• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.259-261
• /
• 2015

안전한 항행정보 서비스를 제공하기 위해서는 전자해도, AIS정보, 항로표지정보, 해사안전정보, 날씨정보, 조류정보 등과 같은 다양한 데이터가 융합된 S-100 표준 기반의 e-Navigation 시스템이 구축되어야 한다. S-101 전자해도는 e-Navigation 시스템을 구축하기위해 선행되어야할 작업이며 S-101 전자해도를 구현하기 위해서는 S-100 General Portrayal Model의 Portrayal Engine에서 생성한 Drawing Instruction 집합을 분석하여 Rendering Engine을 구현해야 한다. 본 논문에서는 기존 S-57 전자해도와 S-101 전자해도의 Drawing Instruction을 분석하여 S-101 전자해도 구현을 위한 기반을 다진다.

• 소성∙가공
• /
• 제24권2호
• /
• pp.115-120
• /
• 2015

Deep drawing of cylindrical cups is one of the most fundamental and important processes in sheet metal forming. Circular cups are widely used in industrial fields such as automobile and electronic appliances. Some of these cups are formed by a one-stage process, others such as battery cases and beverage cans are made by a multi-stage process. In the current study the multi-stage deep drawing of aluminum sheet metal is examined. The process consists of two deep drawing operations followed by two ironing operations. The press die, which can be used for the four-stage forming process, was manufactured allowing punch and die components to be easily changed for various experiments. The rolling direction of both the sheet and the drawn cups was always positioned toward the horizontal x-direction on the die face to minimize experimental errors during the progressive forming. The dimensional accuracy of the cylindrical cups formed at each stage and the earing defect due to the anisotropy of sheet were investigated. The influence of anisotropy on the thickness distribution was also examined. Both the thickness and the outer diameter of the cups were measured and compared for each set of experimental conditions. It was found that the dimensional accuracy of cups rapidly improves by employing the ironing process and also by increasing the amount of ironing.

• 소성∙가공
• /
• 제14권2호
• /
• pp.147-152
• /
• 2005

The objective of this study is to develop an optimal drawing die for the clad wire drawing process. Cu-clad wire, which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used in the field of the telecommunications, electric-electronic and military technology industries. It is important to obtain uniformly coated rate when producing clad wires. Drawing process of clad wire will be influenced on damage and coated rate of core and sleeve for process variables such as semi-die angle and reduction in area. Therefore, in this study, the finite-element result obtained in this study was analyzed to the effect of the various forming parameters, which included the semi-die angle and reduction in area. The coated rate will be predicted with observation of copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.306-309
• /
• 2007

Recently, magnesium alloys have been widely used in automotive, aerospace and electronic industries with the advantages such as lightweightness, high specific strength and stiffness. However, magnesium alloy has quite low formability at room temperature due to its hexagonal close-packed crystal structure. Warm deep drawing is one of the forming technologies to improve the formability of magnesium alloy sheet and the lubrication condition is an important process parameter in that. In this study, the drawing tests of AZ31 alloy sheet at elevated temperature for various kinds of lubricant were carried out and the effects of lubrication conditions on drawbility were investigated.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.321-327
• /
• 2012

To evaluate whether or not their product is in conformity with its drawing, today's factories manufacturing rubber and/or plastic products use manual process. In manual conformity inspection process, a person decides conformity as comparing drawing to image of product with his eyes. The manual process is tedious and time-consuming in addition that it is impossible to automatically record various informations related to inspection. To solve such problems, this paper proposes automatic drawing conformity inspection system based on computer vision technologies such as image feature matching and bilinear interpolation. The test results show that proposed system is a lot faster when comparing with manual system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 춘계학술대회 논문집
• /
• pp.923-930
• /
• 2006

• 한국전자통신학회논문지
• /
• 제8권12호
• /
• pp.1933-1940
• /
• 2013

최근 컴퓨터 성능 향상 및 정보 기기의 발달로 모바일 증강현실은 급속한 발전을 이루고 있다. 그러나 대부분 콘텐츠가 수동적이거나 대화식이라 하더라도 제한적인 자유도만 주어져 사용자들에게 흥미와 몰입을 부여하기에는 한계점이 존재한다. 본 논문에서는 비전기반 증강현실 시스템과 데이터베이스 관리 시스템 연동을 통한 기존 증강현실 시스템을 보강하여 현실세계와 가상세계의 양방향 통신이 가능하도록 인터랙션 UI를 개선하여 활용성을 높이도록 모바일 증강현실 기반의 2D도면 인터랙션 UI 시스템을 설계한다.

• 한국전자통신학회논문지
• /
• 제11권5호
• /
• pp.505-510
• /
• 2016

최근 기술의 발달로 증강현실에 대한 관심은 급속히 증가하고 있다. 증강현실은 학습자의 시각, 청각, 촉각 등을 활용하여 다양한 만족감을 주고 있으며, 학습자에게 몰입감과 흥미감을 증진시킨다. 본 논문에서는 증강현실을 활용하여 영유아 기초 미술 교육을 위한 드로잉 시스템을 제안한다. 이것은 영유아들에게 그림을 쉽게 접하고 쉽게 그릴 수 있도록 도와줌으로써 몰입감, 성취감, 흥미감을 줌과 동시에 적은 비용으로 효과적인 미술지도학습을 할 수 있다.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.430-437
• /
• 2006

The ultra-drawing process of an ultra high molecular weight polyethylene (UHMWPE) gel film was examined by incorporating linear low-density polyethylene (LLDPE) and $BaTiO_3$ nanoparticles. The effects of LLDPE and the draw ratios on the morphological development and mechanical properties of the nanocomposite membrane systems were investigated. By incorporating $BaTiO_3$ nanoparticles in the UHMWPE/LLDPE blend systems, the ultra-drawing process provided a highly extended, fibril structure of UHMWPE chains to form highly porous, composite membranes with well-dispersed nanoparticles. The ultra-drawing process of UHMWPE/LLDPE dry-gel films desirably dispersed the highly loaded $BaTiO_3$ nanoparticles in the porous membrane, which could be used to form multi-layered structures for electronic applications in various embedded, printed circuit board (PCB) systems.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.301-301
• /
• 2003

In current study, Nanocomposites are reinforced with carbon nanofiber, carbon nanotube and SiC, etc. Since the nano reinforcements have the excellent mechanical, thermal and electrical properties compared with that of existing composites, it has lately attracted considerable attention in the various areas. Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties. Until now, strengthening of the copper alloy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the alloy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conducting material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the cooer matrix composites of high strength and electric conductivity. In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process and align mechanism as well as optimized drawing process parameter are verified via numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of 10∼20$\mu\textrm{m}$ in length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper. it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber Optimal parameter for drawing process was obtained by analytical and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc. The lower drawing angles and lower reduction areas provides the less rupture of co tube is noticed during the drawing process and the better alignment of carbon nanofiber is obtained.