• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1415-1420
• /
• 2014

3D printer is based on an additive manufacturing technology, which helps in creating the three-dimensional object using a 3D drawing. It is used in various fields, because it prints out a variety of three-dimensional products in a short period of time. In this paper, we consider a technique using the FDM(Fused Deposition Modeling) method by dissolving the ABS(Acrylonitrile Butadiene Styrene) resin among a diversity of printing technique and materials. This kind of the 3D printer prints out a product in high temperature and cools down it. In this process, a flection phenomenon is occurred according to the size of the printing product and the surrounding environment. Conventional methods for mitigating this phenomenon maintain the temperature at the optimum level, but they require using additional devices. In order to minimize the flection phenomenon in 3D printing products without additional devices, in this paper, we propose a noble technique, which creates holes on suitable positions when they are designed by 3D drawing tools. Also, we suggest mathematical model for the proposed method, and measure and analyse a printing output using a proposed technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.585-588
• /
• 2003

Bi-2223 superconducting wires were fabricated by stacking, drawing process with different precursor powders and different heat-treatment histories. The precursor powders were 2 kinds of Pb content. And a part of the tapes were experienced pre-annealing process which caused tetragonal structure of Bi-2212 phase to orthorhombic structure of it was during drawing process. We confirmed the transformation of Bi-2212 phase from tetragonal structure to orthorhombic structure and reduction of second phases. AC magnetization analysis were performed in order to investigate the fraction of Bi-2223 phase in Bi-2223/Ag HTS tape. The cross sections of 55 filaments and 61 filaments were investigated after rolled in order to understand deformation mechanism of superconducting cores. We could achieve best Ic of 70 A class at the Bi-2223/Ag tape using low Pb content of precursor powder and experienced pre-annealing process. AC magnetization analysis was useful to investigate the fraction of Bi-2223 phase in the Bi-2223/Ag tape.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.9-17
• /
• 2018

Recently, much attention in electronic financial fraud has been dramatically increased. In particular, the electronic financial fraud has been transforming to social engineering. Despite the growing interest in electronic financial fraud, few guidelines exist how to effectively avoid the serious damage from electronic financial fraud. Moreover, it is rarely investigated cases of victims from financial fraud. Therefore, the purpose of this study is to investigate why financial fraud crime victims occurs. To enhance mundane realism, we conducted Focus Group Interview(FGI) with actual victims from financial fraud crime. Drawing analysis of FGI with actual victims, we found that there are certain damage patterns. Further, we found that the reason why financial fraud crime victims occurs is optimistic biases of humans rooted in behavioral economics. Therefore, this study provides the valuable guidelines and directions to prevent electronic financial fraud based on risk and crisis management perspective. Ultimately, this study is able to help the establishment and implementation of a comprehensive electronic financial fraud prevention policy.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.229-236
• /
• 2016

In this paper, we suggest new technology that can draw characters at a long distance by tracking a hand and analysing the trajectories of hand positions. It's difficult to recognize the shape of a character without discriminating effective strokes from all drawing strokes. We detect end points from input trajectories of a syllable with camera system and localize strokes by using detected end points. Then we classify the patterns of the extracted strokes into eight classes and finally into two categories of stroke that is part of syllable and not. We only draw the strokes that are parts of syllable and can display a character. We can get 88.3% in classification accuracy of stroke patterns and 91.1% in stroke type classification.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.53-60
• /
• 1985

A computer vision system for robot is developed which can recognize a variety of two dimensional complex objects in gray level noisy scenes. the system is also capable of determining the position and orientation of the objects for robotlc manipulation. The hardware of the vision system is developed and a new edge tracking technique is also proposed. The linked edges are approximated to sample line drawing by split and merge algorithm. The system extracts many features from line drawing and constructs relational structure by the concave and convex hull of objects. In matching process, the input obhects are compared with the objects database which is formed by learning ability. Thelearning process is so simple that the system is very flexible. Several examples arc shown to demonstrate the usefulness of this system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.27-30
• /
• 2004

Clad wire , which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used the telecommunications, electric-electronic and military technology industries, among others. It is important to obtain uniform coated rate when producing clad wires. Clad wire drawing process can be influenced on damage and coated rate of core and sleeve by process variables as semi-die angle and reduction in area. Therefore, in this study, the finite-element results established in previous study is used to analyze the effect of the various forming parameters, which included the semi-die angle, reduction in area etc. The coated rate will be predicted with observation copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.122-125
• /
• 2005

Magnesium alloys are expected to be widely used for the parts of structural and electronic applications due to their lightweight and EMI shielding characteristics. While the die casting has been mainly used to manufacture the parts from the magnesium alloys, the press forming is considered as an alternative to the die casting for saving the manufacturing cost and improving the structural strength of the magnesium alloy parts. However, the magnesium alloy has low formability at room temperature and therefore, in many cases, forming at elevated temperatures is necessary to obtain the required material flow without failure. In the present study, square cup deep drawing tests using the magnesium alloy AZ31 sheet were experimentally conducted at various elevated temperatures as well as room temperature, and the corresponding finite-element simulations, which calculated the damage evolution based on the Oyane's criterion, were conducted using the stress-strain relations from the tensile tests at various temperatures. The formability predictability by the finite-element analysis was investigated by comparing the predicted damage distributions over the deformed AZ31 sheet at elevated temperatures with the corresponding experimental deformations with failures.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.40-49
• /
• 1995

This paper presents the performance and problems in analysis method and testing system of Electronic Speckle Pattern Interferometry (ESPI) method, in measuring two - dimensional in-plane displacement. The anyalysis result of measurement by ESPE is quite comparable to that tof measurement by strain gauge method. This implies that the method of ESPE is a very effective tool in non-contact two-dimensional in-plane strain analysis. But there is a controversal point, measurment error. This error is discussed to be affected not by ESPE method itself, but by its analysis scheme of the interference fringe, where the first-order interpolation has been applied to the points of strain measured. In this case, it is turned out that the more errors would be occurred in the large interval of fringe. And so this paper describes a computer method for drawing when the height is available only for some arbitrary collection of points. The method is based on a distance-weighted, last- squares approximation technique with the weight varying with the distance of the data points.

• Journal of Korean Society of Archives and Records Management
• /
• v.20 no.3
• /
• pp.55-76
• /
• 2020

Although most medical institutions in Korea use electronic medical records (EMR), there are many problems in the management and preservation of records when such medical institutions are closed. Records of closed medical institutions need to be systematically managed; however, the rate of closed medical institutions transferring records to public health centers is significantly low. Given that each medical institution has a different system and format, public health centers often cannot access records. In addition, there are no management standards that suit the reality of public health centers and the specificity of EMR. Recently, a strengthened Medical Law has been passed wherein records of closed medical institutions should be kept by health centers; therefore, this study focused on drawing up measures for efficient records management by public health centers. To this end, the relevant laws and management status were identified and an interview was conducted. After analyzing the problems, improvement plans in institutional, technical, and administrative aspects were proposed.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.79-85
• /
• 2021

A standard engineering model that reflects the current organization system and engineering operation process of domestic nuclear power plants was developed based on the Standard Nuclear Performance Model developed by the American Nuclear Energy Association. The level 0 screen, which is the main screen of the engineering model computer system, consisted of an object tree structure, which provided information that is phased down from a higher structure level to a lower structure level (i.e., level 3). The level 1 screen provided information related to the sub-process of the engineering operation, whereas the Level 2 screen provided information related to each engineering operation activity. In addition, the Level 2 screen provided additional functions, such as linking electronic procedures/guidelines, providing electronic performance forms, and connecting legacy computer systems (such as total equipment reliability monitoring system, configuration management systems, technical information systems, risk monitoring systems, regulatory information, and electronic drawing system). This screen level increased the convenience of user's engineering tasks by implementing them. The computerization of an engineering model that connects the entire engineering tasks of an establishment enables the easy understanding of information related to the engineering process before and after the operation, and builds a foundation for the enhancement of the work efficiency and employee capacity. In addition, KHNP developed an online training module, which operates as an e-learning process, on the overview and utilization of a standard engineering model to expand the understanding of standard engineering models by plant employees and to secure competitiveness.