• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.22-26
• /
• 1996

In this paper, we designed 4-channel electrolyte analyzer that can measure simultaneousely the 4 electrolytes - pH, $pNa^{+}$, $pCa^{2+}$, and $pK^{+}-$ using 2-point calibration and implemented it. Developed electrolyte analyzer consists of singal processing part, actuator part and control unit for sample flow system. To implement reliable instrument, design considerations are emphasized on flow system and sample chamber that requires small sample volume and prevent air contact with sample solution. In addition to the hardware design, we developed system software which controls full measuring process. After system developed, we verified the system performance by the test measurement for pH, $pNa^{+}$, $pCa^{2+}$, and $pK^{+}$ value.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.430-438
• /
• 2023

In this study, we synthesized pH-controlled resorcinol-formaldehyde (RF) gels through the polymerization of two starting materials: resorcinol and formaldehyde. The prepared RF gels were dried using an acetone substitution method, and they were subsequently carbonized under nitrogen atmosphere to obtain carbon xerogels (CX_Y) prepared at different pH (Y). The carbon xerogels were utilized as active materials for coin-type organic supercapacitor electrodes to investigate the influence of pH on the electrochemical properties of the carbon xerogels. The carbon xerogels prepared at lower pH (CX_9.5 and CX_10) exhibited sufficient particle growth, with a three-dimensional network of particles during the RF gel formation, resulting in the development of abundant mesopores. Conversely, the carbon xerogels prepared at higher pH (CX_11 and CX_12) retained densely packed structures of small particles, leading to pore collapse and low specific surface areas. Consequently, CX_9.5 and CX_10 showed high specific surface areas, and provided ample adsorption sites for the formation of electric double layers with electrolyte ions. Moreover, the three-dimensional particle network in CX_9.5 and CX_10 significantly enhanced electrical conductivity. The presence of well-developed mesopores in these materials further facilitated the effective transport of electrolyte ions, contributing to their superior performance as organic supercapacitor electrodes. This study confirmed that pH-controlled carbon xerogels are one of the promising active materials for organic supercapacitor electrodes. Furthermore, we concluded that pH during RF gel formation is a crucial factor determining the electrode performance of the carbon xerogels, highlighting the need for precise pH control to obtain high-performance carbon xerogel electrodes.

• Journal of Microbiology and Biotechnology
• /
• 제11권6호
• /
• pp.1038-1045
• /
• 2001

The electrokinetic technology was applied in bioremediation for the purpose of supplying a Pseudomonas strain capable of degrading diesel to contaminated soil bed, and their biodegradation of diesel was carried out after a desired cell distribution was obtained. Electrokinetic injection of the strain was made possible because the cells acted as negatively charged particles at neutral pH, and thus the cells were transported with a precise directionality through the soil mostly by the mechanism of electrophoresis and in part by electroosmosis. A severe pH change in the soil bed was formed due to the penetration of electrolysis products, which was harmful to the cell viability and cell transport. To achieve a desirable cell transport and distribution, the control of pH in soil bed by a recirculating buffer solution in electrode chambers was essential during the appliation of an electric field. The judicious selections of electrolyte concentration and conductivity were also important for achieving an efficient electrokinetic cell transport since a higher electrolyte concentration favored the maintenance of pH stability in soil bed, but lowered electrophoretic mobility on the other hand. With electrolyte solution of pH 7 phosphate buffer, a 0.05 M concentration showed a better cell transport buffer, a 0.05 M concentration showed a better cell transport than 0.02 M and 0.08 M. The cell under pH 8 were obtained, compared to the cells under pH 7 or pH 9 in a given time period Up to $60\%$ of diesel was degraded in 8 days by the Pseudomonas cell, which were distributed electrokinetically under the conditions of pH 8 ($1,800{\mu}S/cm$, a mixture of phosphate and ammonia buffers) and 40 mA in a soil bed of 15 cm length.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.17-18
• /
• 2007

Solid oxide fuel cells are clean, pollution-free technology for the electrochemical generation of electricity at high efficiency. Specially, the polarization resistance between electrolyte and electrode of SOFC unit cell is of importance, because it is desirable to develop SOFC operating at intermediate temperature below $800^{\circ}C$. The LSCF cathode prepared using modified oxalate method was investigated with different electrolyte. A precursor was prepared with oxalic acid, ethanol and $NH_4OH$ solution. The LSCF precursor was prepared at $80^{\circ}C$, and pH control was 2, 6, 8, 9 and 10. The precursor powder was calcined at $800^{\circ}C$, $1000^{\circ}C$ and $1200^{\circ}C$ for 4hrs. The crystal of LSCF powders show single phase at pH 2, 6, 8 and 9, and the average particle size was about $3{\mu}m$. The LSCF cathode with heat treatment at $1200^{\circ}C$ showed a plot of electric conductivity versus temperature. Unit cell prepared from the LSCF cathode, buffer layer between cathode and electrolyte and the LSGM, YSZ, ScSZ and CeSZ electrolyte. Also interface reaction between LSCF, buffer layer and electrolyte were measured by EPMA and the polarization resistance for unit cell with cycle measure using a Solatron 1260 analyzer.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.125-128
• /
• 2012

We fabricated the electrolyte-insulator-semiconductor (EIS) devices with various high-k sensing membranes to realize a high quality pH sensor. The sensing properties of each high-k dielectric material were compared with those of conventional $SiO_2$ (O) and $SiO_2/Si_3N_4$ (ON) membranes. As a result, the high-k sensing membranes demonstrated better sensitivity and stability than the O and ON membranes. Especially, the $SiO_2/HfO_2$ (OH) stacked layer showed a high sensitivity and the $SiO_2/Al_2O_3$ (OA) stacked layer exhibited an excellent chemical stability. In conclusion, the high-k sensing membranes are expected to have excellent operating characteristics in terms of sensitivity and chemical stability for the biosensor application.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.33-36
• /
• 2012

In this study, the thickness effects of $Al_2O_3$ layer on the sensing properties of $SiO_2/Al_2O_3$ (OA) stacked membrane were investigated using electrolyte-insulator-semiconductor (EIS) structure for high quality pH sensor. The $Al_2O_3$ layers with a respective thickness of 5 nm, 15 nm, 23 nm, 50 nm, and 100 nm were deposited on the 5-nm-thick $SiO_2$ layers. The electrical characteristics and sensing properties of each OA membranes were investigated using metal-insulator-semiconductor (MIS) and EIS devices, respectively. As a result, the OA stacked membrane with 23-nm-thick $Al_2O_3$ layer shows the excellent characteristics as a sensing membrane of EIS sensor, which can enhance the signal to noise ratio.

• Nuclear Engineering and Technology
• /
• 제18권3호
• /
• pp.194-199
• /
• 1986

수용액중에 극미량의 Am의 거동이 pH변화에 따라 변화하는 것을 원심분리법으로 조사하였다. 이 연구에서 평형시간을 2~3주 연장, 방사성 코로이드 형성에 있어서의 시간효과를 조사하였다. 또한 실리카겔 및 Fe$^{3+}$ 등 외부 물질을 첨가하여 그 효과를 조사하였으며, 또한 진한 전해질물질의 효과도 아울러 조사하였다. 그 결과, pH 6에서 Am은 불순입자, 또는 용기벽과 이온 흡착과정으로 급속히 흡착이 일어났다. 외부물질의 첨가는 Am의 흡착을 촉진하였으며, 진한 전해질물질의 첨가로 흡착이 방해되었다. pH 7에서 Am은 pH 6조건과는 전혀 다른 거동을 나타내었다. 일부 Am은 용기 기벽에서 빠른 흡착이 일어났으며, 1~2일 후에 일부는 탈착되었다.

• 한국환경보건학회지
• /
• 제35권3호
• /
• pp.201-208
• /
• 2009

Oxidation of phenol in aqueous media by electro-Fenton process using Ru-Sn-Sb/graphite electrode has been studied. Hydrogen peroxide was electrically generated by reaction of dissolved oxygen in acidic solutions containing supporting electrolyte and $Fe^{2+}$ was added in aqueous media. Phenol degradation experiments were performed in the presence of electrolyte media at pH 3. Effect of operating parameters such as current, electrolyte type (NaCl, KCl and $Na_2SO_4$) and concentration, $Fe^{2+}$ concentration, air flow rate and phenol concentration were investigated to find the best experimental conditions for achieving overall phenol removal. Results showed that current of 2 A, NaCl electrolyte concentration of 2g/l, 0.5M concentration of $Fe^{2+}$, air flow rate of 1l/min were the best conditions for mineralization of the phenol by electro-Fenton.

• 전자공학회논문지
• /
• 제53권2호
• /
• pp.117-122
• /
• 2016

최근 환경, 의료분야에서 실시가 검출 및 인체 삽입형 pH 센서에 대한 요구가 증가하고 있다. 이에 본 연구에서는 생체적 합성이 우수한 그래핀을 이용하여 실시간 pH 검출이 가능한 센서를 개발하였다. Polyethylene terephthalate(PET) 기판에 전사된 그래핀 표면에 이온 용액속에서 동작하는 전계효과 트랜지스터(solution-gated field-effect transistors; SGFETs)를 제작하였으며 이를 이용하여 이온 용액의 pH를 검출하였다. 제작한 트랜지스터의 게이트 채널 길이는 $500{\mu}m$, 게이트 채널 폭은 8mm이다. 이온 용액속에서 트랜지스터 동작특성 및 pH 감도를 평가하기 위하여 드레인-소스 전압($V_{DS}$)에 따른 드레인-소스 전류($I_{DS}$) 및 게이트-소스 전압($V_{GS}$)에 따른 드레인-소스 전류($I_{DS}$)를 측정하였다. PET기판에 전사된 그래핀 위에 제작한 그래핀 SGFETs의 전류-전압 특성은 이온 용액내에서 매우 안정적으로 동작하였으며 그래핀 SGFETs의 Dirac point는 이온 용액의 pH값이 증가함에 따라 양의 방향으로 19.32 mV/pH씩 증가하였다.

• 대한환경공학회지
• /
• 제28권7호
• /
• pp.764-769
• /
• 2006

미생물을 접종하지 않은 동전기 공정에서 전기분해에 의한 양극조에서 산소의 발생은 전류밀도에 비례하였으며 전해질을 순환시킴에 따라 생물반응기내 전해질과 함께 용존산소농도가 증가하였다. 전류의 공급과 함께 미생물 농도는 급격히 증가하였으며 이때 미생물의 산소소비량이 증가되어 용존산소농도가 감소되었다. Pentadecane-오염토양에 대한 동전기 생물학적 복원의 결과에서 높은 전류밀도 1.88 $mA/cm^2$에서 비록 산소의 발생량은 많았지만 오히려 증가된 유기산이 전해질 pH와 미생물 활성을 감소시키므로 미생물 농도와 제거효율이 0.63 $mA/cm^2$보다 낮게 나타났다. 0.63 $mA/cm^2$에서 적절한 산소의 공급과 동시에 전해액 pH의 감소가 작았으므로 최적의 미생물 농도와 제거효율을 얻을 수 있었다.