /
• 2005

This paper presents the protection effect of SPDs according to installation conditions. To develop the effective protection countermeasures of information and communication equipments against lightning surges, actual-sized experiments in relation to the protection effects on the installation positions of surge protective devices(SPDs), the length of branch circuit the materials and long of conduit were conducted. The best method for protecting the electronic equipments from surges is to install the SPD at the front point of the devices to be protected. The installation method of the metal conduit bonded with common ground conductor were more effective than that of the PVC conduit.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.775-780
• /
• 2004

In this paper, we propose a simple protection scheme for error prone bit positions of turbo codes using the error detection capability of the CRC, which is almost always employed in practical systems. The proposed scheme based on bit flipping with CRC offers flexibility on selecting the level of protection. Also, not having send additional parity bits or discarding useful bit positions, it offers the best error performance for a given level of protection.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.357-360
• /
• 1996

MgO protection layer in ac PDP(plasma display panel) prevents the dielectric layer from ion bombarding in discharge plasma. The MgO layer also has the additional important role in lowering the firing voltage due to a large secondary electron emission coefficient. Until now, the MgO protection layer is mainly prepared by E-beam evaporation. In this study, MgO protection layer is prepared on dielectric layer of ac PDP cell by reactive R.F magnetron sputtering with Mg target under various conditions of oxygen partial pressure. Discharge characteristics of PDP is also studied as a parameter of MgO preparation conditions. The sputtered MgO shows the better discharge characteristics compared with MgO deposited by E-beam evaporator.