• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.151-154
• /
• 2020

Radiation noise due to EMI noise generated by the driving circuits of LED lighting devices in a medical imaging room was reduced by decreasing the noise source in the driving circuits and changing the number of corrections in EMI filters. Noise attenuation and filter changes enabled driving circuits that reduced the electromagnetic waves. Such circuits were efficiently designed by using capacitors and inverters in a given space. Therefore, the malfunction of radiation devices can be minimized by using EMI-reduction filter circuits, and reliable operation of medical devices can be expected by blocking electromagnetic waves.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.53-60
• /
• 2009

Remarkable developments in the electric and electronic industry have given people's daily life much more convenience and abundance. However, in electrical communication, or electric and electronic fields, making electrical and electronic devices more functional, more integrated, and faster have put electromagnetic interference(EMI) into more complex forms, and lots of problems such as interruption, malfunction, or interference by noise between electrical communication systems occurs every day. In this research, the electromagnetic compatibility(EMC) filter in the high powered breaker was designed and fabricated as a counter measure. The filter attenuated noise more than 20${\sim}$50 dB in the range of 10 MHz${\sim}$1.5 GHz. And, when the electric fast transient(EFT) of 4 kV in the level 4 of IEC 61000-4-4 was induced, it was soon suppressed to 600 V.

• Journal of Magnetics
• /
• 제10권4호
• /
• pp.163-170
• /
• 2005

The RF integrated noise filters are fabricated by photolithography. The stack for the electromagnetic noise filters consists of the nano-granular ($Co_{41}Fe_{38}AI_{13}O_8$) soft magnetic film / $SiO_2$ / Cu transmission line / seed layer (Cu/Ti) / $SiO_2$-substrate. A good signal-attenuation feature along with a low signal-reflection feature is observed in the present filters. Especially in the noise filter incorporated with a $Co_{41}Fe_{38}AI_{13}O_8$ magnetic film with lateral dimensions of $2000{\mu}m$ wide, 15 mm long and $1{\mu}m$ thick, the maximum magnitude of signal attenuation reaches -55 dB, and the magnitude of signal reflection is below -10 dB in the overall frequency range. And this level of signal attenuation is much larger than that of a noise filter incorporated with a Fe magnetic film.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.379-396
• /
• 2018

Purpose: The purpose of this study was to propose a standard form of noise filter drawing, which is widely used in the field of weapon systems, to define the essential specification which is not standardized at the existing drawings and to employ the reference for manufacturing and qualification test. Methods: To do that, it identifies the improvements to analyze 19 noise filter drawings, studies the principle of noise filtering to find the essential part of the spec. and reviews the MIL-STD-220C and KS IEC 60939, which is the widely used as a formal spec. pertaining to the noise filter. Throughout the study, a standard form is developed to standardize the attenuation characteristics and find eight crucial metrics to specify the noise filter. Results: The results of this study are as follows; The standardized drawings can be used as the qualification test of the item and the manufacturing and engineering documents to make the noise filter, which are also applicable to the reference document to review KDS(Korea Defense Standard) drawings.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.552-559
• /
• 1998

Conducted noise in power line contains both the common mode(CM) and differential mode(DM) noise. These two modes of noise are caused by different noise sources and paths. Therefore, CM/DM noise must be deal with individually in EMI filter. In this paper the technique to separate power line noise is presented, which can be used to measure both the CM and the DM noise from total generated noise. Also, noise-separator is designed and experimental results showed 30 dB above of separation performance in 10 kHz~10 MHz.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.748-753
• /
• 2002

본 논문은 저잡음 특성을 갖는 구조의 부성저항을 이용하여 공진부의 손실을 보상하는 새로운 구조의 공진회로를 제안하고 있다. 또한 여파기 설계시, noise해석을 통하여 최적의 noise 특성을 갖도록 능동 대역통과 여파기의 설계방법을 제시하고 있다. FET에 의해 만들어진 능동 커패시터는 부성저항과 커패시턴스 성분을 가지고 있으며, 부성저항에 의해 공진회로를 구성하는 인덕터 소자의 손실을 보상해 준다. 기존의 능동 여파기는 대개 높은 잡음지수를 가지는데 반하여 제안된 능동 여파기는 능동소자의 잡음특성을 최소화하는 구조로 설계되었다. 잡음지수를 최소화함으로서 RFIC나 MMIC와 같은 집적회로로서 수신단 Front-end설계에 응용할 수 있다. 제작된 2단 능동대역통과 여파기는 1.9 GHz 대역에서 설계되었으며, 측정된 삽입손실은 0 dB, 잡음지수는 2.6 dB, 그리고 OIP3는 8 dBm의 특성을 얻었다

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.963-968
• /
• 2018

본 논문에서는 수동소자를 이용한 소형 공통 모드 필터를 설계 및 제작하였다. 주어진 주파수 응답을 갖는 공통 모드 필터를 설계하기 위해 차동 모드와 공통 모드에서 등가회로를 분석하였다. 제안된 구조는 기존의 ${\lambda}/4$ 공진기로 구현된 필터에 비해 60 %의 크기가 감소하였다. 또한, 제작된 공통 모드 필터는 ${\mid}S_{dd11}{\mid}$, ${\mid}S_{cc21}{\mid}$, ${\mid}S_{cc11}{\mid}$ < -10 dB를 만족하는 27.5 %의 공통 모드 흡수 대역폭에서 최대 1.2 dB의 차동 모드 삽입손실과 최소 78.2 %의 공통 모드 흡수 효율을 갖는다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 임시총회 및 하계학술연구발표회
• /
• pp.176-176
• /
• 2016

• 산업기술연구
• /
• 제34권
• /
• pp.71-78
• /
• 2014

Recently, using the electronic devices was increased with semiconductor developments. So, the EMI(Electromagnetic interference) problem become to important issue for coexistence with each electronic devices. The EMI is caused by switching operation from the power switches as the FET and the transistor in power conversion devices. In this paper, the hybrid EMI filter that composed with active components and passive components was described. The EMI filter is applied to the 160 watts LED driver experimentally verify the performance. The hybrid EMI filter is compared with non-filter, only passive filter and only active filter. The proposed EMI filter attenuated CM noise more than traditional passive filter.

• 한국전자파학회논문지
• /
• 제24권11호
• /
• pp.1074-1080
• /
• 2013

광대역에서 저 위상 잡음 특성을 갖는 주파수 합성기를 YTO를 이용하여 설계하였다. 위상 잡음을 낮추기 위해 분주비를 줄일 수 있는 offset PLL 구조를 사용하였다. 위상 잡음 모델링을 이용하여 PLL의 loop filter, YTO의 Main 드라이버 회로와 FM 드라이버 회로의 loop filter를 최적화하였다. 또한, 1 Hz 이하의 고해상도를 얻기 위하여 DDS를 기준 신호로 사용하였다. 제작된 주파수 합성기의 위상 잡음은 3.2~6.8 GHz에서 -107 dBc/Hz @10 kHz 이하로 측정되었다. 측정 결과와 위상 잡음 모델링을 통해 계산한 값과 비교한 결과, 잘 일치함을 확인함으로써 위상 잡음 모델링이 타당함을 검증하였다.