• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.683-699
• /
• 2015

Time Domain Reflectometry (TDR) has been extensively applied for various laboratory and field studies. Numerous different TDR probes are currently available for measuring soil moisture content and detecting interfaces (i.e., due to landslides or structural failure). This paper describes the development of an innovative spiral-shaped TDR probe that features much higher sensitivity and resolution in detecting interfaces than existing ones. Finite element method (FEM) simulations were conducted to assist the optimization of sensor design. The influence of factors such as wire interval spacing and wire diameter on the sensitivity of the spiral TDR probe were analyzed. A spiral TDR probe was fabricated based on the results of computer-assisted design. A laboratory experimental program was implemented to evaluate its performance. The results show that the spiral TDR sensor featured excellent performance in accurately detecting thin water level variations with high resolution, to the thickness as small as 0.06 cm. Compared with conventional straight TDR probe, the spiral TDR probe has 8 times the resolution in detecting the water level changes. It also achieved 3 times the sensitivity of straight TDR probe.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-140
• /
• 2003

To the optimization design of molded case circuit breakers(MCCBs), it is necessary and important to calculate the electro-dynamic repulsion force acting on the movable conductor. With 3-D finite element nonlinear analysis, according to the equations among current-magnetic field-repulsion force and taking into account the ferromagnet, contact bridge model is introduced to simulate the current constriction between contacts, so Lorentz and Holm force acting on the movable conductor and contact, respectively, can be integrated to calculate. Coupled with circuit equations, the opening time of movable contact also can be obtained using iteration with the restriction of contact force. Simulation and experiment for repulsion forte and opening time of five different configuration models have been investigated. The results indicate that the proposed method is effective and capable of evaluating new design of contact systems in MCCBs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4405-4418
• /
• 2016

Automatic image completion techniques have difficulty processing images in which the target region has multiple planes or is non-facade. Here, we propose a new image completion method that uses belief propagation based on planar priorities. We first calculate planar information, which includes planar projection parameters, plane segments, and repetitive regularity extractions within the plane. Next, we convert this planar information into planar guide knowledge using the prior probabilities of patch transforms and offsets. Using the energy of the discrete Markov Random Field (MRF), we then define an objective function for image completion that uses the planar guide knowledge. Finally, in order to effectively optimize the MRF, we propose a new optimization scheme, termed Planar Priority-belief propagation that includes message-scheduling-based planar priority and dynamic label cropping. The results of experiment show that our approach exhibits advanced performance compared with existing approaches.

• 한국재료학회지
• /
• 제12권3호
• /
• pp.195-199
• /
• 2002

Planar Hall effect of ferromagnetic GaMnAs thin films was investigated for the first time. The films were grown in an optimized growth condition via molecular beam epitaxy at low temperatures. For the optimization of the growth conditions, we used reflection high-energy electron diffraction, electrical conductivity, double crystal x-ray diffraction, and superconducting quantum interference device measurements techniques. We observed that the difference between the longitudinal resistance and the transverse resistance matches the planar Hall resistance. The ratio of the planar Hall resistance at saturation magnetic field to that at zero reached above 500%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권4호
• /
• pp.255-261
• /
• 2005

With the advent of sub-90nm technologies, the system-on-chip (SoC) and system-in-package (SiP) are becoming the trend in delivering low-cost, low-power, and small-form-factor consumer electronic systems running at multiple GHz. The shortened transistor channel length reduces the transistor switching cycles to the range of several picoseconds, yet the time-of-flights of the critical on-chip and off-chip interconnects are in the range of 10 picoseconds for 1.5mm-long wires and 100 picoseconds for 15mm-long wires. Designers realize the bottleneck today often lies at chip-to-chip interconnects and the industry needs a good model to compute the inductance in these parts of circuits. In this paper we propose a new method for extracting accurate equivalent inductance circuit models for SPICE-level circuit simulations of system-on-chip (SoC) and system-in-package (SiP) designs. In our method, geometrical meshes are created and numerical methods are used to find the solutions for the electromagnetic fields over the fine meshes. In this way, multiple-GHz SoC and SiP designers can use accurate inductance modeling and interconnect optimization to achieve high yields.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.377-385
• /
• 2001

물을 전기분해하여 얻은 일정 부피비를 갖는 수소와 산소 혼합가스를 수산화가스로 명명하며, 이를 역반응시켜서 열 에너지원으로 사용하고 있다. 수산화가스는 경제성, 안전성 및 환경친화적인 고유한 특성을 지니고 있어서 현재 가스용접기에 적용하고 있으며 여러 가지 응용분야에 적용할 수 있도록 연구 중에 있다. 본 논문에서는 수산화가스의 특성에 관하여 고찰하고 발생기용 전원에 대하여 소개하고 이 중에서 아직까지 적용되지 않은 펄스전원을 적용하여 여러 가지 운전주파수에서 비교분석 하였다.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.869-876
• /
• 2018

The force of a direct current (DC) electromagnetic pump used to transport liquid lithium was analyzed to optimize its geometrical and electrical parameters by numerical simulation. In a heavy-ion accelerator, which is being developed in Korea, a liquid lithium film is utilized for its high charge-stripping efficiency for heavy ions of uranium. A DC electromagnetic pump with a flow rate of $6cm^3/s$ and a developed pressure of 1.5 MPa at a temperature of $200^{\circ}C$ was required to circulate the liquid lithium to form liquid lithium films. The current and magnetic flux densities in the flow gap, where a $Sm_2Co_{17}$ permanent magnet was used to generate a magnetic field, were analyzed for the electromagnetic force distribution generated in the pump. The pressure developed by the Lorentz force on the electromagnetic force was calculated by considering the electromotive force and hydraulic pressure drop in the narrow flow channel. The opposite force at the end part due to the magnetic flux density in the opposite direction depended on the pump geometrical parameters such as the pump duct length and width that defines the rectangular channels in the nonhomogeneous distributions of the current and magnetic fields.

• Advances in nano research
• /
• 제15권3호
• /
• pp.253-261
• /
• 2023

This study investigates the application of nano-composite materials in physical education, specifically focusing on improving the performance of sports hall flooring. The research centers on carbon nanotube reinforced polyvinyl chloride (PVC) composites, which offer enhanced mechanical properties and durability. The incorporation of carbon nanotubes as reinforcements in the PVC matrix provides notable benefits, including increased strength, improved thermal stability, electrical conductivity, and resistance to fatigue. The key parameters examined in this study are the weight percentage of carbon nanotubes and the temperature during the fabrication process. Through careful analysis, it is found that higher weight percentages of carbon nanotubes contribute to a more uniform dispersion within the PVC matrix, resulting in improved mechanical properties. Additionally, higher fabrication temperatures aid in repairing macroscopic defects, leading to enhanced overall performance. The findings of this study indicate that the utilization of carbon nanotube reinforced PVC composites can significantly enhance the strength and durability of sports hall flooring. By employing these advanced materials, the safety and suitability of physical education environments can be greatly improved. Furthermore, the insights gained from this research can contribute to the optimization of composite material design and fabrication techniques, not only in the field of physical education but also in various industries where composite materials find applications.

• 청정기술
• /
• 제29권4호
• /
• pp.255-261
• /
• 2023

파워반도체는 전력의 변환, 변압, 분배 및 전력제어 등을 감당하는데 사용되는 반도체이다. 최근 세계적으로 고전압 파워반도체의 수요는 다양한 산업분야에 걸쳐 증가하고 있는 추세이며 해당 산업에서는 고전압 IGBT 부품의 최적화 연구가 절실한 상황이다. 고전압 IGBT개발을 위해서 wafer의 저항값 설정과 주요 단위공정의 최적화가 완성칩의 전기적특성에 큰 변수가 되며 높은 항복전압(breakdown voltage) 지지를 위한 공정 및 최적화 기술 확보가 중요하다. 식각공정은 포토리소그래피공정에서 마스크회로의 패턴을 wafer에 옮기고, 감광막의 하부에 있는 불필요한부분을 제거하는 공정이고, 이온주입공정은 반도체의 제조공정 중 열확산기술과 더불어 웨이퍼 기판내부로 불순물을 주입하여 일정한 전도성을 갖게 하는 과정이다. 본 연구에서는 IGBT의 3.3 kV 항복전압을 지지하는 ring 구조형성의 중요한 공정인 field ring 식각실험에서 건식식각과 습식식각을 조절해 4가지 조건으로 나누어 분석하고 항복전압확보를 위한 안정적인 바디junction 깊이형성을 최적화하기 위하여 TEG 설계를 기초로 field ring 이온주입공정을 4가지 조건으로 나누어 분석한 결과 식각공정에서 습식 식각 1스텝 방식이 공정 및 작업 효율성 측면에서 유리하며 링패턴 이온주입조건은 도핑농도 9.0E13과 에너지 120 keV로, p-이온주입 조건은 도핑농도 6.5E13과 에너지 80 keV로, p+ 이온주입 조건은 도핑농도 3.0E15와 에너지 160 keV로 최적화할 수 있었다.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.233-241
• /
• 2018

블록암호 알고리듬 ARIA, AES를 기반으로 GCM (Galois/Counter Mode) 인증암호를 지원하는 암호 프로세서를 경량화 구현하였다. 설계된 암호 프로세서는 블록암호를 위한 128 비트, 256 비트의 두 가지 키 길이와 5가지의 기밀성 운영모드 (ECB, CBC, OFB, CFB, CTR)도 지원한다. 알고리듬 특성을 기반으로 ARIA와 AES를 단일 하드웨어로 통합하여 구현하였으며, CTR 암호연산과 GHASH 연산의 효율적인 동시 처리를 위해 $128{\times}12$ 비트의 부분 병렬 GF (Galois field) 곱셈기를 적용하여 전체적인 성능 최적화를 이루었다. ARIA/AES-GCM 인증암호 프로세서를 FPGA로 구현하여 하드웨어 동작을 확인하였으며, 180 nm CMOS 셀 라이브러리로 합성한 결과 60,800 GE로 구현되었다. 최대 동작 주파수 95 MHz에서 키 길이에 따라 AES 블록암호는 1,105 Mbps와 810 Mbps, ARIA 블록암호는 935 Mbps와 715 Mbps, 그리고 GCM 인증암호는 138~184 Mbps의 성능을 갖는 것으로 평가되었다.