• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3623-3627
• /
• 2012

인터넷이 보급된 이후로 현대사회는 본격적인 정보화시대에 진입하게 되었다. 정보화시대에 발 맞춰 인터넷은 유선인터넷에서 무선인터넷으로 발전하게 되었다. 무선인터넷의 수요가 급증하자 기존에 사용된 2.4GHz대역의 통신은 포화상태에 이르게 되었으며 효율과 성능이 현저히 떨어지게 되었다. 이에 따라 5GHz대역의 통신이 주목을 받게 되었다. 본 논문에서는 5GHz대역의 통신이 가능한 U-slot 마이크로스트립 안테나를 HFSS(High Frequency Structure Simulator)를 통해 분석 및 설계하였다. 설계된 안테나를 유전율 4.4의 FR4-epoxy기판을 이용해 제작하고 최종적으로 회로망 분석기(Network Analyzer)를 통해 안테나 특성을 평가, 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.175-181
• /
• 2018

The array patterns of a patch array antenna were calculated using an active element pattern (AEP) method that considers ground edge effects. The classical equivalent radiation model of the patch antenna, which is characterized by two radiating slots, was adopted, and the AEPs that include mutual coupling were precisely calculated using full-wave simulated S-parameters. To improve the accuracy of the calculation, the edge diffraction of a ground plane was incorporated into AEP using the uniform geometrical theory of diffraction. The array patterns were then calculated on the basis of the computed AEPs. The array patterns obtained through the conventional AEP approach and the AEP method that takes ground edge effects into account were compared with the findings derived through full-wave simulations conducted using a High Frequency Structure Simulator (HFSS) and FEKO software. Results showed that the array patterns calculated using the proposed AEP method are more accurate than those derived using the conventional AEP technique, especially under a small number of array elements or under increased steering angles.

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.177-182
• /
• 2013

본 논문에서는 L1주파수대역(1.575GHz)을 사용하는 보안등제어기 내장형 무선 모듈에 적용 가능한 PCB(Printed Circuit Board) 인쇄형 GPS안테나를 제안하였다. 제안된 안테나는 삽입형 급전(insertion feeding)을 가지는 마이크로스트립 패치안테나를 기본구조로 하였다. 특히 임피던스 매칭을 위해 윗면에 좌/우 2개의 비대칭형 슬롯을 삽입하였으며, 아랫면에는 대역폭 증가와 주파수설정을 위하여 한 쪽 끝이 개방된 슬롯과 단락점(shorting point)을 적용하였다. 측정 결과 설계 목표로 한 GPS주파수 L1대역에서 90%의 방사효율과 4.8dBi 이상의 이득을 얻을 수 있었다.

• 대한전자공학회논문지TC
• /
• 제41권12호
• /
• pp.93-102
• /
• 2004

본 논문은 개구면 결합 공진기 급전 마이크로스트립 패치 안테나에 대하여 간결하면서도 정확한 등가회로 모델을 추출하기 위한 일반적인 전자기 이론을 제안하였다. 그리고 등가회로는 이상적인 트랜스, 어드미턴스, 그리고 전송선으로 구성된다. 관련소자들의 값은 복소전력 개념, Fourier 변환, Fourier 급수, 그리고 spectral-domain immittance-approach를 적용하여 계산된다. 본 논문에서는 이 방법을 이용하여 안테나의 입력 임피던스를 구하고, 기존 논문에서 발표된 계산값, 그리고 측정값들과 비교하였다. 기존의 연구 결과와의 정확한 일치는 본 논문이 제안한 등가회로 모델의 간결성과 정확성을 입증해 준다.

• 반도체디스플레이기술학회지
• /
• 제17권2호
• /
• pp.20-25
• /
• 2018

In this paper, we have designed circularly polarized array antenna for 5.8GHz microwave wireless power transmission. To obtain high antenna gain, we studied a single patch antenna, a $2{\times}1$ array antenna, a $2{\times}2$ array antenna, a $2{\times}4$ array antenna, and a $4{\times}4$ array antenna. Commonly, characteristics of each antenna have a frequency of 5.8 GHz and Right Hand Circular Polarization(RHCP) of circular polarization. Also, the results were obtained with the design to each antenna that the return loss was less than -10dB and the axial ratio was less than 3dB. The gain of the antennas was 6.08dBi for a single patch antenna, 9.69dBi for a $2{\times}1$ array antenna, 12.99dBi for a $2{\times}2$ array antenna, 15.72dBi for a $2{\times}4$ array antenna and 18.39dBi for a $4{\times}4$ array antenna. When the elements of the array antenna were increased, it was confirmed that it increased by about 3dBi.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.314-319
• /
• 2015

The conventional geometry of a plate microstrip resonator is made up of a single metallic patch, which is printed on a monolayer dielectric substrate. Its arrangement is simple and easy to make, but it is limited in its functional abilities. Many searches have been realized to improve the bandwidth and the gain of the microstrip resonators. Among the various configurations proposed in the open literature, the stacked geometry seems to be very promising. By appropriate design, it is able to provide the operation in dual frequency mode, wide bandwidth enough and high gain. The theoretical investigations of structures composed of two stacked anti-reflection coatings, enhanced metallic coatings are available in the literature, however, for the stacked configurations involving three metallic coatings or more, not to exact or approximate analysis was conducted due to the complexity of the structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.228-228
• /
• 2009

In stator windings of a 6.6kV rotating machine, internal discharge, corona discharge, and surface discharge are mainly caused by internal voids and insulation degradation. In the case of the discharge spark and electromagnetic pulse generated from a discharge source, we can detect it using various RF resonators like an EM sensor. In order to detect these types of electromagnetic sources, we designed and fabricated a planar patch sensor using a CST-MWS simulation, and PD signals from artificial defected stator windings were also measured by the sensor proposed in this study. Furthermore, In the results of the experiment, it showed similar performance to the HFCT sensor.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.34-37
• /
• 2013

This paper presents a novel ultra-wideband (UWB) antenna that rejects narrow and broad bands and is suitable for wireless communications. The base of the proposed antenna has a circular patch that can cover the UWB frequency range (3.1~10.6 GHz). The interference issues caused by co-existence within the UWB operation frequency are overcome by a design that uses a parallel-coupled asymmetric dual-line with a circular monopole antenna. The proposed antenna showed a stable radiation pattern, realized gain and reflection coefficient lower than -10 dB across the UWB operation bandwidth except for 5.15~5.85 GHz and 7.25~8.4 GHz. The fabrication, simulation, and measurement results obtained for the proposed antenna were in good agreement with the expected values.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.715-718
• /
• 2002

This paper investigated that resonant frequencies of microstrip patch antenna were agile when piezoelectric materials were used as the antenna substrates. When the bias is applied on them, thickness of the substrate is varied according. to the piezoelectric phenomenon. The microstrip patch antenna using Quartz substrate was fabricated and designed by Ensemble v 7.0 simulator. We fabricated the microstrip antennas using Quartz(Y-cut) as its substrate. When the operating frequencies of the microstrip antenna were 7.045GHz, 7.773GHz 8.18GHz the frequency shifts versus electric field, Emax=4[kV/cm], were 21MHz, 26MHz and 28MHz, respectively.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.432-436
• /
• 2003

This paper presents a broadband microstrip antenna design with four U slots on the ground plane by using of genetic algorithm. FDTD method is used as fitness function for antenna analysis, and length of rectangular patch, length of ground plane slot, distance from center point to feed point is used as optimization parameter for maximum bandwidth and minimum size. The measurement result of implemented antenna present bandwidth of 15.63 % and peak gain of 3.61 dBi in the 2.445 GHz, and antenna has a reduced patch size of 54.8 % compare with normal microstrip antenna.