• 제목/요약/키워드: Electro-Magnetic Interference

검색결과 93건 처리시간 0.028초

실시간 낙뢰화면 표시프로그램 개발 (Development of Heal Time Lightning Information System)

  • 곽주식;우정욱;심응보;김기운;김용수;이성진;이건웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 A
    • /
    • pp.175-177
    • /
    • 2003
  • Because the overhead transmission lines arc exposed to the outdoor weather, the faults of the transmission lines are due to natural conditions, and among these faults, the outage rate by lightning is about 50%. The lightning causes the damage of power system equipments, the shut down of electricity and the electro-magnetic interference. Therefore, the pertinent insulation design is important, not only to decrease the damage of the facility itself but also to increase the reliability of electric power system. For these reasons, we have to obtain and accumulate the lightning current parameters for the basic lightning research. This paper describes the development of real time analysis system about lightning information.

  • PDF

LPATS에 의한 7년간의 한반도 뇌격특성분석 (Analysis of the lightning characteristics by LPATS Data during 7 year)

  • 우정욱;심응보;곽주식;권동진;문재덕;한상옥
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 A
    • /
    • pp.509-511
    • /
    • 2003
  • Because the overhead transmission lines are exposed to the outdoor weather, the faults of the transmission lines are due to natural conditions, and among these faults, the outage rate by lightning is about 50%. The lightning causes the damage of power system equipments, the shut down of electricity and the electro-magnetic interference. Therefore, the pertinent insulation design is important, not only to decrease the damage of the facility itself but also to increase the reliability of electric power system. For these reasons, we have to obtain and accumulate the lightning current parameters for the basic lightning research. This paper describes the statistical distribution of lightning current parameters and the IKL map.

  • PDF

비엔나 정류기의 공통모드 전압 저감이 가능한 캐리어 비교 PWM 기법 (Carrier Comparison PWM Method of Vienna Rectifier for Reduction of Common Mode Voltage)

  • 이동현;최원일;홍창표;김학원;조관열
    • 전력전자학회논문지
    • /
    • 제21권2호
    • /
    • pp.126-133
    • /
    • 2016
  • This paper proposes a new PWM method to reduce the common mode voltage change in three-level Vienna rectifier. This new proposed PWM method uses medium voltage vector for the three-level Vienna rectifier to determine the sum of three-phase voltage zero, and the common mode voltage variation is decreased. Using the carrier comparison method, the switching function generator for three-level Vienna rectifier has been proposed. The effects of the proposed PWM method have been verified through simulation using the PSIM.

임펄스 전자기파 발생기 (Impulse Electromagnetic Wave Generator)

  • 김영배;정순신;이홍식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1546-1547
    • /
    • 2006
  • 오늘날 전자기파의 영향은, 제어장비의 내부에 있는 기판의 전자 부품에 전자기적인 충격을 주어 장비의 오동작이나 고장을 일으키는 등 심각한 문제들이 제기 되고 있다. 이러한 임펄스 전자기파는 제어 장치에 연결된 제어전선으로 타고 들어와서 전자장비 내부의 부품들과 반사,공진등을 일으켜서 결국에는 PCB(printed circuit board)에 손상을 입혀서 그 장치들을 사용 못하게 할 수가 있다. 주파수가 광대역인 50MHz 에서 800MHz 까지의 EMI(electro magnetic interference)환경을 만들 수 있는 장치를 제작 하였다. 이러한 UWB(ultra wide band)장치는 고전압펄스를 압축 성형하여, 동작시간이 아주 빠른 ultra fast 스위치를 통해서, 펄스의 기림 시간이 수백ps의 파형을 만들어, 안테나로 전송하여 공간으로 방사시키는 장치에 대해 설계 제작하여 실험한 결과에 대해 논하고자 한다.

  • PDF

PAN-PZT 압전변압기를 이용한 CCFL 구동용 인버터 설계 (Design of the inverter for driving CCFL using PAN-PZT piezoelectric transformer)

  • 한재현;임영철;양승학;권기현
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 추계학술대회 논문집
    • /
    • pp.147-151
    • /
    • 2002
  • 액정표시장치(LCD; Liquid Crystal Display)는 표현된 정보를 가시화하기 위해 램프의 백라이트가 필수적인데 대부분 부피가 작고 효율과 휘도특성이 좋은 냉음극 방전램프가 사용된다. 램프는 고압으로 구동되며 높은 전압을 얻기 위해 일반적으로 권선 변압기를 사용한다 그러나 권선 변압기의 경우 자체의 철심이나 권선의 손실로 인하여 출력 효율의 한계가 있으며, 고압을 위해 감긴 코일은 부피를 크게 하며 무겁게 만든다. 이를 해결하기 위해 본 논문에서는 변압기 자체 손실을 줄이고 소형화가 가능하며 높은 승압비을 가진 PAN-PZT계의 적층형 압전 변압기를 제작하였으며, 회로의 손실을 줄이기 위한 영전압 스위칭(ZVS; Zero Voltage Switching)과 그리고 LCD패널과 인버터의 불필요한 간섭현상(EMI; Electro-Magnetic Interference)을 줄일 수 있으며 소형화가 가능한 풀 브리지형 압전 인버터를 설계하였다.

  • PDF

PWM인버터-유도전동기 구동시스템의 전도노이즈 예측 (The Prediction of Conducted EMI In PWM Inverter Fed Induction Motor Drive System)

  • 안정준;이정호;원충연;김영석;최세완
    • 전력전자학회논문지
    • /
    • 제4권6호
    • /
    • pp.579-588
    • /
    • 1999
  • 이 논문은 PWM 인버터-유도전동기 구동 시스템에서 발생되는 전도노이즈를 예측하기 위한 기법을 제시하였다. 전도노이즈 예측을 위한 시뮬레이션 모델을 얻기위하여 기생성분을 갖는 인버터에 대한 고주파수 모델과 고정자권선의 복수코일모델을 설계하였다. 마지막으로 결과는 시뮬레이션과 실험으로 확인되었다.

  • PDF

CM Choke의 누설 인덕턴스를 이용한 리액터 설계 (Reactor Design Using the Leakage Inductances of CM Choke)

  • 고종진;최지환;김성기;박종진;조동윤;노정욱
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 전력전자학술대회 논문집
    • /
    • pp.277-278
    • /
    • 2012
  • 본 논문은 고조파(Harmonics) 규제 만족을 위해 사용되는 리액터와 EMI(Electro-Magnetic Interference) 필터 회로에 관한 것으로서, 기존의 고조파 규제와 150kHz ~ 30MHz 대역의 EMI CE(Conducted Emission) 규제를 만족하기 위하여 각각 사용했던 리액터와 EMI 필터의 CM Choke 코일을 CM Choke의 누설 인덕턴스를 이용하여 CM Choke 코일 하나로 대체한다. 결과적으로 기존의 리액터 소자를 제거함으로써 사용 소자 개수 저감에 따른 부피 및 가격 저감을 실현할 수 있다는 장점을 가진다. 또한 실제 제품에 적용해 고조파, EMI 측정결과 문제가 없음을 검증하였으며, 온도 특성도 문제가 없음을 확인했다.

  • PDF

고속철도차량 모니터링을 위한 FBG 센서의 응용 (Application of FBG Sensors to the Monitoring of High Speed Trains)

  • 은종필;최성훈;박춘수;강동훈;송성진;김기환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.544-548
    • /
    • 2008
  • Typically electronic resistance type sensors have been used for measurement system of high-speed trains. But due to a large number of measurement quantities, we had difficulties in installing and maintaining the cables that connect sensors and measuring devices. Furthermore, signals obtained from the electronic resistance type sensors are often distorted because the sensors and cables are vulnerable to electro-magnetic interference (EMI). In this paper the characteristic of FBG sensors are compared with those of electronic resistance type sensors in application for the measurement system of high-speed trains. FBG sensors have advantages because of their multiplexing characteristic and robustness to EMI environment.

  • PDF

EEG, fMRI, EAV 및 SQUID장치(裝置)를 이용(利用)한 기공현상(氣功現狀) 측정(測定) (The Studies on Qigong state Using EEG, fMRI, EAV and SQUID Measurments)

  • 정찬원;최찬헌;윤유식;소철호;나창수;장경선
    • Korean Journal of Acupuncture
    • /
    • 제21권2호
    • /
    • pp.1-28
    • /
    • 2004
  • Objectives : Human physiological changes in the state of qigong has been measured using EEG(Electroencephalography), functional MRI(functional Magnetic Resonance Image), EAV(Electro-Acupuncture according to Voll) and SQUID(Superconducting Quantum Interference Device) measurements. Methods & Results : EEGs were measured to study the differences between Qigong masters and Qi receiver on the changes of EEG. During Qigong, an alpha waves were increased. The power spectra indicate that the peak frequency of alpha waves increased during Qigong. Qi receiver's EEG signals seemed to affected by the state of himself. Brain activation did not observed when qigong master concentrates the Qi at Laogong(P8). But a localization of fMRI signal in the sensory cortex was observed by electric acupuncture stimulation at Laogong(P8). Five phase deviation of EAV were clearly changed in the both cases of Qigong master and Qi receiver. When a Qigong master concentrates the Qi at Yintang, Laogong(P8), Qihai(CV6) meridian points during Qigong state, the change of magnetic field around acupoints Yintang, Laogong points has been measured using 40-Channel DROS-SQUID apparatus. After smoothing process of the continuously measured magnetic signal around acupoints for a few minutes, we could observe that a series of peaks, magnitude of -1.0~2.5pT appeared. But there was no significant difference in changes of magnetic signal around acupoints. Physical signals of magnetocardiogram has been measured by using 2-Channel DROS SQUID(Magnetocardiogram). Physical signals of magnetocardiogram were clealy changed at the ST segments after S-wave when qigong master concentrates the Qi.

  • PDF

안테나로부터 인접 전송선로에 전달되는 노이즈 전력 예측 (Prediction of Noise Power Disturbance from Antenna to Transmission Line System)

  • 류수정;전지운;김광호;조정민;이승배;김소영;나완수
    • 한국전자파학회논문지
    • /
    • 제25권11호
    • /
    • pp.1172-1182
    • /
    • 2014
  • 최근 모바일 기기는 더욱 더 경량화, 집적화되고 있을 뿐만 아니라, 안테나 출력의 향상을 위해 주파수 대역이 높아지면서 안테나로부터 방사되는 전자파가 기기 내부의 회로에 영향을 주어, 전체적으로 기기의 성능을 악화시키는 EMI(Electro Magnetic Interference) 문제가 빈번히 발생하게 되었다. 본 논문에서는 기기의 안테나로부터 인접한 내부 전송선로에 전달되는 노이즈 전력을 예측하기 위한 방법론을 제시한다. 전송선로에 전달되는 노이즈 전력은 기본적으로 안테나 내부 임피던스와 전송선로의 부하 임피던스에 따라 달라지지만, 그 변화의 폭이 크지 않아서 안테나와 전송선로 사이의 S-parameter 제곱의 형태로 전달되는 전력 이득의 크기로 나타낼 수 있음을 보였으며, 이렇게 정의된 전력 전달 인덱스(index)를 이용하여 전송선의 기하학적 형태에 따라서 달라지는 노이즈 전력을 표현하였다. 그 결과, 안테나의 위치의 변화에 따라서 전달되는 노이즈 전력에는 많은 차이가 났으며, 특히 굽은 전송선로에서 많은 노이즈 전달이 발생함을 알 수 있었다. 또, 이와 같은 실험적인 결과가 EM 시뮬레이션을 이용한 결과와 잘 일치하였고, 근거리, 원거리장에서의 전기장 분포를 고려할 때 그 결과들이 물리적으로 유의함을 보였다. 본 논문에서 사용한 EM 시뮬레이터는 Ansys HFSS이며, FPCB에서 많이 사용하는 Ground가 있는 CPW(Coplanar Waveguide) 형태의 전송선로를 사용하였다.