• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.53-53
• /
• 2018

Thermoelectric materials can convert directly waste heat to electricity and vice versa. The improvement of the thermoelectric efficiency strongly depends on the dimensionless figure of merit, $ZT=S^2{\sigma}T/{\kappa}$, where S is the Seebeck coefficient, ${\sigma}$ is the electrical conductivity, T is the absolute temperature, and ${\kappa}$ is the thermal conductivity. The thermal conductivity consists of the electronic contribution (${\kappa}_e$) and phonon contribution (${\kappa}_{ph}$). It is very challenge to increase the power factor, $S^2{\sigma}$ and to reduce the thermal conductivity simultaneously because the power factor and electronic thermal conductivity are coupled. One strategy is to decrease the phonon thermal conductivity. The phonon thermal conductivity can be decreased by controlling the grain size and structural defects such as dislocations and twinning. In order to achieve enhancements in thermoelectric efficiency, microstructures that can form numerous interfaces have been investigated intensively for controlling the transport of charge carriers and heat carrying phonons. In this presentation, we report the heterogeneous microstructure of $Mg_2Si_{0.6}Sn_{0.4}$ thermoelectric materials and investigation of its influence on thermoelectric properties.

• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.711-717
• /
• 2000

Effect of alloying element additions to Ag on thermal conductivity electrical conductivity and mechanical properties of sheath materials for BSCCO tapes has been characterized. The thermal conductivity at low temperature range(10~300K) of Ag alloys were evaluated by both direct and indirect measurement techniques and compared with each other. It was observed that thermal conductivity decreased with increasing the content of alloying elements such as Au, Pd and Mg. Thermal conductivity of pure Ag at 30 K was measured to be 994.0 W/m.K on the other hand the corresponding values of A $g_{0.9995}$/M $g_{0.0005}$, A $g_{0.974}$/A $u_{0.025}$/M $g_{0.001}$, A $g_{0.973}$/Au.0.025//M $g_{0.002}$, and A $g_{0.92}$/P $d_{0.06}$/M $g_{0.02}$ were 342.6, 62.1, 59.2, 28.9 W/m.K respectively indicating 3 to 30 times lower than that of pure Ag. In addition alloying element additions to Ag improved mechanical strength while reduced elongation probably due to the strengthening mechanisms by the presence of additive atoms.s.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3825-3828
• /
• 2013

In this study, the influences of aniline to acid composition were investigated on the electrical conductivity of PANI-PAAMPSA. The ratio of aniline to sulfonic acid groups was optimized for the maximum conductivity of PANI-PAAMPSA. The conductivity is strongly correlated with the electronic structure of PANI-PAAMPSA; the highest conductivity of PANI-PAAMPSA was observed when PANI has the longest conjugation length.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.45-48
• /
• 1997

Enhancing the electrical conductivity of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir-Blodgett(LB) technique has recently been attracted interest as the a method of deposition ultrathin films. We have fabricated N-docosyl-N'-methyl viologen-diTCNQ(DMVT) anion radical LB film and investigated the optical and electrical conductivity. We have measured UV/visible and FT-lR spectrum. In ESR spectrum, we confirmed that a half-amplitude linewidth is clearly dependent on both temperature and incident angle, which indicates conducting species change. The in-plane electrical conductivity of 21 layers is approximately 1.37$\times$10$^{-6}$ (S/cm).

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권4호
• /
• pp.12-15
• /
• 2015

We report on the infrared spectroscopic studies of the normal-state electronic response of rare-earth ternary platinum germanide superconductor $La_2Pt_3Ge_5$. We analyzed the temperature-dependent optical conductivity spectra using the Drude-Lorentz oscillator model. We found that the two Drude responses with distinct scattering rates are required to explain the charge dynamics at 10 K while a single Drude mode could reproduce the far-infrared conductivity at higher temperatures. Our results indicated the two-band character of the electronic structure and highlighted the disparate temperature evolution of the electrodynamics of the two electronic states.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.319-322
• /
• 2004

In this paper, we studied on the thermal conductivity and a mechanical property of the elastic epoxy. According to industrial development, insulation materials have various properties. They are solid, liquid, gas state, there are various type. Epoxy, a kind of insulation material, demand of not only high hardness but also elastic property. When the electric current flows into the conductor and the place where the heat occurs, this heat becomes the cause which shortens the life of the electrical appliance. Therefore, for the heat occurred transmit quickly, thermal conductivity of the insulation material is highly demanded. We studied on the thermal conductivity of elastic epoxy on the high voltage. In this result, thermal conductivity confirmed that it followed thermal property of mixed epoxy and addictives. Hardness is decreased when addictives increased.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.141-145
• /
• 1998

The electrical properties of the mixed conducting yttria(8 mol%) stabilized zirconia(YSZ)-nickel oxide(NiO) composites were examined by a.c. impedance, 4-probe d.c. conductivity between 400 and $1000^{\circ}C$. The oxygen partial pressure dependence of conductivity, and electromotive force measurement of galvanic cell enabled to determine the electronic contribution to the conduction. Up to 6 vol% NiO addition, the conductivity decreased since the electronic NiO acted as an insulator in ionic matrix. However the ionic transport was dominant until NiO content reaches 26 vol%. Mixed conduction was observed between 26 and 68 vol% of NiO. The effect of composition on the electrical property was explained by the microstructure and thus by the distribution of two phases.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.459-466
• /
• 2000

For the applications in the ultra-large-scale-integration (ULSI) metallization processing copper thin films have been prepared by metal organic chemical vapor deposition (MOCVD) technology on TiN/Si substrates. The films have been deposited with varying the experimental conditions of substrate temperatures and copper source vapor pressures. The films were then annealed in a vacuum condition after the deposition and the annealing effect to the electrical conductivity of the films was measured. The grain size and the crystallinity of the films were observed to be increased by the post annealing and the electrical conductivity was also increased. The best electrical property of the copper film was obtained by in-situ annealing treatment at above 40$0^{\circ}C$ for the sample prepared at 18$0^{\circ}C$ of the substrate temperature.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.284-290
• /
• 1996

The electrical properties of bulk galsses in the system Na$_{2}$O-CaO-Al$_{2}$O$_{3}$-B$_{2}$O$_{3}$-SiO$_{2}$ containing 20 to 30mol% sodium which have been subjected to a sodium .tautm. silver ion exchange reaction for 24, 36 and 48 hrs. were analysed by impedance spectroscopy method. Ion exchanged glasses exhibit activation energy values lower than those of the untreated ones. The electrical conductivity increase with sodium content and ion exchanging time. In this experiment the electrical conductivity exhibits a manximum value of 1.78*10$^{-4}$ S/cm at 200.deg. C which contains 30mol% sodium and subjects ion exchange reaction for 48hrs.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.462-466
• /
• 2012

In this paper, heat-releasing composite sheets made of AlN, graphite, Al powder and acryl binder as thermoset were prepared using tape casting method. The crystal structure, morphology, thermal conductivity of heat-releasing composite sheet were measured by using X-ray diffractometer, field emission-scanning electron microscopy and laser flash instrument. It was found thermal conductivity of sheet was decided by solid content, composition including AlN, graphite, Al in heat-releasing composite sheets. As a result, 4.56 W/mK of thermal conductivity could be obtained by using LFA 447.