• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.380-381
• /
• 2008

This paper consider the condition monitoring technology of electrical machine in metro substation need for efficient and effective management and diagnosis. Developing management system using condition monitoring system is very competitive field, and still to a great extent seen as an unnecessary cost. There are several approaches to maintenance management in urban transit such as reliability-centered maintenance, availability-target maintenance and preventive maintenance to advanced approaches involving condition monitoring techniques. In this paper we give a brief introduction to condition-based management and diagnosis in metro substation and which management system satisfying various demanding in railway.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3115-3120
• /
• 2009

전기선로전환기는 열차가 진행하고자 하는 진로로 운행할 수 있도록 분기기를 전환시키는 설비로서 도시철도 및 간선철도를 비롯한 대부분의 철도에서 많이 설치되어 사용되고 있다. 이러한 전기선로전환기의 유지보수 작업대부분은 유지보수자들이 포터블 계측기를 이용하여 수작업으로 현장에서 모터 전원, 제어 전원, 표시 전원에 대한 측정을 하는 것이다. 특히 NS형 또는 NS-AM형 전기선로전환기의 경우에는 유지보수 주기가 너무 잦기 때문에 이러한 측정에 많은 인력이 요구되고 있을 뿐만 아니라 작업 도중 부주의에 의한 사상사고도 발생하고 있다. 본 논문에서는 이러한 유지보수 작업의 향상을 위해 현장에 설치된 전기선로전환기의 상태를 모니터링하는 시스템을 제안하고 있으며, 이러한 모니터링 시스템은 전기선로전환기에 대한 각종 측정값을 실시간으로 확인하여 유지보수 업무의 향상을 이룰 수 있을 것으로 기대된다.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1821-1829
• /
• 2017

A point machine requires lots of time and attention in terms of maintenance, since it causes 40% of failures among the railway signaling devices. The senescence of the point machine critically matters to the overall turnout system. In this paper, we analyzed the aging characteristics of the point machine by using the switching current of the point machine. The analysis is done based on the switching current measurements of the point machines deployed in the Sehwa outdoor test site and the Korail Kyongbu line. It is expected that the analysis result can be utilized for real-time diagnosis in the aspect of the maintenance of the point machines and predicting abnormal operations.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1747-1751
• /
• 2014

Interlocking system along with point machine for efficient route control secures safety of train operation by interchanging information each other. However, various types of interlocking system and point machine operating on bender specific interface bring obstacles to effective maintenance and safety. In this paper, we have investigated on interface methods to suggest standard interface module applicable to various operating system

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1130-1136
• /
• 2015

Most equipments which are used to measure the switching power of the turnout depend on imports. As the data is limited to the measurements of the switching power, it is said that the equipment is insufficient to check the errors of the turnout and the electrical point machine, and set up the data for operating and maintenance. We studied not only measurements of the switching power of all turnout being used in domestic but also the development of the turnout performance total analysis equipment which can measure switching time, voltage, and current etc. at the same time. Considering that switching power of the turnout is the most basic element to check the irregularities of the turnout, in this paper, we analyzed the irregularities of the turnout through correlation between switching power of the turnout, voltage, and current of the electrical point machine. Also we performed test in commercial railway line where the turnout of MJ81 type and NS type was installed. And it is said that the test results can be used as basic technologies for ICT based real-time diagnosis and monitoring of the turnout.

• 전기학회논문지
• /
• 제65권2호
• /
• pp.354-359
• /
• 2016

Power plants maintenance data is to be sent to management server system via a communication network. In this case, reliable communication network is required. Transmission of the power plants maintenance data is used in the wired communication network or wireless communication network. PLC communication network is a kind of wired communication network. However PLC communication network is easily affected by noise. On the vulnerable areas in power line system, such as a mountain or rural areas, it is difficult to form a power line communication network. For a wireless communication, environment are also influenced factors in wireless communication. Harsh environmental factors are bring the communication characteristic degradation. In such areas it can be used a combination of two networks and in this way the complementary function can be achieved. Power plants are distributed in various regions across the country. The appropriate communication network is needed to maintain the power plant.This study investigated the effect of environment on the wired communication and wireless communication. It would examine a variable factor which is affect to the communication characteristic. We used PLC communication for wired communication network and ZigBee communication for wireless communication network. We investigated the characteristics of a single communication network and it raised the need for a complex communication technology to complement a single communication network.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.428-432
• /
• 2014

Rotating machines are an integral part of large electrical power machinery in most of the industries. Any degradation or outages in the rotating electric machinery can result in significant losses in productivity. It is critical to monitor the equipment for any degradation's so that it can serve as an early warning for adequate maintenance activities and repair. Prior research and field studies have indicated that the rotating machines have a particular type of signal structure during the initial start-up transient. A machine performance can be studied based on the effect of degradation in signal parameters. In this paper a data-acquisition system and the FFT algorithm has been design and model using the MATLAB and Simulink. The implementation had been carried out on the TMS320 DSP Processor and various testing and verification of the machine performance had been carried out. The results show good agreement with expected results for both simulated and real-time data. The real-time data from AC water pumps which have rotating motors built-in were collected and analysed. The FFT algorithm provides frequency response and based on this frequency response performance of the machine had been measured.The FFT algorithm provides only approximation about the machine performances.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1639-1644
• /
• 2015

Auxiliary air compressor(ACM) applied to railroad cars is a device which controls amount of compressed air in order that pantographs can be mounted correctly on the roof of an electric train. Existing ACMs consist of dc motors and brushes wear out due to friction with a commutator. Therefore, continuous maintenance is required. However, three phase BLDC motors have higher power density compared to dc motors and the machine maintenance is not needed because electric commutation is possible. The three phase generally uses hall sensors to get position information and this enables the accurate control. This paper suggests an algorithm that compensates the errors occurred when the hall sensors have a breakdown for stable operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1220-1224
• /
• 2003

In this paper, we measured the radiation dose of a fuel handling machine of the CANDU type Wolsong nuclear reactor directly during operation, in spite of the high radiation level. In this paper we will describe the sensor development, measurement techniques, and results of our study. For this study, we used specially developed semiconductor sensors and matching dosimetry techniques for the mixed radiation field. MOSFET dosimeters with a thin oxide, that are tuned to a high dose, were used to measure the ionizing radiation dose. Silicon diode dosimeters with an optimum area to thickness ratio were used for the radiation damage measurements. The sensors are able to distinguish neutrons from gamma/X-rays. To measure the radiation dose, electronic sensor modules were installed on two locations of the fuel handling machine. The measurements were performed throughout one reactor maintenance cycle. The resultant annual cumulative dose of gamma/X-rays on the two spots of the fuel handling machine were 18.47 Mrad and 76.50 Mrad, and those of the neutrons were 17.51 krad and 60.67 krad. The measured radiation level is high enough to degrade certain cable insulation materials that may result in electrical insulation failure.