• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• 센서학회지
• /
• 제13권4호
• /
• pp.292-297
• /
• 2004

Carbon nanotubes (CNT) were synthesized by arc-discharge method. To fabricate CNT sensor, CNT powder was dispersed in ${\alpha}$-Terpinol($C_{10}H_{17}OH$) solution. The CNT tilms were fabricated by screen printing method on the interdigitated Pt/Pd alloy electrode. The microstructure of CNT film was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In order to investigate the gas sensing characteristics of the film, the CNT film was experimented to measure NO response and recovery time. The CNT sensor with a heater was compared to that without a heater. And this sensor shows better reproductibility and faster recovery time than another CNT sensors. We suggest the possibility to utilize a CNT as new sensing materials for environmental monitoring.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.359-362
• /
• 2003

Electrophoretic deposition (EPD) of alcohol YBCO suspensions on the Ag wire electrode is studied. Poly(ethylene glycol) was coordinated to a structure formed by the EPD process with YBCO particles. The suspension is characterized in terms of zeta potential and conductivity. The d.c electric fields of 200-300 V/cm are applied for 1-10 min. The optimal condition for the EPD allows modifying the properties and microstructure of the deposited films. Superconducting coatings with nanometer-sized pores and a preferred orientation along the c-axis were prepared from the result with chemically modified precursor solution. In contrast, YBCO coatings of submicrometer-sized pores and randomly orientated grains were prepared from the solution without PEG.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권10호
• /
• pp.504-508
• /
• 2001

The$(Sr_{1-x}Ca_x)TiO_3$(SCT) thin films are deposited on Pt-coated electrode $(Pt-TiN /SiO_2Si)$ using RF sputtering method at various deposition temperature. The crystallinity of thin films was increased with increased of deposition temperature n the temperature range of 200~500 $[^{\circ}C]$. The capacitance changes almost linearly in temperature ranges of -80~+90$[^{\circ}C]$. All SCT thin films used in the study the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200[kHz]. V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2011

Electrical sintering of the front electrode for crystalline silicon solar cells was performed applying a constant DC current to the printed lines. Conducting lines were printed on glass substrate by a drop-on-demand (DOD) inkjet printer and silver nanoparticle ink. Specific resistance and microstructure of sintered silver lines and were measured with varying DC current. To find the relation between temperature increase with changing applied current and specific resistance, temperature elevation was also calculated. Sintering process finished within a few milliseconds. Increasing applied DC current, specific resistance decreased and grain size increased after sintering. Achieved minimum specific resistance is approximately 1.7 times higher than specific resistance of the bulk silver.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.544-547
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_{2}O_{9}$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various deposition temperature. The optimum conditions of RF power and Ar/$O_2$ ratio were 60[W] and 70/30, respectively. Deposition rate of SBN thin films was about 4.17[nm/min]. The crystallinity of SBN thin films were increased with increase of deposition temperature in the temperature range of $100{\sim}400[^{\circ}C]$, the surface rougness showed about 4.33[nm]. The capacitance of SBN thin films were increased with the increase of deposition temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.997-1000
• /
• 2001

Pb(Zr$\sub$0.52/Ti$\sub$0.48/)O$_3$(PZT) thin films have been prepared by rf-magnetron sputtering methods and investigated the structural and electrical properties. In order to investigate the effects of sputtering conditions, input power was controlled during deposition. Crystallization process and microstructure of PZT thin films were largely affected by input power. Highly crystallized PZT films with the perovskite structure were successfully obtained on Pt/Ti bottom electrode. The dielectric constants and polarization of PZT thin films were increased with increasing input power, and the coercive electric field was decreased with increasing input power . The dielectric constant of PZT thin films with input power 150 W was 966 at 1 kHz. we, authors, proposed that preferred orientation of PZT thin films were controlled by input power in sputtering methods.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.802-807
• /
• 2001

The (S $r_{0.85}$C $a_{0.15}$)Ti $O_{3}$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/ $SiO_2$/Si) using RF sputtering method. The composition of SCT thin films deposited on Si substrate at woom temperature is close to stoichiometry(1.102 in A/B ratio). The maximum dielectric constant of SCT thin films is obtained by annealing at 600[$^{\circ}C$]. The capacitance characteristics had a stable value within $\pm$4[%]. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz]. SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequencey.cey.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.55-59
• /
• 2005

The ($Sr_{1-x}Ca_{x})Ti_{3}$(SCT) thin film are deposited on Pt-coated electrode (Pt/TiN/$SiO_{2}$/Si) using RF sputtering method. The maximum dielectric constant of SCT thin film is obtained by annealing at 600[$^{\circ}C$]. The temperature properties of the dielectric loss have a value within 0.02 in temperature lunges of -80 $\∼$ +90[$^{\circ}C$]). The capacitance characteristics had a stable value within ${\pm}4\%$. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz).

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.124-129
• /
• 2001

SOFC(Solid Oxide Fuel Cell)의 음극으로 쓰이고 있는 Ni-YSZ 복합체의 미세구조를 Ni의 함량에 따라 정량적으로 분석하고 이로부터 미세구조적인 특성과 전극특성간의 상관관계를 규명하였다. 미세구조적인 특성의 정량화를 위해 quantitative microscopy 이론을 응용해 화상분석 하였고 그로부터 복합체내 각 상들의 크기 및 분포, 각 상간의 연결도 및 계면 면적 등의 정보를 얻어내었다. 미세구조 분석결과 복합체 전극의 특성은 입자성장 등에 의한 미세구조 변화, 특히 Ni 상의 입자성장 정도에 크게 의존하였으며 이렇게 정량화된 미세구조적 인자들은 복합체가 나타내는 복잡한 전기적 물성들을 예측하는데 아주 유용하게 활용되었다.