• The Plant Pathology Journal
• /
• 제39권3호
• /
• pp.265-274
• /
• 2023

Citrus black rot is a serious disease of citrus plants caused by Alternaria citri. The current study aimed to synthesize zinc oxide nanoparticles (ZnO-NPs) by chemically or green method and investigate their antifungal activity against A. citri. The sizes of synthesized as measured by transmission electron microscope of ZnO-NPs were 88 and 65 nm for chemical and green methods, respectively. The studied prepared ZnO-NPs were applied, in vitro and in situ, at different concentrations (500, 1,000, and 2,000 ㎍/ml) in post-harvest treatment on navel orange fruits to verify the possible control effect against A. citri. Results of in vitro assay demonstrated that, at concentration 2,000 ㎍/ml, the green ZnO-NPs was able to inhibit about 61% of the fungal growth followed by 52% of chemical ZnO-NPs. In addition, scanning electron microscopy of A. citri treated in vitro with green ZnO-NPs showed swelling and deformation of conidia. Results showed also that, using a chemically and green ZnO-NPs at 2,000 ㎍/ml in situ in post-harvest treatment of orange, artificially-infected with A. citri, has reduced the disease severity to 6.92% and 9.23%, respectively, compared to 23.84% of positive control (non-treated fruits) after 20 days of storage. The out findings of this study may contribute to the development of a natural, effective, and eco-friendly strategy for eradicating harmful phytopathogenic fungi.

• 미생물학회지
• /
• 제11권1호
• /
• pp.19-30
• /
• 1973

The sweet potatoes infected with witches'-broom disease were collected in the growing fields in Jeon-bug area, Korea. As a possible control plant, Ipomoea batatas L.var. Suwon 147 was selected. The pathogen was identified by various methods ; such as mechanical transmission, antibiotic reactions and electron microscopy. In the results attained the author believed the pathogen of the sweet potato infected with witches' broom to be a mycoplasma-like organism. the results are as follows : 1. Mycoplasma-like bodies were occurred in the phloem region of the sweet potatoes infected with witches'-broom and its particles were sized in the range of about 200-2,500m.mu.. The membrane of the pathogen was observed to be made of an unit. 2. Responsibilities to the antibiotices were sensitive in case of tetracycline and terramycin, and root dipping method showed remarkable than foliage spray. 3. The infection was developed by the grafting transmission but by the insects, Myzus persicae and Cicadella viridis. 4. rosette, witches'-broom, stunt, yellowish, mosaic and necrosis were observed as the symptomps of the disease.

• The Plant Pathology Journal
• /
• 제32권5호
• /
• pp.396-406
• /
• 2016

Continuous supplementation of mineral nutrients and salicylic acid (SA) as foliar application could improve efficacy in controlling basal stem rot (BSR) disease in oil palm seedling. It is revealed from the results that the highest disease severity index (58.3%) was recorded in T8 treatments at 9 months after inoculation. The best disease control was achieved by T7 treatments (calcium/copper/SA [Ca/Cu/SA]) (5.0%) followed by T1 (5.5%), T5 (5.8%), T3 (8.3%), T6 (8.3%), T4 (13.3%), and T2 (15.8%) treatments. Continuous supplementation of Ca/Cu/SA was found to be the most effective in controlling the disease and the high performance liquid chromatography results showed the detection of ergosterol at very low concentration in the treated samples. Moreover, the transmission electron microscopy analysis results clearly indicated that T7 treatment was also enhancing lignification, which was responsible for the thickness of the secondary cell walls and middle lamella compared to untreated samples. It was therefore, concluded that continuous supplementation of minerals nutrients and SA could effectively suppress disease severity by reducing ergosterol activity and also improve the process of lignification in the treated plants. Furthermore, this treatment also managed to delay the onset of BSR symptoms and promote the growth of the seedlings and eventually suppress the BSR disease.

• KSBB Journal
• /
• 제15권5호
• /
• pp.444-451
• /
• 2000

Nonliving methanotrophic biomass was used as biosorbent to remove lead which is one of representative pollutants in metal-bearing wastewater. Solution pH, maximum uptake, biosorbent dose and ionic strength were considered as major factors for adsorption experiments. The optimum pH range for lead removal was increased 3.8∼11.0 for methanotrophic biomass compared to biosorbent-free control, pH of 8.4∼11.2. Removal efficiency of lead by methanotrophic biomass was pH dependent, but less sensitive than that of control. In isotherm experiments with 0.2g biosorbent/L at initial solution pH 5.0, methanotrophic biomass took up lead from aqueous solutions to the extent of 1085 mg/g biomass. Removal amount of lead increased with an increase of biomass dose. According to biomass dose for initial 1000 mg Pb/L at initial pH 5.0, the optimum amount of biomass for maximum lead removal per unit methanotrophic biomass was 0.2 g biomass/L. As a result of scanning electron microscope (SEM) micrographs equipped with energy dispersive spectroscopy (EDS), lead removal by methanotrophic biomass seemed to be through adsorptions on the surface of methanotrophic biomass and exopolymers around the biomass. EDS spectra confirmed that lead adsorption appeared on the biomass and exopolymers that may be effective to lead removal comparing before and after contact with lead. Removal efficiency of lead was slightly affected by ionic strength up to 2.0 M of NaCl and NaNO$_3$respectively.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.107-119
• /
• 1990

The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.

• Advances in concrete construction
• /
• 제14권5호
• /
• pp.355-368
• /
• 2022

This paper investigates the impact of length and volume fractions (VFs) of banana fibres (BFs) on the mechanical and physical properties of concrete. The mechanical properties were compressive strength, splitting tensile, flexural strength, and bond stress, while the physical properties were unit weight and absorption. The slump test was used to determine workability. The concrete's behaviour with BFs was studied using scanning electron microscopy. Experimental work of concrete mixtures with BFs of various lengths (12 mm, 25 mm, and 35 mm) and VFs (0%, 0.5%, 1.0%, and 1.5%) were carried out. The samples did not indicate any agglomeration of fibres or heterogeneity during mixing. The addition of BFs to concrete with VFs of up to 1.50% for all fibre lengths have a significant impact on mechanical properties, also the longer fibres performed better than shorter ones at all volume fractions of BFs. The mix10, which contain BFs with VFs 1.5% and length 35 mm, demonstrated the highest mechanical properties. The compressive strength, splitting tensile, flexural strength, and bond stress of the mix10 were 37.71 MPa, 4.27 Mpa, 6.12 MPa, and 6.75 MPa, an increase of 7.37%, 20.96%, 24.13%, and 11.2% over the reference concrete, which was 35.12 MPa, 3.53 MPa, 4.93 MPa, and 6.07 MP, respectively. The absorption is increased for all lengths by increasing the VFs up to 1.5%. Longer fibres have lower absorption, while shorter fibres have higher absorption. The mix8 had the highest absorption of 4.52%, compared to 3.12% for the control mix. Furthermore, the microstructure of concrete was improved through improved bonding between the fibres and the matrix, which resulted in improved mechanical properties of the composite.

• Applied Microscopy
• /
• 제27권3호
• /
• pp.333-346
• /
• 1997

The ischemia and reperfusion injury of the skeletal muscles is caused by generation of reactive oxygen during ischemia and reperfusion. It is well known that over 4 hours of ischemia injures the skeletal muscles irreversibly. The author has demonstrated the effects of SOD (superoxide dismutase), DMTU (dimethyl thiourea) and ischemic preconditioning on ultrastructural changes of the muscle fibers in the rectus femoris muscles after 4 hours of ischemia and 1 day and 3 days of reperfusion. A total of 72 healthy Sprague-Dawley rats weighing from 200 gm to 250 gm were used as experimental animals. Under urethane(1.15 g/kg, IP, 2 times) anesthesia, lower abdominal incision was done and the left common iliac artery was occluded by using vascular clamp for 4 hours. The left rectus femoris muscles were obtained at 1 and 3 days after the removal of vascular clamp. The SOD (15,000 unit/kg) or DMTU (500 mg/kg) were administered intraperitoneally at 1 hour before induction of ischemia. The ischemic preconditioned group underwent three episodes of 5 minutes occlusion and 5 minutes reperfusion followed by 4 hours of ischemia and 1 day and 3 days of reperfusion. The specimens were sliced into $1mm^3$ and prepared by routine methods for electron microscopic observation. All specimens were stained with uranyl acetate and lead citrate and then observed with Hitachi-600 transmission electron microscope. The results were as follows: 1. SOD or DMTU alone did not affect the ultrastructure of muscle fibers in the rectus femoris muscles. The electron density of mitochondrial matrix was decreased by ischemic preconditioning. 2. Dilated cisternae of sarcoplasmic reticulum, triad, mitochondria and the loss of myofilament in the sarcomere were observed in the 4 hours ischemia and 1 day reperfused rectus femoris muscles. Markedly changed sarcoplasmic reticulum, triad, disordered or loss of myofilament, indistinct A-band and I-band, and irregular electron lucent M -line and Z-line are seen in the 4 hours ischemia and 3 days reperfused rectus femoris muscles. 3. SOD reduced the changes of organelles in the muscle fibers of the 4 hours ischemia and 1 day reperfused rectus femoris muscles of the rats, but SOD did not affect the changes of muscle fibers in the 4 hours ischemia and 3 days reperfused muscles. On the other hand, DMTU markedly attenuated considerably the ultrastructural change of the 4 hours ischemia and 1 day or 3 days reperfused rectus femoris muscles. 4. By the ischemic preconditioning, the change was attenuated remarkably in the 4 hours ischemia and 1 day reperfused rectus femoris muscles. As the ischemic reperfused changes of muscle fibers were regenerated or recovered by ischemic preconditioning, the ultrastructures of them were similar to those of normal control in the 4 hours ischemia and 3 days reperfused rectus formoris muscles. Consequently, it is suggested that DMTU is stronger inhibitor to ischemic reperfused change than SOD. The ischemia and reperfusion-induced muscular damage is remarkably inhibited by ischemic preconditioning.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1678-1687
• /
• 2013

This paper describes a prototype of 3-phase 3.3kV/220V 6kVA modular semiconductor transformer developed in the lab for feasibility study. The developed prototype is composed of three single-phase units coupled in Y-connection. Each single-phase unit with a rating of 1.9kV/127V 2kVA consists of a high-voltage high-frequency resonant AC-DC converter, a low-voltage hybrid-switching DC-DC converter, and a low-voltage hybrid-switching DC-AC converter. Also each single-phase unit has two DSP controllers to control converter operation and to acquire monitoring data. Monitoring system was developed based on LabView by using CAN communication link between the DSP controller and PC. Through various experimental analyses it was verified that the prototype operates with proper performance under normal and sag condition. The system efficiency can be improved by adopting optimal design and replacing the IGBT switch with the SiC MOSFET switch. The developed prototype confirms a possibility to build a commercial high-voltage high-power semiconductor transformer by increasing the number of series-connected converter modules in high-voltage side and improving the performance of switching element.

• Corrosion Science and Technology
• /
• 제15권4호
• /
• pp.182-188
• /
• 2016

Significant piping wall thinning caused by Flow-Accelerated Corrosion (FAC) and Erosion-Corrosion (EC) continues to occur, even after the Mihama Power Station unit 3 secondary pipe rupture in 2004, in which workers were seriously injured or died. Nuclear power plants in many countries have experienced FAC and EC-related cases in steam cycle piping systems. Korea has also experienced piping wall thinning cases including thinning in the downstream straight pipe of a check valve in a feedwater pump line, the downstream elbow of a control valve in a feedwater flow control line, and failure of the straight pipe downstream of an orifice in an auxiliary steam return line. Cause analyses were performed by reviewing thickness data using Ultrasonic Techniques (UT) and, Scanning Electron Microscope (SEM) images for the failed pipe, and numerical simulation results for FAC and EC cases in Korea Nuclear Power Plants. It was concluded that the main cause of wall thinning for the downstream pipe of a check valve is FAC caused by water vortex flow due to the internal flow shape of a check valve, the main cause of wall thinning for the downstream elbow of a control valve is FAC caused by a thickness difference with the upstream pipe, and the main cause of wall thinning for the downstream pipe of an orifice is FAC and EC caused by liquid droplets and vortex flow. In order to investigate more cases, additional analyses were performed with the review of a lot of thickness data for inspected pipes. The results showed that pipe wall thinning was also affected by the operating condition of upstream equipment. Management of FAC and EC based on these cases will focus on the downstream piping of abnormal or unusual operated equipment.

• 미생물과산업
• /
• 제25권2호
• /
• pp.11-18
• /
• 1999

전북지방에 만연되고 있는 고구마 위축병에 관한 병원성 검정에 따른 결과는 다음과 같다. 1. 본고구마 위축병의 병원은 mycoplasma-like organism(또는 PPLO)으로서 그 형태는 타원형이며 크기는 200~2500범위이다. 2.항생물질 효과는 oxytetracycline이 가장 효과적이다. 3.전자현미경 관찰 결과 mycoplasma-like bodies 는 엽맥 관세포 속에 밀집되여 있고, 항생물질에 의해 모구조의 파괴현상이 나타난다. 4. 감염경로는 접목전염만이 되고, 즙액전염, 곤충전염에서는 감염이 되지 않았다.