• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.7-15
• /
• 1995

Sound pressure and particle velocity are the most essential quantities prescribing a sound field; they correspond to voltage and electric current respectively, in electric system. As electric power is the product of voltage and electric current, sound intensity is the product of sound pressure and particle velocity and it means the acoustic power passing through a unit area in a sound field. Although the definition of sound intensity is very simple as mentioned above, the method of measuring this quantity has not been realized for a long time, because it has been very difficult to measure the particle velocity simultaneously with the sound pressure. Owing to the recent development of such technologies as transducer production and digital signal processing, it has finally been realized. According to the sound intensity(SI) method, the sound power flow in an arbitrary sound field can be directly measured as a vector quantify. In this paper, the principle of the SI method is briefly explained at first and some examples of its application made in the author's laboratory are introduced.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.345-350
• /
• 2010

This paper presents a Photovoltaic Generation system using a Space Vector Modulation. PWM voltage source inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power, from 10 to 20[%]. Synchronous signal and control signal was processed by the 56F8323 microprocessor for stable modulation. Also, Waveforms output current and voltage of system controlled so that phase conforms and can supply electric power that stabilize by the unit power factor.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.65-67
• /
• 2001

PLC (Power Line Communication) is the communication method using the existing power line installed in houses and offices to convert and transmit high frequency communication signal from tens of KHz to tens of MHz, and receive the filtered signal using high frequency filter. The advantage of PLC is that PLC uses the existing power line installed in houses and offices so it does not require separate power line. Easy and convenient access using electric outlets is another advantage of PLC. However, PLC has some disadvantages such as limited transmission power, high load interference and noise, variable signal attenuation, characteristic of impedance selective possibility of frequency property. This study designed the boiler temperature control system by unit using the modem designed on the basis of technology used for PLC modem, and designed remote control system using internet. After conducting experiments with those two systems, it was possible to control stably. By commercializing this product, we can avoid unnecessary heating of separate temperature control unit, and save the cost according1y, and it is possible to control on a remote site using internet in a more convenient way.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.121.3-121
• /
• 2002

The HFC network is one of the most useful network for high-speed data communication. Optical node unit, Trunk branch amplifier, Tap-offs, and Uninterrupted power supplies (UPS) are in this network. Since power failures of the equipments in the network is crucial, UPS should be periodically monitored and controlled by the Host to prevent long power failures. This paper describes a UPS management system which is to monitor and control UPS to supply electric power to ONUs and TBAs in the network.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.562-569
• /
• 2016

This paper proposes a navigation system with a robust localization method for an underwater unmanned vehicle. For robust localization with IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and depth sensors, the EKF (Extended Kalman Filter) has been utilized to fuse multiple nonlinear data. Note that the GPS (Global Positioning System), which can obtain the absolute coordinates of the vehicle, cannot be used in the water. Additionally, the DVL has been used for measuring the relative velocity of the underwater vehicle. The DVL sensor measures the velocity of an object by using Doppler effects, which cause sound frequency changes from the relative velocity between a sound source and an observer. When the vehicle is moving, the motion trajectory to a target position can be recorded by the sensors attached to the vehicle. The performance of the proposed navigation system has been verified through real experiments in which an underwater unmanned vehicle reached a target position by using an IMU as a primary sensor and a DVL as the secondary sensor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.221-227
• /
• 2008

This paper is to show the designing for LED lights driver unit. The main purpose of driver designing is high electrical efficient performance and intelligent control LED driver. Nowadays, a lightning system with some of charactestics such as an environmentally friendly purposes with a possible reduction of electric power consumptions. We constitute a intelligent contron LED control system that helps to save an electric energy, and a communication system to control the system. This LED driver can be used for intelligent light control. This product expects to improve the light control by dimming instead of interlace on/off light control that increases the social cost such as car accidents and etc.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.12
• /
• pp.511-517
• /
• 2006

The key issues in high power, high energy applications such as electromagnetic launchers include safety, reliability, flexibility, efficiency, compactness, and cost. To explore some of the issues, a control scheme for a large current wave-forming was designed, built and experimentally verified using a 2.4MJ pulse power system (PPS). The PPS was made up of eight capacitors bank unit, each containing six capacitors connected in parallel. Therefore there were 48 capacitors in total, with ratings of 22kV and 50kJ each. Each unit is charged through a charging switch that is operated by air pressure. For discharging each unit has a triggered vacuum switch (TVS) with ratings of 200kA and 250kV. Hence, flexibility of a large current wave-forming can be obtained by controlling the charging voltage and the discharging times. The whole control system includes a personal computer(PC), RS232 and RS485 pseudo converter, electric/optical signal converters and eight 80C196KC micro-controller based capacitor-bank module(CBM) controllers. Hence, the PC based controller can set the capacitor charging voltages and the TVS trigger timings of each CBM controller for the current wave-forming. It also monitors and records the system status data. We illustrated that our control scheme was able to generate the large current pulse flexibly and safely by experiments. The our control scheme minimize the use of optical cables without reducing EMI noise immunity and reliability, this is resulting in cost reduction. Also, the reliability was increased by isolating ground doubly, it reduced drastically the interference of the large voltage pulse induced by the large current pulse. This paper contains the complete control scheme and details of each subsystem unit.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.16-17
• /
• 2011

본 논문에서는 120kW급 하이브리드 전기 차량용 IPMSM 제어기 개발 사례를 소개 한다. 높은 출력 밀도를 요구하는 하이브리드 전기차량의 특성을 고려하여 개발된 IPMSM(매입형 영구자석 동기전동기)를 대상으로 대전류, 고효율 시스템 구성을 위해 수냉식 MCU(Motor Control Unit)를 개발 하였다. 또한 효율적인 차량 전원 배선 및 냉각 유로 구성을 고려한 전원 분배 기능 및 방열판 설계기법이 적용 되었다. 개발된 MCU를 모의 해석 및 실험을 통해 검증 하였다.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.175-177
• /
• 2007

This paper presents for the torque characteristics and improving the efficiency of driving system of electric bicycle which applied IEWPM(Independently Excited Winding Permanent Magnet) motor. IEWPM motor can expand the number of phase from 3 phases to multiphase like SRM motor because stator windings are unconnected directly. BLDC motor raise rotor'-s electromagnetic torque per unit volume by using Spoke type permanent magnet. By using two photo sensor per phase and applying excited width, advance angle and bipolar control, we confirmed higher torque at a low speed, higher out-put at a high speed, and efficiency improvement at a wide speed control area.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.201-202
• /
• 2012

This paper presents design and implementation of the PCU(150 kVA 3-Phase PWM Inverter for Electric Vehicles). For Implementation of the PCU, it is consist with Case, Connectors, IGBT module for PWM switching, DC-capacitor for dc-source, resolver for sensing of speed & position, and PCB board for control & gate-driver. Also, for the purpose of stable operation of the PCU in vehicle with variable torque condition in motor, current control scheme based on torque-map are developed. According to real-car test mode, the prototype of proposed the PCU is verified with performance and stability. Thus, design and implement of the PCU are discussed, and experimental results are presented in this paper.