• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 2001

Recently, the study on the vibration analysis of machinery is greatly important and ESPI is widely used because of its many attractive features. Firstly, ESPI can be used to measure the vibration mode shape and the phase in real-time. Secondly, the conventional measuring methode, such as accelerometers, take much time to measure the whole field of object, but ESPI needs shorter time than other methods. Because ESPI is a field-inspection method. Thirdly, ESPI is a non-contact measuring system. ESPI does not have influence on the specimen. Beyond these features, there are several advantages in ESPI system. In this paper, the Stroboscopic ESPI system is described for measurement of a vibration mode shape. The Stroboscopic ESPI system had been used to visualize the vibration mode shape, in which EO(Electro-Optic)modulator was used to chop CW(Continuous Wavefront)laser. But it was not easy to control EO modulator and quantified the vibration amplitude and the phase of circular metal plate. At first, we found resonant frequency of the specimen by using time-averaged ESPI method. Nextly, the amplitudes of specimen were quantified by using Stroboscopic ESPI and we compare the results which were obtained in several chopping ratio.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.499-507
• /
• 2004

광섬유 ROTDR (Rayleigh optical time domain reflectometry) 센서와 보디 긴 광섬유를 감지광섬유로 사용할 수 있는 광섬유 BOTDA (Brillouin optical time domain analysis) 센서를 구성하고, 이들 각각을 이용하여 중요보안 대상체인 사회기반시설물에 침투하는 침입자를 탐지할 수 있는 기포 연구를 수행하였다 ROTDR 센서의 감지부로는 넓은 면적을 감지할 수 있는 매설형 광섬유 센서 탐지판을 제작하고, 인가된 침입물체의 위치와 무게에 따른 신호특성을 고찰하였다. ROTDR 센서는 펄스 폭이 30ns이고, 광섬유의 길이는 10km 이상이다. 위치탐지오차는 약 2m 이내였으며, 무게에 따른 탐지능력은 20kgf, 40kgf, 60kgf, 80 kgf의 네 단계를 구분할 수 있음을 알 수 있었다. 넓은 지역에 걸친 침입자의 침투를 감시하기 위하며 수십 km의 광섬유 길이 전제를 감지부로 사용할 수 있는 광섬유 BOTDA 센서를 개발하였다. BOTDA 센서는 한 개의 레이저 다이오드와 두 개의 광전 변조기(electro-optic modulator)를 사용하여 간단하게 구성하였다. 침입자에 의한 광섬유의 변형률 벽화를 탐지하는 실험을 수행하기 위하여 광학테이블 위에 광섬유에 변형률을 인가하기 위한 실험 장치를 설치하여 실험을 수행하였다. 이 실험으로부터 시간간격 1.5 초동안 광섬유 약 4.81km의 길이를 거리분해능 3m로 침입자를 탐지할 수 있음을 확인하였다.

• 한국광학회지
• /
• 제14권1호
• /
• pp.38-43
• /
• 2003

$LiNbO_3$의 스트레인광학효과와 ~l.4$\mu\textrm{m}$ 두께 이상으로 증착된 Mo(molybdenum)/Pt(platinum) 금속 박막으로부터 발생되는 압축스트레인을 이용하여 채널 광도파로 제작 공정을 개발하였다. 제작된 광도파로는 단일모드로 관찰되었으며, 삽입 손실이 TE, TM 입사 편광모드 각각에 대해서 6.2, 7.7 dB/cm로 측정되었다. 전극 길이와 간격이 11 mm, 21 $\mu\textrm{m}$인 광변조기를 스트레인광학형 광도파로 구조를 이용하여 제작하였으며, $V_{\pi}$= 16.1 V와 100% 변조 깊이가 1.55$\mu\textrm{m}$ 파장 영역에서 측정되었다. 또한 1$\times$2광 파워 분리기를 제작한 결과 0.63$\mu\textrm{m}$ 파장 영역에서 on/off 특성이 $\pm$25V에서 관찰되었다.

• ETRI Journal
• /
• 제34권3호
• /
• pp.361-368
• /
• 2012

A complete high-frequency small-signal circuit model of a 40 Gb/s butterfly electroabsorption modulator integrated laser module is presented for the first time to analyze and optimize its electro-optic (E/O) response and reflection characteristics. An agreement between measured and simulated results demonstrates the accuracy and validity of the procedures. By optimizing the bonding wire length and the impedance of the coplanar waveguide transmission lines, the E/O response increases approximately 5% to 15% from 20 GHz to 33 GHz, while the signal injection efficiency increases from approximately 15% to 25% over 18 GHz to 35 GHz.

• ETRI Journal
• /
• 제18권1호
• /
• pp.1-14
• /
• 1996

We have experimentally observed and theoretically analyzed the gain dependent optimum repetition rates of a hybrid-type active and passive mode locked laser pulses in an erbium-doped fiber laser of the figure-of-eight geometry by utilizing a nonlinear amplifier loop mirror (NALM) as a saturable absorber and a directional-coupler type electro-optic modulator as an active mode locker. Transform-limited mode-locked pulses of about 10 ps width were obtained at repetition rates which correspond to harmonics of the cavity fundamental frequency and depend on the optical amplifier gain in the NALM.

• 한국광학회지
• /
• 제7권4호
• /
• pp.386-389
• /
• 1996

We report on comparative results obtained from harmonically mode-locked laser operations of ring-type and figure-of-eight(F8) type erbium-doped fiber lasers by using a directional-coupler type electro-optic modulator as an active mode-locker. The mode-locked and transform-limited pulses of 10.6 ps width were obtained at harmonics of the fundamental cavity frequency with the F8 type laser while mode-locked laser pulses greater than 15 ps were achieved with the ring type laser.

• 센서학회지
• /
• 제20권1호
• /
• pp.8-13
• /
• 2011

We present measurements of the Brillouin frequency shift in an optical fiber using a 1550 nm distributed feedback laser diode(DFB-LD) as a light source. By modulating the probe light with an electro-optic modulator, we confirm the stimulated Brillouin gain spectrum(BGS) and spontaneous BGS using the coherent detection method. We also confirm the applicability of the technique to distributed temperature sensors that measure the change in Brillouin frequency shift due to temperature variations.

• Journal of the Optical Society of Korea
• /
• 제2권1호
• /
• pp.9-12
• /
• 1998

Rational harmonic mode-locking of an Er-doped fiber ring laser has been successfully demonstrated up to the 16-th harmonic, of the RF frequency applied to the electro-optic modulator. This is the highest harmonic reported so far to our knowledge.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.438-440
• /
• 2005

광위상변조기를 이용하여 OCT용 초고속 광지연단을 설계하고 수치해석을 수행하였다. 수치해석은 electro-optic 위상 변조기에 1310nm, 10ps의 펄스폭을 갖는 레이저 광원을 적용하여 수행하였다. 수치해석결과로 500MHz의 변조 주파수일때 19ps의 시간 지연을 얻었으며, 이는 기존의 기계적 검출방식(수십kHz)의 OCT장치에 비해 1000배이상 빠른 검출이 가능할 것으로 예상된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.111-118
• /
• 2002

A new lithium niobate optical modulator with a polymer buffer layer on Ni in-diffused optical waveguide is proposed for the fist time, successfully fabricated and examined at a wavelength of 1.3 mm. By determining the diffusion parameters of Ni in-diffused waveguide to achieve more desirable mode size which is well matched to the mode in the fiber, the detailed results on the achievement of high optical throughput are reported. In addition, the usefulness of polymer buffer layer which can be applicable to a buffer layer in Ni in-diffused waveguide devices is demonstrated. Several sets of channel waveguides fabricated on Z-cut lithium niobate by Ni in-diffusion were obtained and on which coplanar traveling-wave type electrodes with a polymer-employed buffer layer were developed by a conventional fabrication method for characterizing of electro-optical performances of the proposed device. The experimental results show that the measured half-wave voltage is of ~10 V and the total measured fiber-to-fiber insertion loss is of ~6.4 dB for a 40 mm long at a wavelength of =1.3 mm, respectively. From the experimental results, it is confirmed that the polymer-employed buffer layer in LiNbO3 optical modulator can be a substitute material instead of silicon oxide layer which is usually processed at a high temperature of over $300^{\circ}C$. Moreover, the fabrication tolerances by using polymer materials in LiNbO3 optical modulators are much less strict in comparison to the case of dielectric buffer layer.