• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.351-352
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.438-439
• /
• 2005

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.41-46
• /
• 2018

Experiments were carried out the phenomenal observation on effect of corona treated hotmelt laminating film in process of manufacture by 2 kinds of rolling speed and electric power variatons. Surface treatment by corona which is exposure of film surface to electron of ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and introducing reactive chemical group. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission is avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polypropylene substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle and SEM measurements. When the rolling speed of the film decreased from 1.666 [m / sec] to 0.083 [m / sec], contact angle decreased from $80[^{\circ}]$ to $64[^{\circ}]$, and the wettability was greatly improved. As the supply power increased from 0.4 [kVA] to 2 [kVA] at the corona discharge surface treatment, the contact angle decreased from $77[^{\circ}]$ to $65[^{\circ}]$, and the wettability was greatly improved.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.423-428
• /
• 2009

Recently, the marine traffics have been increased along with enlargement of overseas commerce. Increasing the marine traffic may make higher the risk of marine accidents. Especially, the rate of accidents on costal area are more frequently. As if the marine safety information can be afforded to vessel and shore, the accident rate would be down. AIS AtoN is the navigational safety support device which is subject to functional requirements of IALA and technical standards of ITU. In this paper, we extend and implement the user-defined specification of AIS AtoN with message 21 for AIS basic information, messsage 6 for status report and message 12/14 for safety management.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.194-200
• /
• 2022

As of 2020, the cumulative number of electric vehicles worldwide increased 43% from 2019, exceeding 10 million. We surveyed and analyzed important factors when purchasing electric vehicles for consumers who own electric vehicles. Through this, we tried to find an effective way to supply electric vehicles in the future. The purpose of this study is to present customized marketing proposals for companies by empirically analyzing the factors affecting consumers' electric vehicle purchases and deriving market demands for electric vehicles. We identified the market status of electric vehicles through literature research and reviewed previous studies on the factors affecting the purchase intention of electric vehicles. Through empirical studies, differences in electric vehicle purchase factors according to gender, age, and the degree of importance of performance were analyzed. To this end, the SPSS statistics package was used. Factors influencing the purchase of electric vehicles were set to mileage, charging time, new technology, degree of driving autonomous development, design, price, infrastructure for charging, the phase of maintenance and repair, by the government and local governments. In addition, the most important factors were derived, and the average difference analysis was conducted according to gender, age, and performance importance.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.273-275
• /
• 2008

본 논문에서는 하이브리드자동차(hybrid vehicle)의 고전원 전기장치 및 전기배선 충전부의 인체 접촉에 의한 감전사고의 예방을 위한 전기적 연속성의 측정방법에 대하여 논하였다. 인체 감전 보호를 위한 기본 대책으로 충전부의 기본절연, 충전부 접근에 대한 보호(배리어, 인클로져 등)가 있다. 하이브리드자동차의 전기적 연속성과 관련된 시험방법은 UNECE, ISO, Japan Attachment 등에서 언급하고 있다. 이들 기준에서 전기적 연속성은 $0.1{\Omega}$ 이하를 유지하도록 하고 있다. 본 연구에서는 하이브리드자동차의 전기적 연속성 측정 방법에 있어 외국의 기준과 규격의 내용을 검토하고 전기적 연속성 측정방법을 제시하고자 한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1169-1176
• /
• 2013

PES have been recently required to implement railway industry for its application flexibility. The PES should be commensurated with railway safety requirements. It achieved its safety through redundant PES. The redundant systems run with voting functions. The successful major voting result becomes the output of the redundant system. The redundant system have to be synchronized to vote each output results. This paper proposed an algorithm for synchronizing and a voter. The proposed algorithm and the voter are verified using simulation.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.345-354
• /
• 1999

A new type of capacitor named "Super Capacitor" has been developed, in which the properties of electric double layer formed at the interface of activated carbon electrode- liquid organic electrolyte is applied. This capacitor is small In size, light in weight, wide In temperature range(-25~$70^{\circ}C$), large in charge-discharge capability and good in voltage preservation. And this super capacitor is applied as a power back-up for electricity failure in volatile memory devices etc., a power source for a short time and a power source for operating actuators. At present the development of high power back-up types of the capacitor system and improvement of their characteristics are being actively conducted in order to find wider applications.lications.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.91-99
• /
• 2006

The diesel Auxiliary Power Unit (APU) for vehicle applications is a complex nonlinear system. For the purpose of this paper presents a dynamic average model of the whole system in an entirely physical way, which accounts for the non-ideal behavior of the diode rectifier, the nonlinear phenomena of generator-rectifier set in an elegant way, and also the dynamics of the dc load and diesel engine. Simulation results show the accuracy of the model. Based on the average model, a simple PI control scheme is proposed for the multivariable system, which includes the steps of model linearization, separate PI controller design with robust tuning rules, stability verification of the overall system by considering it as an uncertain one. Finally it is tested on a detailed switching model and good performances are shown for both set-point following and disturbance rejection.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1463-1465
• /
• 2003

In this paper, we studied on the growing characteristics of dendrite structure of melted wire deteriorated by over current. Electric wire was melted by Jolue's heat. By using HSIS(High Speed Imaging System), we found out a lot of melted parts of wire were dispersed and radiated. Electric wire had narrow melted areas in case of short fusing time. A lot of very small dots generated around the grain of copper cross-section and they were changed into dendrite structure. Dendrite structure appeared at the values lower than 2.5[A/sec]. In case of very short fusing time, fusing current was calculated by empirical formula. The Preece equation was not enough to analyze a variety of characteristics of melted wire because it did not consider melting time, atmosphere, etc.