• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.404-407
• /
• 2018

1장 - 자동차는 엔진에서 만든 동력을 바퀴에 전달하여 지상에서 승객이나 화물을 운반하는 교통 수단이다. 과거에 내연기관에서에서 출발한 자동차는 최근에는 전기자동차와 혼합된 하이브리드와 순수 전기자동차 등이 출시되고 있다. 이로 인한 다양한 부품으로 인한 기술의 발전 및 안정성 강화 등으로 첨단 전기 전자제품의 배치는 증가할 수 밖에 없었고 그로 인해 전자파 환경은 더욱 복잡하고 다양할 수 밖에 없다. CISPR 25에서는 전자기파 노이즈에 대한 시험 방법에 대해서 연구를 진행 중에 있다. 그 중 복사방출 시험에서 요구된 GND 조건에 따른 노이즈 패턴을 분석 하기 위해 다양한 조건을 적용해 비교 검증하고자 한다. 2장 - EMI 챔버의 일반적인 특성 기술, 시험 법 및 측정 장비에 대해 기술한다. 3장 - RE 시험 : 시료가 Center에 있을 때 Ground Strap 변화에 따른 노이즈 분석, 시료가 Center가 아닌 다른 곳에 있을 때 Ground Strap 변화에 따른 노이즈 분석 검증 하고자 한다.

• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.530-536
• /
• 2021

본 논문에서는 전자기기 등에서 전자파 차폐 및 방열소재로 많이 채택되는 동 메쉬 시트와 천연그라파이트 시트를 감압 접착제없이 합지시켜 개발된 차폐 및 방열의 기능을 동시에 가지는 하이브리드시트의 성능 측정결과를 제시하였다. 객관적인 방열 성능을 확인하기 위해 2개의 다른 제품들과 수직 및 수평 열전도도를 각각 측정하여 결과를 비교하였으며, 전자파 차폐 성능은 CISPR 11규격에 따른 복사방출시험을 3m 전자파 무향실에서 진행하여 확인하였다. 수직 열전도도의 경우 제안된 하이브리드 시트가 방열코팅이 된 알루미늄 시트 대비 약 8.63배, 감압 접착제로 인조 그라파이트를 합지시킨 구리 시트에 비해 18.7배 높은 수준이였으며, 수평 열전도도는 인조 그라파이트를 합지시킨 구리 시트에 비해 약 0.64배, 방열 코팅된 알루미늄 시트에 대해서는 약 1.76배로 나타났다. 동일한 열원에서 각 시트들을 적용 후 측정한 결과에서는 제안된 하이브리드 시트가 열방출 기능이 가장 우수하였고 복사방출시험에서는 방사노이즈들이 상당 부분 제거되는 결과를 얻었다.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.7-11
• /
• 2003

CDMA(code division multiple access) has very large peak to average power ratio(PAR) and behave as noise-like wide band digital signals with 1.2288 Mbps transmission rate. For signals with high PAR like CDMA, it is reasonable to prescribe occupied bandwidth(OBW) as average occupied bandwidth. Bandwidth measurements of CDMA signals at remote site are affected by co-channel and adjacent channel interference from adjacent CDMA base station, distortion of signal by fading effect, spurious emission and environment noises. In this study, we have compared OBW measurements in an on-air environment with those measured in a base station using adjacent channel leakage ratio(ACLR) as a reference measurement factor. As results of analysis, the OBW at ACLR$\geq$35 ㏈ shows nearly same statistical characteristics regardless of the measurement locations and environments.

• Journal of electromagnetic engineering and science
• /
• 제5권4호
• /
• pp.197-203
• /
• 2005

This paper evaluates the impacts for interference from UWB system, and determines the tolerable UWB power spectral density(PSD) to the new deploying system, which is called a portable internet service in Korea. It also proposes the interference analysis scheme that can evaluate the characteristics of the performance degradation for portable internet service according to the emission power of UWB systems at the specified frequency bands. The proposed scheme includes a multi-rate and data service environments to deal with interference to portable internet service. It is obtained from simulation results that the transmission PSD of UWB systems should be rigidly restricted by less approximately 10 ${\~}$ 20 dB than FCC provisional limit for coexistence between UWB and portable internet service already allocated at 2.3 GHz frequency bands in Korea.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1583_1584
• /
• 2009

Reverberation chamber have become a common tool in radiated susceptibility and emission testing of electronic equipment. In a reverberation chamber, internal electromagnetic fields are mixed by metallic stirrer. Due to elimination of Polarization characteristic in reverberation chamber, electromagnetic wave reached to EUT all aspect angle. Hence, Field distribution in overmode reverberation chamber can be presented by chi-square distribution. Field uniformity in reverberation chamber have to satisfy standard deviation below 3dB and is influenced by mechanical stirrer. This paper investigates relationship between change of stirrer parameter and field uniformity in reverberation chamber.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.33-37
• /
• 2002

Insulation aging diagnosis system provides early warning regarding electrical equipment defects. Early warning is very important in that it can avoid great losses resulting from unexpected shutdown of the production line. Since relations of insulation aging and partial discharge dynamics are non-linear. it is very difficult to provide early warning in an electrical equipment. In this paper, we propose the design method of insulation aging diagnosis system that use a electromagnetic wave and acoustic signal to diagnose an electrical equipment. Proposed system measures the partial discharge on-line from DAS(Data Acquisition System and acquires 2D patterns from analyzing it. For filtering the noise contained in sensor signals we used ICA algorithms. Using this data, we design of the neuro-fuzzy model that diagnoses an electrical equipment and is investigated in this paper. Validity of the new method is asserted by numerical simulation.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.9-14
• /
• 1997

The pump-pipe-injector system is that most commonly used type of injection equipment for diesel engines. In this study, a new electromagnetic fuel injection system was designed and carried out the experiment of single cylinder direct injection(DI) diesel engine. This system do not need the cam shaft for fuel injection. The effects of the injection timing on the combustion process and emission were investigated. The results are that 1) atomization was improved, 2) combustion pressure was increased and ignition delay became shorter than before, 3) Low smoke level guarantee with more advanced injection timing without abnormal combustion but NOX concentration was increased as the injection time advanced.

• Journal of electromagnetic engineering and science
• /
• 제6권1호
• /
• pp.76-81
• /
• 2006

Ultra wideband(UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geo-location, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional wireless systems sharing the frequency bands such as Broadcasting system. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a orthogonal frequency division Multiplex UWB source and an impulse radio UWB source, to a Broadcasting transmission system. The receive power degradations of broadcasting system are presented. From these experimental results, we show that in all practical cases UWB system can coexist 35 m distance in-band broadcasting network.

• 한국항해학회지
• /
• 제21권4호
• /
• pp.29-38
• /
• 1997

Because of the result of a large use of electronic equipments, the occupation density of microwave frequency band is highly increased, and electromagnetic environment is getting more seriously bad. It is sometimes reported that electronic machines are not normally operated on account of the influence of undesired electromagnetic wave, which often gives fatal blow to even human life and thus becomes serious social problems. OATS(Open Area Test Site) is principally used to measure EMI or examine elelctromagnetic emission. Because of various restrictions we often build semi-anechoic chamber which has the function of OATS to measure EMI or EMS other than OATS. If the difference of the site attenuation between semi-anechoic chamber and OATS is within ${\pm}3dB$, the semi-anechoic chamber is recognized as adequate facility to measure EMI or EMS. Accordingly authors evaluate and analyze site attenuation due to absorbent materials, polarization, mutual coupling effects, etc. The calculated and the measured site attenuation in semi-anechoic chamber are compared. As a result good agreement is obtained.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.241-245
• /
• 2009

High speed train system generates much EMI (electromagnetic interference) by arc between the pantograph and the trolley line during the running time. EMI from the tilted EMU train system which is similar to HEMU-400X system for 400 km/h speed and with the distributed engines was measured following EN50121-2, 'Railway applications. - Electromagnetic compatibility (Emission of the whole railway system to the outside world)'. Measured EMI values exceed the limiting values of EN50121-2 in high frequency band ($30\;MHz{\sim}1,000\;MHz$), but exceeding frequencies were identified that they are used for mobile communications. Measured EMI values did not exceed the limiting values in other low frequency band between 9 kHz and 30 MHz.