• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1851-1860
• /
• 2016

The traction motors in electric multiple unit (EMU) trains are powered by AC-DC-AC converters, and the DC link voltage is generated by single phase PWM converters, with a fluctuation component under twice the frequency of the input catenary AC grid, which causes fluctuations in the motor torque and current. Traditionally, heavy and low-efficiency hardware LC resonant filters parallel in the DC side are adopted to reduce the ripple effect. In this paper, an analytical model of the ripple phenomenon is derived and analyzed in the frequency domain, and a ripple control scheme compensating the slip frequency of rotor vector control systems without a hardware filter is applied to reduce the torque and current ripple amplitude. Then a relatively simple discretization method is chosen to discretize the algorithm with a high discrete accuracy. Simulation and experimental results validate the proposed ripple control strategy.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1160-1165
• /
• 2008

The development of a new railway vehicle is under progress through the Next Generation High-Speed Rail Development Project in Korea. Its aim is to develope fundamental technology of the vehicle that can run over 400km/h. The new distributed traction bogie system, 'HEMU'(High-speed Electric Multiple Unit), will be used and is different from previously developed high speed railway vehicles. Previous vehicles adopted push-pull type system, which means one traction-car drives rest of the vehicle. Due to the difference, investigation on dynamic behavior and its safety evaluation are necessary, as a part of verification of the design specification. In this paper, current progresses of researches are presented. And the High-Speed Railway vehicle system is evaluated for a dynamic characteristic simulation. Proper models including air-suspension system, wheel-rail, bogie and car-body will be developed according to the vehicle simulation scenario. International safety standard will be applied for final verification of the system. This research can propose a better solution when test running shows a problem in the parts and elements. Finally, the vehicle that has excellent performance will be developed, promoting academic achievement and technical development.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.23-28
• /
• 2013

This study focuses on finding ways to derive train's optimal ECO driving pattern, which can improve the ride quality and reduce driving energy consumption with keeping the time interval between the stations. As research method, we compared difference of currently operating train's ATO and MCS driving patterns, and concentrated upon the things need to consider in simulation in order to improve the existing pattern of ATO driving pattern's issues with securing the train operation safety. Determining driving pattern minimizing energy consumption by controlling powering within speed limit and controlling switching to coasting at appropriate point considering the track conditions for each section, and determining braking control starting time considering ride comfort and precise stopping is considered to be most important.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.429-433
• /
• 2009

Since the "Low Carbon, Green Growth" as a social requirements is attracted public attention, the policies and investments of the railway which have been less estimated than road is re-considered. Since the starting the commercial service (2004. April), the KTX have been operated successfully while transport passengers over 100million for years. And also the project for development of KHST (Korea High Speed Train ; G7) had been accomplished with a good result, the first trainset of KTX-II which base on G7 project was manufactured and testing now. On the other hand, the world's technology of the high speed train is more faster, and changing to a distributed traction system. To catch up the world's leading technology, the HEMU(High-speed Electric Multiple Unit) project will secure new technology and aims to promote the technology of domestic high-speed train. The authors indicates the result of detail review such as a curve, slope of the track and electrical dead section of the catenary to test at 400kph and also the performance simulation of the developed rolling stock in this paper. As the result, the authors devise the test scenario to perform a maximum speed test (stability at max. speed, acceleration & deceleration etc) with the restricted conditions such as track length, track available time etc by considering above result.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.916-917
• /
• 2001

We investigated the properties of a hybrid type superconducting fault current limiter (SFCL), which consists of a transformer with multiple secondary windings and resistive $YBa_2Cu_3O_7$ (YBCO) thin film stripes. The secondary windings of the transformer were coupled with each other, and a superconducting current limiting unit of YBCO stripes was connected to each of them as a switch. Simple connection in series of SFCL units tends to produce imbalance in power among the units due to slight differences in quench current. In current design, magnetic coupling between the SFCL units provides a solution to power dissipation imbalance, inducing simultaneous quench by current redistribution in the YBCO films.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.97-102
• /
• 1997

A new method based on the alternating conditional expectation (ACE) algorithm is developed to calculate axial shape index (ASI) for the 3-level excore detector. The ACE algorithm, a type of non-parametric regression algorithms, yields an optimal relationship between a dependent variable and multiple independent variables. In this study, the simple correlation between ASI and excore detector signals is developed using the Younggwang nuclear power plant unit 3 (YGN-3) data without any preprocessing on the relationships between independent variables and dependent variable. The numerical results show that simple correlations exist between the three excore signals and ASI of the core. The accuracy of the new method is much better than those of the current CPC and COLSS algorithms.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.396-407
• /
• 2002

New Electric Multiple Units that will be released in the rolling stock market are required to meet regulations of reinforced safety and conveniences for passengers. For those reasons, Vehicle purchasing cost to be increased will be unavoidable. However, The reduction of operating cost by employing effective and efficient design on the EMU at initial phase will be expected. Hence, Vehicle purchasing shall be determined to take into consideration of purchasing cost vehicle at first stage and operation cost appropriately. In order for introducing method to presume such costs, this document will show Life Cycle Cost on vehicle and its applicability.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.239-242
• /
• 2005

This paper introduced an approach of improvement of performance of Electric device for EMU type Train like as TTX. The electric equipments are characterized by insulation, Noise, cooling system etc. and Their weight arc decided by these factors. There are two kinds of power source in EMU train. First, DC voltage source, 1500 volt, 750 volt is used for subway system. Second, AC power source 25000 volt is applied to high speed train and existing main lines. Composite material has the protection of inrush current and high frequency noise. We can use this material to minimize weight of train. Additionally we can get energy saving when operator service TTX.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.245-248
• /
• 2008

This paper gives a description of the mode'ling and control of a single phase PWM(Pulse Width Modulation) converter for HEMU-400X(High-speed Electric Multiple Unit - 400 km/h experiment). The converter is part of a Auxiliary power unit supplied by the 25[kV], 60[Hz] overhead line. A model of the converter in a synchronously rotating reference frame of coordinates is used to develop a new type of control. The control system has separate controllers for the active and reactive current, permitting the free choice of the power factor. This paper proposes a new control method of PWM converter for Auxiliary power unit.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3086-3091
• /
• 2011

Many types of door system are used in the Electric Multiple Unit (EMU). The door system is categorized to the two types of door system, sliding door and plug door. The sliding door is widely used in the EMU but has weak point for the noise problem. The plug door has advantages for the noise reduction characteristic. Nowaday electric door system is widely used and motor is a main part of driving system in the door system. We have to know the exact driving position of door system to control proper operation of the door. Actually encoder or tachometer is used for the position controlling, but it makes price increase and failure increase. In this paper, we study and describe motor current calculation method to contol and know exact driving position of door system.