• Journal of KIEE
• /
• 제11권1호
• /
• pp.62-68
• /
• 2001

In this paper it is proposed an advanced modified sliding mode control of a rotor field oriented control of induction motor. The application of this unconventional control has very good results, such as disturbance rejection and nice dynamic properties. Stability can be guaranteed even in the worst situation. A conventional "sliding mode" controller is characterised by fast switching control signal, which causes the chattering of the drive system. To overcome this problem, a modified law is used, by introducing a hysteresis band and a continuous control, which modifies the conventional law. The control is accomplished with dual TMS320C44 floating-point digital signal processor. The validity of the proposed method was verified by experiment on the propulsion system simulator, used for the development of Korean High-Speed Railway Train(KHSRT).in(KHSRT).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.797-800
• /
• 1987

A new current control scheme is suggest.ed which is suitable for ac servo inverter drives. The scheme uses a simple block diagram to produce the reference stator voltage vector, and the vector nearest to it is chosen for switching. With the same arrangment three kinds of operation modes are possible : (1) constant rate sampling, (2) constant current deviation, (3) adaptive current deviation. In mode (1) current deviation after one period is minimized, while in mode (2) and (3) intervals between switchings are maximized.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.117-123
• /
• 2009

This paper presents a sliding mode observer for the sensorless control of interior permanent magnet synchronous motor (IPMSM) drives. The sliding mode observer has been presented as a robust estimation method. Most of these previous works, however, were not for an interior PMSM (IPMSM), but for a non-salient pole PMSM and its observer design is conducted in the stationary reference frame. Thus, in this paper, we investigate the design of a sliding mode observer and its driving characteristics for an IPMSM. The proposed sliding mode observer is designed in the rotating reference frame, and good drive performance is achieved even when the observer parameters are mismatched with those of an actual motor. The proposed method is applied to a 600W IPMSM, and, then, the measurement results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.892-893
• /
• 2007

Industrial interest in switched reluctance motor (SRM) drives has varied since 1850s. This has been primarily due to the emerging markets for variable speed drives in consumer and industrial products, such as home appliances, air conditioning, hand tools, fans, pump motor, etc. However, SRM has been plagued with the acoustic noise and vibration problem by input power of fixed section. Therefore, This paper offers operating characteristics by dynamic simulation through the generalization of inductance profile and estimation of inductance according to current. the control methode are applied from DSP(digital signal processor) with voltage reference and position detection.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.79-87
• /
• 2008

This paper presents a simple circuit topology of the auxiliary active quasi-resonant DC link snubber-assisted three phase voltage source soft-switching inverter for small scale PM motor drive applications. The pulse processing drive circuit interface and its soft-switching operation are discussed from an experimental point of view. Moreover, its conductive noise is measured and evaluated for electrical AC servo motor drive as compared with that of the conventional hard switching inverter.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.899-907
• /
• 2014

This paper deals with fault-tolerant control of five-phase induction motor (IM) drives under single-phase open. By exploiting a decoupled model for five-phase IM under fault, the indirect field-oriented control ensures that electromagnetic torque oscillations are reduced by particular magnitude ratio currents. The control techniques are developed by the third harmonic current injection, in order to improve electromagnetic torque density. Furthermore, Proportional Resonant (PR) regulator is adopted to realize excellent current tracking performance in the phase frame, compared with Proportional Integral (PI) and hysteresis regulators. The analysis and experimental results confirm the validity of fault-tolerant control under single-phase open.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.151-155
• /
• 2001

The simple motor construction and low cost, fault tolerant power electronic drive has made the switched reluctance drive a strong contender for many applications. But the switched reluctance drive does exhibit higher levels of vibration and acoustic noise than that of most competing drives. The main source of vibration in the switched reluctance drive is generated by rapid change of radial magnetic force when phase current is extinguished during commutation action. In this paper, a hybrid excitation method is proposed to reduce vibration and acoustic noise of the switched reluctance drive. The hybrid excitation has 2-phase excitation by long dwell angle as well as conventional 1-phase excitation. The vibration and acoustic noise are reduced because the scheme reduces abrupt change of excitation level by distributed and balanced excitation.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.162-168
• /
• 2014

Use of nonlinear loads, such as power converters, fluorescent lamps and adjustable speed motor drives, is expected to grow rapidly. All of these loads inject harmonic currents. This paper presents the active filtering of the harmonic distortion generated by the compact fluorescent lamps (CFL). The Instantaneous active and reactive power theory (the p-q Theory) is used to design the control of parallel active filter. The control scheme has been verified using Matlab/Simulink with SimPower Systems through a set of simulation tests under different load conditions. Also, the tuning of the active power filter is performed to improve the quality of the electrical power supply.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.134-144
• /
• 2017

This paper presents an adaptive control strategy for the speed control of a four-phase switched reluctance motor (SRM) in automotive applications. The main objective is to minimize the torque ripples, despite the unstructured uncertainties, time-varying parameters and external load disturbances. The bound of perturbations is not required to be known in the developing of the proposed adaptive-based control method. In order to achieve a smooth control effort, some properties are incorporated and the proposed control algorithm is constructed using the Lyapunov theorem where the closed-loop stability and robust tracking are ensured. The effectiveness of the proposed controller in rejecting high perturbed load torque with smooth control effort is verified with comparing of an adaptive sliding mode control (ASMC) and validated with experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.258-260
• /
• 2003

In this paper, we study the reduction of the Dynamic False Contour in a new driving method. This method divides scan lines into Multi Blocks, and drives both selective write and selective erase address. Because of the characteristic of proposed waveform, each scan line has a different sustain pulse weight. Therefore, the Dynamic False Contour occurs seriously in the boundary of each Block. Finally, if scan-lines tie several lines, the Dynamic False Contour can reduce in the boundary of each Block.