• 제목/요약/키워드: Electrical breakdown characteristics

검색결과 1,005건 처리시간 0.025초

이종접합 Gate 구조를 갖는 수평형 NiO/Ga2O3 FET의 전기적 특성 연구 (Electrical Characterization of Lateral NiO/Ga2O3 FETs with Heterojunction Gate Structure)

  • 이건희;문수영;이형진;신명철;김예진;전가연;오종민;신원호;김민경;박철환;구상모
    • 한국전기전자재료학회논문지
    • /
    • 제36권4호
    • /
    • pp.413-417
    • /
    • 2023
  • Gallium Oxide (Ga2O3) is preferred as a material for next generation power semiconductors. The Ga2O3 should solve the disadvantages of low thermal resistance characteristics and difficulty in forming an inversion layer through p-type ion implantation. However, Ga2O3 is difficult to inject p-type ions, so it is being studied in a heterojunction structure using p-type oxides, such as NiO, SnO, and Cu2O. Research the lateral-type FET structure of NiO/Ga2O3 heterojunction under the Gate contact using the Sentaurus TCAD simulation. At this time, the VG-ID and VD-ID curves were identified by the thickness of the Epi-region (channel) and the doping concentration of NiO of 1×1017 to 1×1019 cm-3. The increase in Epi region thickness has a lower threshold voltage from -4.4 V to -9.3 V at ID = 1×10-8 mA/mm, as current does not flow only when the depletion of the PN junction extends to the Epi/Sub interface. As an increase of NiO doping concentration, increases the depletion area in Ga2O3 region and a high electric field distribution on PN junction, and thus the breakdown voltage increases from 512 V to 636 V at ID =1×10-3 A/mm.

지하철 변전실용 진공주형형 몰드변압기의 난연성 확인에 관한 연구 (A Study on the Confirmation of non-flammabikity of the Cast Resin Mold Transformer in Subway Substation)

  • 정용기;장성규;곽희로
    • 조명전기설비학회논문지
    • /
    • 제12권2호
    • /
    • pp.99-107
    • /
    • 1998
  • 본 논문에서는 최근 사용이 증가하고 있는 몰드변압기의 난연성을 확인하기 위해 연소시험을 하였다. 먼저 지하철 변전소의 몰드변압기 설치현황과 호선 및 제작사별로 정류기용변압기와 고압배전용 변압기의 장애현황에 대하여 조사하였다. 다음으로 수평가열로내에 실제 몰드변압기의 고압 권선부를 설치하고, KSF 2257(건축구조 부분의 내화시험방법 : 1993)의 표준 가열 온도 곡선에 의해 가열하였다. 몰드변압기의 연소특성을 파악한 결과, KSF 2257 연소시험곡선에 의한 완전연소까지는 78분이 소요되었으며, 착화후 수평로 가열을 중지한 후 화염의 진행상황을 확인한 바 화염의 진행이 되지 않았으며, 자기소화특성을 나타냄으로써 몰드변압기의 난연성 및 자체 소화성을 확인할 수 있었다. 본 연구 결과 몰드변압기의 사고는 단락 및 과부하 등에 화재사고 보다는 몰드내 다른원인에 의해 사고 진전이 확대됨을 확인할 수 있었다.

  • PDF

저장 환경 및 원료에 따른 전기절연유 산화특성 연구 (Oxidation Characteristic Changes in Insulation Oil Depending upon Storage Environments and Oil Resources)

  • 이돈민;박천규;하종한;이봉희
    • 공업화학
    • /
    • 제27권5호
    • /
    • pp.495-501
    • /
    • 2016
  • 현재 사용되고 있는 전력 변압기의 절연유는 오랫동안 광유계에서 사용하였으나 최근 절연유 유출에 따른 환경오염인식 증가와 기존보다 고온 운전 조건에서도 절연성능 유지 필요성이 증가하면서 식물계 원료를 이용한 식물성 절연유의 사용이 검토되고 있다. 그러나 제품 특성상 생산 후 사용까지 일정기간 소요될 수 있음에도 불구하고 저장 환경에 의한 제품 변화의 연구는 아직 부족한 상황이다. 본 연구에서는 다양한 환경에서 광유계 절연유와 식물성 절연유를 노출 시킨 후 12주간 주요 물성 분석을 통해 원료별, 환경 조건별 절연유의 산화특성을 비교 검토하였다. 이 과정에서 전산가, 수분함량 그리고 절연파괴전압과 같은 항목에서 원료별 저장환경별 물성변화가 측정되었다. 식물성 절연유의 경우 분자 구조적 특징으로 광유계 절연유와 비교하여 수분함량이 증가하는 경향이 나타났으나 자체의 높은 수분 포화력으로 절연성능에는 지장이 없는 것으로 나타났다. 저장환경에서는 원료에 관계없이 외부 환경에서 일광조사에 의한 절연유의 광분해가가 나타났고 이에 따른 다양한 물성 변화도 측정되었다.

Optical Diagnostics of Nanopowder Processed in Liquid Plasmas

  • Bratescu, M.A.;Saito, N.;Takai, O.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.17-18
    • /
    • 2011
  • Plasma in liquid phase has attracted great attention in the last few years by the wide domain of applications in material processing, decomposition of organic and inorganic chemical compounds and sterilization of water. The plasma in liquid is characterized by three main regions which interact each - other during the plasma operation: the liquid phase, which supply the plasma gas phase with various chemical compounds and ions, the plasma in the gas phase at atmospheric pressure and the interface between these two regions. The most complex region, but extremely interesting from the fundamental, chemical and physical processes which occur here, is the boundary between the liquid phase and the plasma gas phase. In our laboratory, plasma in liquid which behaves as a glow discharge type, is generated by using a bipolar pulsed power supply, with variable pulse width, in the range of 0.5~10 ${\mu}s$ and 10 to 30 kHz repetition rate. Plasma in water and other different solutions was characterized by electrical and optical measurements. Strong emissions of OH and H radicals dominate the optical spectra. Generally water with 500 ${\mu}S/cm$ conductivity has a breakdown voltage around 2 kV, depending on the pulse width and the repetition rate of the power supply. The characteristics of the plasma initiated in ultrapure water between pairs of different materials used for electrodes (W and Ta) were investigated by the time-resolved optical emission and the broad-band absorption spectroscopy. The deexcitation processes of the reactive species formed in the water plasma depend on the electrode material, but have been independent on the polarity of the applied voltage pulses. Recently, Coherent anti-Stokes Raman Spectroscopy method was employed to investigate the chemistry in the liquid phase and at the interface between the gas and the liquid phases of the solution plasma system. The use of the solution plasma allows rapid fabrication of the metal nanoparticles without being necessary the addition of different reducing agents, because plasma in the liquid phase provides a reaction field with a highly excited energy radicals. We successfully synthesized gold nanoparticles using a glow discharge in aqueous solution. Nanoparticles with an average size of less than 10 nm were obtained using chlorauric acid solutions as the metal source. Carbon/Pt hybrid nanostructures have been obtained by treating carbon balls, synthesized in a CVD chamber, with hexachloro- platinum acid in a solution plasma system. The solution plasma was successfully used to remove the template remained after the mesoporous silica synthesis. Surface functionalization of the carbon structures and the silica surface with different chemical groups and nanoparticles, was also performed by processing these materials in the liquid plasma.

  • PDF

EFG 법으로 성장한 β-Ga2O3 단결정의 Sn 도핑 특성 연구 (Characteristics of Sn-doped β-Ga2O3 single crystals grown by EFG method)

  • 제태완;박수빈;장희연;최수민;박미선;장연숙;이원재;문윤곤;강진기;신윤지;배시영
    • 한국결정성장학회지
    • /
    • 제33권2호
    • /
    • pp.83-90
    • /
    • 2023
  • 최근 전력반도체 소재로 관심을 가지는 Ga2O3의 β-상은 열역학적으로 가장 안정한 상을 가지며 4.8~4.9 eV의 넓은 밴드갭과 8 MV/cm의 높은 절연파괴전압을 갖는다. 이러한 우수한 물리적 특성으로 인해 전력반도체 소재로 많은 주목을 받고 있다. β-Ga2O3는 SiC 및 GaN의 소재와는 다르게 액상이 존재하기 때문에 액상 성장법으로 단결정 성장이 가능하다. 하지만 성장한 순수 β-Ga2O3 단결정은 전력 소자에 적용하기에는 낮은 전도성으로 인해 의도적으로 제어된 도핑 기술이 필요하며 도핑 특성에 관한 연구가 매우 중요하다. 이 연구에서는 Ga2O3 분말과 SnO2 분말의 몰 비율을 다르게 첨가하여 Un-doped, Sn 0.05 mol%, Sn 0.1mol%, Sn 1.5 mol%, Sn 2 mol%, Sn 3 mol%의 혼합분말을 제조하여 EFG(Edge-defined Film-fed Growth) 방법으로 β-Ga2O3 단결정을 성장시켰다. 성장된 β-Ga2O3 단결정의 Sn dopant 함량에 따른 결정 품질 및 광학적, 전기적 특성 변화를 분석하였으며 Sn 도핑에 따른 특성 변화를 광범위하게 연구하였다.