• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.948-951
• /
• 2003

The electroluminescence (EL) properties were studied in organic light-emitting diodes with a red fluorescent dye, 4- (dicyanomethylene)- 2- tert-butyl-6 (1,1,7,7-tetramethyljulolidyl-9-enyl)- 4H- pyran (DCJTB) doped into tris-(8-hydroxyquinoline)aluminum ($Alq_{3}$), rubrene and the mixed matrix of $Alq_3$ and rubrene. The device with DCJTB doped into the $Alq_{3}$:rubrene mixed host shows an efficient red emission from DCJTB with a negligible EL emission from $Alq_{3}$ and a lower EL onset voltage compared to the device with DCJTB doped into the $Alq_{3}$ only host. The quantum efficiency is almost temperature-independent for the device with the $Alq_3:rubrene$ mixed host. The results indicate that recombination of injected electrons and holes occurs on rubrene and subsequent energy transfer to DCJTB dominates in the device with the $Alq_{3}$:rubrene mixed host.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.506-509
• /
• 2002

In this paper. we give pressure stimulation into organic ultra thin films and detected the induced displacement current proper ties, and then manufacture a device under the accumulation condition. In processing of a device manufacture. And electroluminescence(EL) from conjugated polymers has recently received great attention because polymer light-emitting diodes(LEDs) clealy have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the elextrodes. followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material. In this paper, we fabricated the single layer EL device using $Alq_3$ as emitting material. According as turn on voltage could know about 5.5V in voltage-current characteristics and voltage rise, current could see that increase as non-linear, Current and ruminance can see that express similar relativity in voltage, and could know that ruminance is expressing current relativity.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1219-1221
• /
• 1997

Poly(1,4-phenylene(1-methoxyenthylene)), organic water soluble PPV precursor was synthesized for polymer electroluminescence(EL) device. To control the molecular array, deposition method of emitter was Langmuir-Blodgett(LB). PPV precursor layer was treated thermally to conversion of PPV. Optical, electrical and EL properties of PPV LB thin film was estimated. Homogeneous light emission of greenish-yellow in PPV LB thin film can be easily confirmed under normal lighting even at low driving voltage. Polymer EL device using PPV LB thin film as emitter materials had a possibility to apply to next generation display device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.625-629
• /
• 2016

Electrical and optical properties of the AC voltage driven organic light-emitting diodes were investigated by measuring the electroluminescence of the device. Device structure of ITO(170 nm)/TPD(40 nm)/Alq3(60 nm)/LiF(0.5 nm)/Al(100 nm) was manufactured using a thermal evaporation. Sinusoidal and square-type AC voltage was applied to the device using a function generator. Amplitude of the applied voltage was 9.0 V, and a frequency was varied from 50 Hz to 50 kHz. Electroluminescence out of the device was measured in a Si photodetector simultaneously with the applied voltage together. An intensity and a delayed residual luminescence from the device were depended on the frequency of the sinusoidal voltage. It is thought to be due to a contribution of the capacitive nature in the equivalent circuit of the device. An electron mobility was estimated using a time constant obtained from the luminescence of the device driven by the square-type AC voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.972-975
• /
• 2002

Electroluminescence(EL) devices based on organic thin layers have attracted lot of interests because of their application as display. One of the problems is red material. It offered a short life and poor emission efficiency to boot. In this study, this problem can be solved by using a multi-layer device structure. Organic electroluminescent devices which are composed of organic thin multi-layer films are fabricated. The basic structure is ITO / Emitting layer / LiP / Al EL device in which Hole transport/Electron blocking PVK layer was blending. We demonstrate the enhancement of eletroluminescence (EL) from blends of poly(3-hexylthiophene) in poly(N-vinylcarvazole). The emitting layer is consisted of a host material(PVK) and a guest emitting material(P3HT). It was showed higher EL intensity and their electro-optical properties were investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1619-1622
• /
• 2005

The ultra thin hole injection layer (HIL) was deposited on an indium-tin-oxide (ITO) anode by using an ion beam assisted d eposition (IBAD) for the fabrication of an polymeric electroluminescence device for the first time. The device with the HIL deposited by IBAD has higher external quantum efficiency than the device with the HIL by conventional thermal evaporation. It is found that the deposited HIL by IBAD has high surface coverage on ITO anode in a few nm regions because the HIL prepared has high adatom mobility by ion beam energy.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1377-1378
• /
• 1998

Blue light emitting electroluminescence(EL) diodes were fabricated utilizing Coronene and some organic materials. Coronene showed photoluminescence(PL) peak at 450nm in solution with high quantum efficiency. Multi layer system was applied to fabricate EL diode utilizing Coronene. The device showed didode-like applied voltage-current relationship. And blue light emitting was observed. The decay time of device was in a scale of some seconds. The trun-on voltage of device was about 9 V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.943-949
• /
• 2000

In this paper, the single and double heterostructure organic light-emitting devices(OLEDs) were fabricated. The single heterostructure OLED(TYPE 1) is consisted of TPD as a HTL(hole transfer layer) and Alq$_3$as an EML(emitting layer). The double heterostructure OLED(TYPE 2) is consisted of TPD as a HTL, Alq$_3$as an EML and PBD as an ETL(electron transfer layer). The another double heterostructure OLED(TYPE 3) is consisted of TPD as a HTL, PBD as an EML and Alq$_3$as an ETL. We obtained a strong green emission device with maximum EL emission wavelength 500nm in TYPE 3. When the applied voltage was 12V, the emission luminescence was 120.9cd/㎡. The chromaticity index of TYPE 3 was x=0.29, y=0.50. In the characteristic plot of current-voltage, TYPE 3 device was turned on at 6.9V. This voltage was a fairly low turn-on voltage. TYPE 1 and 2 device were turned on at 10V and 8.9V respectively. These types showed no good properties over that of TYPE 3.

• Journal of Information Display
• /
• v.9 no.3
• /
• pp.16-22
• /
• 2008

A novel class of conjugated dendritic molecules bearing N-hexyl-substituted carbazoles as peripheral groups and various conjugative aromatic cores was synthesized through Heck coupling and the Horner-Emmons reaction. A multilayered structure of ITO/PEDOT:PSS (30 nm)/emitting material (50 nm)/BCP (10 nm)/$Alq_3$ (10 nm)/LiF (1 nm)/Al (100 nm) was employed to evaluate the synthesized dendritic materials. The electroluminescence spectrum of the multilayered device made of 3Cz predominantly exhibited blue emissions. Similar emissions were observed in the PL spectra of it's the device's thin film. The multilayered devices made of 3Cz, 3BCz, and 4BCz showed luminance values of 6,250 cd $m^{-2}$ at 24 V, 3,000 cd $m^{-2}$ at 25 V, and 1,970 cd $m^{-2}$ at 36 V, respectively. The smallest molecule, 3Cz, which bore three carbazole peripheral groups, exhibited a blue-like emission with CIE 1931 chromaticity coordinates of x = 0.17 and y = 0.21.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.181-187
• /
• 2005

Alkoxy-substituted poly(spirobifluorene)s and their copolymers with a triphenylamine derivative have been synthesized by Ni(0)-mediated polymerization. The polymers were well soluble in common organic solvents. Pure blue-light emissions without the long wavelength emission of poly(fluorene)s have been observed in the fluorescence spectra of polymer thin films. The light emitting diodes with a device configuration of ITO/PEDT:PSS(30 nm)/polymer(60 nm)/LiF(1 nm)/Al(100 nm) have been fabricated. The electroluminescence spectra showed the blue emissions without the long wavelength emission as observed in the fluorescence spectra. The relatively poor electroluminescence quantum yield of the homopolymer (0.017% @ 20 $mA/cm^{2}$) with color coordinates of (0.16, 0.07) has been improved by the introduction of triphenylamine moiety, and the copolymer with derivative exhibited an electroluminescence quantum yield of 0.15 % at 20 $mA/cm^{2}$ with color coordinates of (0.16, 0.08). Moreover, the introduction of polar side chains to the spirobifluorene moiety enhanced the device performance and led to the quantum yields of 0.6 to 0.7 % at 20 $mA/cm^{2}$, although there was some expense of color purities.