• 에너지공학
• /
• 제4권1호
• /
• pp.52-58
• /
• 1995

석탄가스화 복합발전 플랜트의 시스템설계를 위한 engineering package의 체계 및 방법론에 대해 소개하였다. Engineering package는 플랜트 전체 개념설계 과정과 주요 공정을 구성하는 요소에 대한 설계/해석/시험 과정으로 나누어 진다. 개념설계과정은 설계목적과 제한조건을 충족시키도록 플랜트구성 설계, 정적/동적 시뮬레이숀, 요소별 설계사양 결정 및 Data Base Management System으로 이루어지며, 개념설계 과정의 한부분인 주요요소의 설계는 1차원 성능해석, 2/3차원 열유체해석 및 실험 그리고 구조, 진동 해석 등으로 구성되는 반복적 과정이다. 그러므로, 본 연구에서는 이러한 설계체계들의 개발전략을 설명하고, 현재 이루어진 추진결과에 대해 설명하였다.

• Journal of information and communication convergence engineering
• /
• 제3권2호
• /
• pp.101-104
• /
• 2005

Recently advanced countries are making every effort to promote the efficiency of electric power production and supply, to deal with the environmental problems, and to develop the new energy. In particular, they are driving forward to develop various technologies for electric power in mid-long term, that are technology for building infrastructure of power transportation, establishing service network for account management using electronic technologies, elevating economic productivity by innovative electronic technologies, control-ling the discharge of global warming gas, using clean efficient energy, and so forth. However, power technology of Korea lagged behind than technology of advanced countries. Also, resources for developing power technology are limited in our country. Therefore, it is necessary to improve the efficiency of R&D investment. For it, our country must compare and analyze with technologies of advanced countries which are taking competitive advantage in the main future energy. Through comparative analysis, limited R&D resources of our country must be concentrated on technologies that can secure competitive advantage from now on.

• 한국전자통신학회논문지
• /
• 제18권2호
• /
• pp.277-284
• /
• 2023

소규모 기업이 산재한 산업단지는 에너지 관리시스템을 구현하기가 쉽지 않아 에너지관련 데이터를 수집하여 조정하는 방법을 주로 사용한다. FEMS는 수동적 에너지 관리 방식에서 IoT와 ICT를 활용하는 능동적 에너지 관리 방식으로의 패러다임 변화 요구에 대응하는 시스템이다. 본 연구에서는 화학산업단지에 소재하고 있는 중소기업을 대상으로 공장에너지 관리시스템을 설계한다. 각 기업에 구축된 설비의 전력에너지를 대상으로 FEMS를 통하여 에너지를 절감하는 방안과 효율을 검토하여 효율성을 확인하였다. FEMS의 비용 효과성은 수용 기업의 업무 프로세스 내에서 책임과 권한이 부여된 인력에 의해 활용될 때 창출된다. 따라서 기업의 조직과 에너지 경영 목표 달성을 위한 에너지 경영 시스템의 기획, 지원, 운영 및 평가, 그리고 지속적 개선에 적용할 수 있는 EMS를 활용하는 것이 필요하다.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1419-1424
• /
• 2018

Very short-term electric load forecasting is essential for real-time power system operation. In this paper, a very short-term electric load forecasting technique applying the Kalman filter algorithm is proposed. In order to apply the Kalman filter algorithm to electric load forecasting, an electrical load forecasting algorithm is defined as an observation model and a state space model in a time domain. In addition, in order to precisely reflect the noise characteristics of the Kalman filter algorithm, the optimal error covariance matrixes Q and R are selected from several experiments. The proposed algorithm is expected to contribute to stable real-time power system operation by providing a precise electric load forecasting result in the next six hours.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.685-687
• /
• 2002

For several decades researches and developments on superconducting magnetic energy storage (SMES) system have been done for efficient electric power management. Korea Electrotechnology Research Institute(KERI) have developed of a 1MJ. 300kVA SMES System for improving power quality in sensitive electric loads. We developed the code for design of a SMES magnet. which could find the parameters of the SMES magnet having minimum amount of superconductors for the same stored energy. and designed the 1MJ SMES magnet by using it. This paper describes the design. fabrication and experimental results for the SMES magnet. cryostat, HTS current lead and power converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2310-2312
• /
• 2004

In Korea Electric Power Corporation (or KEPCO), several Demand-Side Management (or DSM) program have been carried out to effectively meet electric power demand at least costs by modifying customers electricity use patterns. As one of them, KEPCO applies low-priced night thermal-storage power service for heat appliances to facilitate efficient use of power facilities by shifting relatively high daytime demands to night hours to build loads during the off-peak periods. In the market of heat-storage type water-heater, electric water-heater has been mostly used, but it has low energy efficiency and needs high capacity electric equipments. So in order to replace these electric water heaters, 15 HP air-source heat pump water heater is developed in Korea Electric Research Institute (or KEPRI). This paper shows that measurement system for performance testing of heat pump water heater is established and heating capacity and performance is analyzed and measured for out-door environmental change.

• 디지털산업정보학회논문지
• /
• 제12권3호
• /
• pp.231-257
• /
• 2016

Several efforts to replace the use of existing fossil energy resources have already been made around the world. As a result, a new industry of renewable energy has been created, and efficient energy distribution and storage has been promoted intensively. Among the newly explored renewable energy sources, the most widely used one is solar energy generation, which has a high market potential. An energy storage system (ESS) is a system as required. In this paper, the design and implementation of an ESS for the efficient use of power in stand-alone street lights is presented. In current ESS applied to stand-alone street lights, either 12V~24V DC (from solar power) or 110V~220V AC (from commercial power) is used to recharge power in systems with lithium batteries. In this study, an ESS that can support both solar power and commercial power was designed and implemented; it can also perform emergency recharge of portable devices from solar powered street lights. This system can maximize the scalability of ESSes using lithium batteries with efficient energy conversion, with the advantage of being an eco-friendly technology. In a ripple effect, it can also be applied to smart grids, electric vehicles, and new, renewable storage markets where energy storage technology is required.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.485-487
• /
• 2001

Electric power has traditionally been supplied to the demander through power generation, its transmission, and final distribution system. It is, however, expected that the various dispersed power system will be located near demanders and act as a power source based on the efficient management of electric power demanders and the optimal utilization of substitute energy. More stable electric power and efficient utilization of various power sources can be guranteed through the connection of the dispersed power system into the existing power system. It is the purpose of this study that, in the case of the connection of dispersed power system into the existing distribution line, effects of the connection on the power quality and plans for protection of power equipments are discussed and solutions of them are proposed.

• 산업기술연구
• /
• 제30권A호
• /
• pp.9-15
• /
• 2010

Recently, Smart Grid is a emerging topic in power and communication industry. Smart Grid refers to a evolution of the electricity supply infrastructure that monitors, protects, and intelligently optimize the operation of the interconnected elements including various type of generators, power grid, building/home automation system and end-use consumers. In order to successful implementation of Smart Grid, energy management function will be the key factor that coordinates and optimally controls the various loads according to the operating condition and environments, and the load patterns in residential and commercial building will be required as fundamental element for load management. In this study, we collects many types of energy usage data of electric appliances, analyze their load curves, and make the general load patterns for electrical appliance.

• 인터넷정보학회지
• /
• 제16권1호
• /
• pp.11-17
• /
• 2015