• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.464-471
• /
• 2008

The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten salt. Ceramic fibers, especially fibrous commercial glass filters were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. During the infiltration, ions of $Li^+$ and $F^-$ in the molten salts were reacted with the glass fiber and caused to be weaken the fiber strength.

• 대한화학회지
• /
• 제14권3호
• /
• pp.263-269
• /
• 1970

A theory of surface tension developed by using the approximation that the surface of liquids consists of a monomolecular layer has been applied to the molten salts (NaCl, KCl, NaBr, KBr) and the strong electrolyte solutions. By considering that the ionic forces are the long-range forces and with the use of the partition functions developed, the surface tension of molten salts and strong electrolyte solutions has been calculated. The results show good agreement between theory and experiment at various temperatures and over a wide concentration ranges (0.1-4.0m)

• 분석과학
• /
• 제28권5호
• /
• pp.341-346
• /
• 2015

In order to understand the counter anionic effects in a non-aqueous vanadium redox flow battery (VRFB), we synthesized four types of electrolyte salts (1-ethyltriethamine tertafluoroborate, [E-TEDA]⁺[BF₄]⁻, 1-ethyltriethamine hexafluorophosphate, [E-TEDA]⁺[PF₆]⁻, 1-butyltriethylamine tertafluoroborate, [B-TEDA]⁺[BF₄]⁻, and 1-buthyltriethamine hexafluorophosphate [B-TEDA]⁺[PF₆]⁻) by counter anion exchange reaction after the SN₂ reaction. We confirmed the successful synthesis of the electrolyte salts [E-TEDA]⁺[Br]⁻ and [B-TEDA]⁺[Br]⁻ via ¹H-NMR spectroscopy and GC-mass analysis before the counter anion exchange reaction. The electric potential of the vanadium acetylacetonate, V(acac)₃, as an energy storage chemical was shown to be 2.2 V in the acetonitrile solvent with each of the [E-TEDA]⁺[BF₄]⁻, [E-TEDA]⁺[PF₆]⁻, [B-TEDA]⁺[BF₄]⁻, and [B-TEDA]⁺[PF₆]⁻ electrolyte salts. In a non-aqueous VRFB with a commercial Neosepta AFN membrane, the maximum voltages reached 1.0 V and 1.5 V under a fixed current value of 0.1 mA in acetonitrile with the [E-TEDA]⁺[BF₄]⁻ and [E-TEDA]⁺[PF₆]⁻ electrolyte salts, respectively. The maximum voltage was 0.8 V and 1.1 V under a fixed current value of 0.1 mA in acetonitrile with the [B-TEDA]⁺[BF₄]⁻ and [B-TEDA]⁺[PF₆]⁻ electrolyte salts, respectively. From these results, we concluded that in the non-aqueous VRFB more of the [PF₆]⁻ counter anion than the [BF₄]⁻ counter anion was transported onto the commercial Neosepta AFN anion exchange membrane.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.648-652
• /
• 2009

Ceramic fiber separator is the promising material for thermal battery system because it reduces the production cost and offers the potential to a new application compared to a pellet type electrolyte. The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten lithium salt. Ceramic fibers were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. Leakage of molten salt (several lithium salts) leads to short-circuit during the thermal battery operation. In this study, a uniform and fine SiOC mat with fibers ranging from 1 to 3 ${\mu}m$ was obtained by electrospinning of polycarbosilane and pyrolysis. The optimum spinning conditions for obtaining fine diameters of SiOC fiber were controlled by the solution composition and concentration, applied voltage and spinning rate, release rate by porosity. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. The importance of the fiber size and porosity and their control was discussed and the mechanical properties were also discussed.

• 분석과학
• /
• 제10권4호
• /
• pp.231-239
• /
• 1997

역상 이온쌍 고성능 액체크로마토그래피에 의해 3차 아민들과 4차 암모늄염들을 분리하고 정량하였다. 시료들은 간접분광광도법에 의해 검출하였다. 검출 시약과 이온쌍 시약으로는 염화벤질 트리메틸암모늄(BTMACl)과 도데실황산나트륨(DDSANa)을 사용하였다. 전해커패시터의 전해액 중에 포함되어 있는 이들 아민과 암모늄염의 분리 및 정량은 메탄올-물(40:60) 용액에 DDSANa를 0.010M, BTMACl을 0.004M 되게 용해시키고 염화암모늄-암모니아 완충용액(0.05M)으로 pH를 8.5되게 만든 용리액으로 Supelco LC-18이나 ${\mu}$-Bondapak phenyl 컬럼을 통하여 용리시킴으로써 가능하였다. 전해 커패시터들의 전해액을 분석하여 얻은 분석 값의 4차 암모늄염을 첨가하여 만든 커패시터는 임피던스 0.08~0.13의 성능이 우수한 커패시터가 됨도 발견함으로써 분석이 잘 이루어 졌음을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.487-494
• /
• 1995

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li secondary battery. We investigated the effects of lithium salts, plasticizer addition, temperature dependence of conductivity and electrochemical stability window of polyethylene oxide(PEO) electrolytes. PEO electrolyte completed with LiCIO$\_$4/ shows the better conductivity than the others. PEO-LiCIO$\_$4/ electrolyte, when EO/Li$\^$+/ ratio is 8, showed adequate conductivity around room temperature. By adding propylene carbonate and ethylene carbonate to PEO-LiCIO$\_$4/ electrolyte, its conductivity was higher than that of PEO-LiCIO$\_$4/ without those. Also PEO$\_$8/LiCIO$\_$4/ electrolyte remains stable up to 4.5V vs. Li/Li.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.159-162
• /
• 1998

The new type polymer electrolyte composed of polyacrylonitrile(PAN) baed polymer electrolyte contain LiClO$_4$-EC/PC and LiPF$\sub$6/-EC/PC were developed for the weightless and long or life time of lithium polymer battery system with using polyaniline electrode. The gel type electrolytes were prepared by PAN at different lithium salts in the glove box. We prepared for polymer electrolyte with knife casting method. The minimum thickness of PAN gel electrolyte for the slim type is about <400∼500$\mu\textrm{m}$. These gel electrolytes showed good compatibility with lithium electrode. The test cell of Li/polymer electrolyte/Lithium cobalt oxide solid state cell which was prepared by different lithium salt was researched by electrochemical technique. Resistance of polymer electrolyte which consist of LiClO$_4$ is more less than that of LiPF$\sub$6/ and cycle life is more longer than that of LiPF$\sub$6/.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3682-3686
• /
• 2011

The electrochemical properties of lithium-sulfur batteries with binary electrolytes based on DME and DOL, TEGDME and DOL mixed solvent containing $LiClO_4$, LiTFSI, and LiTF salts were investigated. The ionic conductivity of 1M LiTFSI and $LiClO_4$ electrolytes based on TEGDME and DOL increased as the volume ratio of DOL solvent increased, because DOL effectively reduces the viscosity of the above electrolytes medium under the same salts concentration. The first discharge capacity of lithium-sulfur batteries in the DME and DOL-based electrolyte followed this order: LiTFSI (1,000 mAh/g) > LiTF (850 mAh/g) > $LiClO_4$ (750 mAh/g). In case of the electrolyte based on TEGDME and DOL, the first discharge capacity of batteries followed this order: $LiClO_4$ (1,030 mAh/g) > LiTF (770 mAh/g) > LiTFSI (750 mAh/g). The cyclic efficiency of lithium-sulfur batteries at 1M $LiClO_4$ electrolytes is higher than that of batteries at other lithium salts-based electrolytes. Lithium-sulfur battery showed discharge capacity of 550 mAh/g until 20 cycles at all electrolytes based on DME and DOL solvent. By contrast, the discharge capacity of batteries was about 450 mAh/g at 1M LiTFSI and LiTF electrolytes based on TEGDME and DOL solvent after 20 cycles.

• 한국식물병리학회지
• /
• 제10권3호
• /
• pp.163-168
• /
• 1994

Erwinia rhapontici causes soft-rot disease in a number of plants such as rhubarb, onion, hyacinth and garlic. Pectate lyase (Pel) depolymerizes pectin and other polygalacturonates, which is though to play a role in bacterial invasion of plants. Pel activity was not detected in E. rhapontici cultured in a minimal salts medium containing glycerol, polygalacturonate, or citrus pectin as a carbon source. However, when sterilized potato tuber and Chinese cabbage slices were added to minimal salts polygalacturonate (0.5%) medium, E. rhapontici produced pectate lyase enzyme. Also Pel activity was consistently detected from macerated potato tubers, Chinese cabbage leaves, lettuce leaves and celery petioles tissue. Pel in the extract of macerated Chinese cabbage caused by E. rhapontici strain 1, resulted in electrolyte loss, tissue maceration and cell death of potato tuber tissue. These results indicate that E. rhapontici produces pectate lyase only in the presence of non-diffusible plant components, and that this enzyme probably contributes to its pathogenicity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.211-214
• /
• 1998

The composite of polyvinylalcohol(PVA) and lithium salts(LiBF$_4$) is prepared for a solid-state electrolyte of electric double layer capacitor. The composite shows a good ionic conductivity. The solid-state electric double layer capacitor is made of PVA-LiBF$_4$ composite, activated carbon and etc.. As evaluation of characteristics of capacitor, capacitance change which measured by charge-discharge test with 2.2V~0V at 8$0^{\circ}C$ for 800 hours, was about 10%. The gravimetric and volumetric capacitance were 10.0 F/g~30.0 F/g and 16.0F/㎤~F/㎤, respectively.