• 대한화학회지
• /
• 제31권5호
• /
• pp.444-451
• /
• 1987

에틸렌디아민, 프로필렌디아민 및 디에틸렌트리아민의 구리(II), 카드뮴(II) 및 아연(II)착이온의 桓元에 대하여 압력에 따른 폴라로그래피적 파라미터의 依存性을 조사하였다. 水銀滴下電極, 고인수은전극 및 나선형 백금선을 각각 作業電極, 基準電極 및 補助電極으로 사용하였다. 압력이 1기압에서 1,500기압으로 증가함에 따라 금속착이온의 還元半波電位는 陰電位 쪽으로 이동하였으며, 擴散電流는 상당히 커졌다. 이러한 현상은 전해질용액의 물리적 성질 곧 密度, 粘性度, 誘電常數, 電氣傳導度 등이 압력이 증가함에 따라 커지기 때문이다. 압력을 증가시키면 log plot의 기울기 값이 커지므로 환원반응의 可逆性은 나빠지고 있다. 25$^{\circ}$C ~ 35$^{\circ}$C의 온도범위에서 측정한 확산전류의 溫度係數가 압력을 증가시켜도 2%정도이므로 高壓下에서 폴라로그래피적 환원반응은 擴散支配的이다. 또 실험압력 범위내에서 금속착이온의 확산전류와 농도 사이에는 線形關係가 성립하였다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.431-445
• /
• 1993

The purpose of this study was to observe corrosion characteristics of six dental amalgams and was to analyse corrosion products electrochemically. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by using mechanical amalgamator, the triturated mass was inserted into the cylinderical metal mold ($12{\times}10mm$) and was condensed with 160kg/$cm^2$ by using the hydrolic press. The specimen was removed from the mold and was stored at room temperature for 1 week, and was polished with amalgam polishing kit. The anodic and cathodic polarization curve was obtained by using cyclic voltammetric method with 3-electrode potentiostat in saline for each amalgam and Ag, Sn, Cu plate specimen at $37{\pm}0.5^{\circ}C$. The potential sweep range was -1.7V~0. 4V(vs SCE) in working electrode and scan rate was 50mV/s and the exposed surface area of each specimen to the electrolytic solution was $0.79cm^2$. The results were as follows. 1. In anodic-cathodic polarization curve of amalgam specimens, two anodic current rising areas and two cathodic current peaks were obtained at the low Cu amalgam(CF, CS) specimen and three anodic current rising areas and three cathodic current peaks were obtained at the high Cu amalgam (TY, DS, HV) specimen. 2. As this compared with the anodic and cathodic current peak potentials of Sn, Cu and Ag specimen, the first cathodic current peak I c was caused by the reduction of divalent tin salt, second cathodic current peak IIIc results from the reduction of quadravalent tin salt, and third cathodic current peak me results from the reduction of copper salt. 3. As reverse potential sweeping was done repeatedly, anodic current was decreased slightly in all amalgam specimens.

• 대한화학회지
• /
• 제21권6호
• /
• pp.404-412
• /
• 1977

에탄올-물 혼합용매에서 납전극을 사용하여 니트로벤젠(${\phi}NO_2$)과 그 유도체의 전해 환원반응을 조사하였다. 산성용액에서는 퍼텐셜에 따라 ${\phi}NHOH\;및\;{\phi}NH_2$가 생성되었으며 니트로벤젠(${\phi}NO$)은 중간체가 아닌것으로 보였다. 염기성 용액에서는 ${\phi}NO$가 생성되며 더 낮은 퍼텐셜에서 환원시키면 ${\phi}N=N{\phi}$ 등 짝지어진 화합물이 생성됨을 확인하였다. 사용한 전해질 용액에서 ${\phi}NO\;와\;{\phi}NHOH$ 사이에 화학적인 짝지음 반응(coupling reaction)은 일어나지 않았다. 각각의 반응에 대해 전류-전압관계와 pH 의존도 및 반응물질에대한 반응 차수로부터 반응 메카니즘을 도출하였다. ${\phi}NO$가 생성되는 반응은 치환기가 있을 때도 같은 메카니즘을 따르는 것으로 보인다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.55-62
• /
• 2001

An electrolytic copper rod was drawn up to $90\%$ in area reduction and annealed under various conditions. The EBSD measurement of the drawn wire showed that in the center region the <111> + <100> fiber duplex texture was dominant, while in the middle and surface regions relatively defused textures developed with a little higher density in <11w>//wire axis. The inhomogeneous texture in the deformed wire gave rise to the inhomogeneous microstructure and texture after annealing. The annealing texture could be classified into the recrystallization texture developed during low temperatures and at the early stage at a high temperature and the growth texture developed after a prolonged annealing at the high temperature. The recrystallization temperature could be explained by the strain energy release maximization model and the growth texture was discussed based on the grain boundary mobility anisotropy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.502-506
• /
• 2001

This paper presents a new method for cutting steel with a diamond tool using electrolysis. The electrolysis is adopted in the diamond cutting to prevent the high chemical activity between a diamond tool and an iron-based workpiece. The basic principle of the method is to oxdize a thin substrate of the workpiece by electrolysis ahead of the diamond tool which cuts the oxidized layer. A desired shape can be obtained by repeating this process. The cutting force is reduced because the diamond tool removes only the weakened material by electroysis. The reduction of the cutting force suppresses the excessive wear of the diamond tool. The oxidization penetrates several micrometers in depth along the previously formed shape. The corrosion rates depend on current density and make suggestions on the optimum cutting conditions.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.997-1006
• /
• 2018

This paper proposes a transformerless photovoltaic (PV) power converter system based on the DC/AC boost inverter, which can solve the leakage current and second-order ripple power issues in single-phase grid-connected PV inverters. In the proposed topology, the leakage current can be decreased remarkably since most of the common-mode currents flow through the output capacitor, by-passing parasitic capacitors, and grounding resistors. In addition, the inherent ripple power component in the single-phase grid inverter can be suppressed without adding any extra components. Therefore, bulky electrolytic capacitors can be replaced by small film capacitors. The effectiveness of the proposed topology has been verified by simulation and experimental results for a 1-kW PV PCS.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1204-1209
• /
• 2006

Grouting operate to reinforce expanded clay ground. Cement grouting is one of the most frequently used techniques for underground construction. This work is going to use to add an electrolytic ion to boring water for expanded reduction. To construct underground structures on expanded clay ground is operated pre-grouting that it is the barrier wall previous excavation to prevent an accident. Grouting for early compressive strength development is made a type of suspension. That grouting aims to prevent the swelling magnification in length of time. From now on, grouting is became a type of higher strength suspension to develop early compressive strength.

• 공업화학
• /
• 제8권1호
• /
• pp.39-48
• /
• 1997

카본전극을 이용한 양극산화을 통해 1,1-Bis-(3,4-dimethoxyphenyl)ethane으로부터 $CH_3CN$이나 $CH_2Cl_2/TFA$-혼합용액계에서 Intramolecular cyclizatlon 반응이 일어났다. Intramolecular cyclization에 의한 생성물(9-methyl-2,3,6,7-tetramethoxyfluorene)은 출발물질보다 더 쉽게 산화되고, 그에 따른 산화생성물은 $CH_3CN$계에서 불안정하여 낮을 수율을 나타냈다. TFA가 존재하는 계에서는 Fluorene 유도체의 산화생성물인 radical cation이 안정하여 환원 후에 더 좋은 수율로 합성할 수 있었다.

• 대한화학회지
• /
• 제15권6호
• /
• pp.324-329
• /
• 1971

In order to evaluate the mechanism of electrolytic oxidation of iodate and to determine the optimum conditions for the electrolysis, studies were made using the cells without diaphragm and the lead peroxide anode. Results are summarized as followings: 1) Current density vs. anode potential curve by lead peroxide electrode had the different limiting current densities from platinum electrode and was more positive than platinum electrode. 2) Additions of potassium bichromate in the electrolyte contribute to maintain high current efficiency. 3) In the acid and alkaline regions, the current efficiencies decreased by reduction of iodate and discharge of hydroxyl ion, so maximum current efficiency was shown at pH 7. 4) Higher current density lowered the current efficiency in the region of 60-80% conversion of iodate. 5) Influence of the conversion on current efficiency in the region of 60-80% conversion of iodate.

• 대한화학회지
• /
• 제12권4호
• /
• pp.146-149
• /
• 1968

A new chelate compound, tris(8-bydroxyquinolino)molybdenum(III), [$Mo(C_9H_6ON)_3$], has been prepared by the method of electrolytic reduction of the acidic molybdate solution. Thermal decomposition products of the chelate has been studied by DTA and TGA method. It is concluded that the decomposition product is a yellowish green colored bis(8-hydroxyquinolino)dioxo molybdenum(VI), [$MoO_2(C_9H_6ON)_2$].