• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.859-866
• /
• 1996

본 고에서는 절연재료에 대한 개괄적인 성질과 종류에 대해 간단히 설명하고 현재까지 개발되어 실용화 된 신 절연재료들을 소개하고자한다. 재료에 대한 연구는 절연재료 뿐만아니라 초전도재료, 극저온 재료등 특수한 성질을 갖거나 특수한 환경에서 특성을 유지할 수 있는 재료의 개발과 연구에 관심을 기울여야 할 시기라고 판단된다. 또한 기존의 재료에 대한 면밀한 재검토와 연구.고찰을 통해 보다 향상된 특성을 갖는 재료를 개발하는 것은 근본적으로 새로운 재료의 개발과 연구만큼이나 가치있는 일이라는 사실을 항상 명심해야 할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1039-1041
• /
• 1995

This paper describes the performance of the widely used polymeric insulating material for outdoor insulation. Various methods to describe the surface aging of polymer materials such as the peak and average of the leakage current, the cumulative charge, the weight loss have been investigated. The relationship between surface current, time are plotted and discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.285-288
• /
• 1995

In this Study, it worked to get the degradation characteristics of polymer insulating materials using TSC technique. So, it prepared epoxy composities with sample, the TSC spectroscopy was applied to investigate the influence of interfacial deformation due to inorganic filler and treatments of coupling agents on the network structure and the electrical properties of epoxy composites.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.1-16
• /
• 1990

In this paper, a system to measure treeing degradation phenomena in organic insulating materials, using an image sensor, is discussed. Using an image processing technique, tree features immediately after tree initiation as well as changes in the configuration of the tree were measured. which up to now have been extremely difficult to observe by conventional visual methods. As a result, it was possible to record the image of tree propagation immediately after its first appearance, and to describe the specific characteristics of tree growth in terms of the length, the degraded area and the sequential images.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.236-242
• /
• 1994

In this paper, the streaming electrification characteristics of insulating oil were examined when the oil is contacted with solid materials in a circulating system. The streaming current($I_s$) increases with increasing oil velocity and temperature, and electrification properties depend on species of metal materials. $I_s$ in the gauze-contained electrification apparatus increases with increasing oil temperature below the temperature of 43[>$^{\circ}C$], but decreases above 43[>$^{\circ}C$]. On the other hand, $I_s$ is positive electrificated for the pipe of Fe, Cu, while it is negative electrificated for Sus. When insulating oil flows through a car fuel filter, $I_s$ increases linearly with increasing oil temperature.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1712-1719
• /
• 2015

In recent days, there was a significant development on the electrical, thermal, mechanical, physical, chemical, magnetic and optical properties of the polyamide enamel, varnish and other insulating materials by the addition of nano fillers to it. Enamel was used in High Voltage Apparatuses used in Medical Electronics as insulation. Insulating materials determine the life time of the electrical apparatuses. The life time of the insulating materials was improved by the addition of nano fillers to it. Hence the life time of the electrical apparatuses was improved by the mixing of nano fillers to the enamel. In this research, the basic dielectric properties of the enamel and enamel mixed with nano composites of silica and alumina were analyzed and compared with each other. The addition of nano fillers has improved the quality factor and capacitance of the enamel. It was also observed that the addition of nano fillers has reduced the dissipation factor and dielectric losses of the enamel. Heat produced by the dielectric losses was also reduced by adding nano fillers to it.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.61-67
• /
• 2001

In this study the electrical and mechanical characteristics of PET films ore analyzed after plasma surface treatment. After plasma treatment, the surface potential decay, surface potential and dielectric property were evaluated to analyze the electrical insulating property, and the tensile strength was measured as the mechanical characteristic. When plasma treatment was conducted for less than 10 minutes, it was found that the electrical insulating property was improved through evaporation of low molecular weight materials md cleaning of surface. However, for more than 10 minutes, the insulating property of plasma treated PET films was decreased due to excessive discharge energy. The tensile strength was hardly changed by Plasma treatment.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권1호
• /
• pp.15-24
• /
• 1994

For increasing the insulating proper-ties and the reliability of composite materials due to environmental aging, the electrical and mechanical characteristics of moisture absortion specimens and moisture desorption specimens were investigated. After moisture absorption wt% and moisture desorption wt% increased with time, a state of saturation arrived subsequent to a constant time. Moisture absorption constants with the layers of glass fiber showed 0.0117 in 1 layer, 0.0123 in 2 layers and 0.0152 in 3 layers. Electrical and mechanical characteristics dropped significantly with moisture absorbing in composite materials. Although moisture dried completly at 70.deg. C, it is impossible to obtain the electrical and mechanical characteristics before moisture absorption. Many defaults by moisture in composite materials exist at interface between epoxy matrix and filler.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권6호
• /
• pp.490-495
• /
• 1994

We investigated photoreflectance of semi-insulating GaAs with respect to modulation sources, that is, modulation beam intensity, modulation frequency, temperature, and thickness of sample. PR spectra by each modulation source turned out to be signals of low electric field third differential, and band gap values of sample were fitted by least square root method for Aspnes' theoretical equation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.134-138
• /
• 1994

According to request of insulating materials for high-voltage, recently we make effort not only to develop diagnostic skills of aging state but also to discover defects in insulating material in the early. Especially, partial discharge has been actively studied as a non-destructive diagnosis technique and very useful method. Because the method of partial discharge measurement has damages less than other conventional diagnosis technique. In this paper, the characteristics of partial discharge was investigated and studied on many samples with voids. In order to adapt as a practical diagnosis technique, it is studied on the characteristics of partial discharge and insulation breakdown in the high voltage. We suggest that partial discharge measurement can be used in order to diagnose defects in high-voltage insulation materials.