• Current Applied Physics
• /
• 제18권12호
• /
• pp.1473-1479
• /
• 2018

Recently multiferroic materials have attract great interest for the applications on memorial, spintronic and magneto-electric sensor devices for their spontaneous magneto-electric coupling properties. Research and development of the various kinds of multiferroics are indispensable factor for a new generation multifunctional materials. In this research, mechanical, electronic, magnetic and nonlinear optical properties of La modified $BiLaFe_2O_6$ (BLFO) and Mn modified $Bi_2FeMnO_6$ (BFMO) were studied as new members of multiferroic $BiFeO_3$ (BFO) series by first-principles calculations, and compared with the pure BFO to discover the optimized properties. Our results show that BLFO and BFMO have good mechanical stability as revealed by elastic constants that satisfy the stability criteria. All these compounds exhibit anisotropic and ductile nature. The enhanced properties by La and Mn substitution, such as increased hardness, improved magnetism, decreased band gap and comparable second harmonic generation responses reveal that the new multiferroic members of BLFO and BFMO would get wider application than their BFO counterpart. Our study is expected to providing an appropriate mechanical reference data as guidance for engineering of high efficiency multifunctional devices with the BFO series.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.55-59
• /
• 2022

본 논문에서는 플라즈몬 공명 현상을 통하여 나노 입자 주변의 전기장을 증폭시키며, 흡광률을 높일 수 있는 구조를 시간영역 유한차분(FDTD)시뮬레이션을 이용하여 나노입자를 평면에 배열하였을 때와 비교하여 나노 구조에 배열하였을 때의 전기장과 흡광도를 비교하였다. 또한 나노구조의 폭을 240 nm ~ 300 nm로 조절하여 입자간의 간격이 좁을수록 광 흡수율이 높음을 보이고자 하였다. 또한 UV 임프린트를 통하여 나노 입자와 나노 구조를 표면에 함께 형성시키는 방법에 대한 연구를 진행하였다. 해당 구조에 입자를 형성하기 위하여 스프레이 코팅을 이용하여 나노 입자를 구조 제작에 사용되는 몰드에 먼저 배열한 후, UV 임프린팅을 통해 제작하였고 나노구조와 입자가 함께 형성됨을 Scanning Electron Microscopy 로 확인하였다.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.99-103
• /
• 2005

In this paper, a novel circuit topology of a three-winding coupling inductor-assisting a high-frequency PWM boost chopper type DC-DC power converter with a high boost voltage conversion ratio and low switch voltage stress is proposed for the new energy interfaced DC power conditioner in solar photovoltaic and fuel cell generation systems. The operating principle in a steady state is described by using its equivalent circuits under the practical condition of energy processing of a lossless capacitive snubber. The newly-proposed power MOSFET boost chopper type DC-DC power converter with the three-winding coupled inductor type transformer and a single lossless capacitor snubber is built and tested for an output power of 500W. Utilizing the lower voltage and internal resistance power MOSFET switch in the proposed PWM boost chopper type DC-DC power converter can reduce the conduction losses of the active power switch compared to the conventional model. Therefore, the total actual power conversion efficiency under a condition of the nominal rated output power is estimated to be 81.1 ％, which is 3.7％ higher than the conventional PWM boost chopper DC power conversion circuit topology.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.145-145
• /
• 1997

Recent progress of electric technology requires new piezoelectric crystals having superior properties such as zero temperature coefficients and large electromechanical coupling factors. We have developed a series of new leading chandidates, La$_3$Ga5SiO14(langasite, LGS), La3Nb0.5Ga5.5O14(LNG), La3Ta0.5O14(LTG), to satisfy those requirements. High quality LGS, LNG and LTG single crystals, with dimensions of 2 inches in diameter, were successfully grown by the Czochralski method at a pulling rate of 1mm/h. Since no variation of chemical composition was observed when whole melt in a crucible was crystallized, congruency of these compositions was confirmed. Physical constants such as elastic constants, dielectric constants and piezoelectric constants were measured. Filters and oscillators made of grown LGS, LNG and LTG single crystals showed superior properties such as three times wider passband than that of quartz, low insertion loss and easy processing, Langasite family crystals were shown to be superior materials to other known materials such as quartz, LiTaO$_3$, $\alpha$-AlPO$_4$ and Li$_2$B$_4$O7.

• 대한전자공학회논문지SD
• /
• 제39권10호
• /
• pp.48-56
• /
• 2002

일반 광섬유에 아크 방전을 인가하여 코어 및 클래딩의 직경 변화를 발생시켜 장주기 격자를 제작하는 방법이 소개되었다. 본 연구에서는 매우 약한 아크를 반복적으로 발생시켜 광섬유에 매우 약한 변형을 수 차례 주어 광섬유 격자 직경을 정밀하게 조절 할 수있는 방법을 사용한 중첩 장주기 광섬유 격자 제조 방법을 제안하였다. 또한 위상정합 조건을 이용하여 장주기 광섬유 격자의 직경 변화에 따른 공진 파장의 변화를 이론적으로 유도하였으며, 실험을 통해 확인하였다. 또한 실험 결과 아크 유도 광섬유 격자의 주기와 공진 파장과의 관계가 위상 정합 조건과 일치하는 것을 확인하였으며, 온도 변화에 따른 공진 파장의 변화를 측정하고 기계적 강도를 측정하였다.

• Wind and Structures
• /
• 제25권5호
• /
• pp.415-432
• /
• 2017

The nonlinear aerodynamic instability of a tensioned plane orthotropic membrane structure is theoretically investigated in this paper. The interaction governing equation of wind-structure coupling is established by the Von $K\acute{a}rm\acute{a}n's$ large amplitude theory and the D'Alembert's principle. The aerodynamic force is determined by the potential flow theory of fluid mechanics and the thin airfoil theory of aerodynamics. Then the interaction governing equation is transformed into a second order nonlinear differential equation with constant coefficients by the Bubnov-Galerkin method. The critical wind velocity is obtained by judging the stability of the second order nonlinear differential equation. From the analysis of examples, we can conclude that it's of great significance to consider the orthotropy and geometrical nonlinearity to prevent the aerodynamic instability of plane membrane structures; we should comprehensively consider the effects of various factors on the design of plane membrane structures; and the formula of critical wind velocity obtained in this paper provides a more accurate theoretical solution for the aerodynamic stability of the plane membrane structures than the previous studies.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1656-1663
• /
• 2016

A capacitive wireless power transfer (C-WPT) system uses an electric field to transmit power through a physical isolation barrier which forms a pair of ac link capacitors between the metal plates. However, the physical dimension and low dielectric constant of the interface medium severely limit the effective link capacitance to a level comparable to the main switch output capacitance of the transmitting circuit, which thus narrows the soft-switching range in the light load condition. Moreover, by fundamental limit analysis, it can be proved that such a low link capacitance increases operating frequency and capacitor voltage stress in the full load condition. In order to handle these problems, this paper investigates optimal design of double matching transformer networks for C-WPT. Using mathematical analysis with fundamental harmonic approximation, a design guideline is presented to avoid unnecessarily high frequency operation, to suppress the voltage stress on the link capacitors, and to achieve wide ZVS range even with low link capacitance. Simulation and hardware implementation are performed on a 5-W prototype system equipped with a 256-pF link capacitance and a 200-pF switch output capacitance. Results show that the proposed scheme ensures zero-voltage-switching from full load to 10% load, and the switching frequency and the link capacitor voltage stress are kept below 250 kHz and 452 V, respectively, in the full load condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.325-328
• /
• 1991

In this study, $0.085Ba(La_{1/2}Nb_{1/2})O_3-0.915Pb(Zr_yTi_{1-y})O_3$(y=0.45, 0.50, 0.55, 0.60, 0.65[mol]) transparent electrooptic ceramics were fabricated by two-stage sintering method. Increasing the $PbZrO_3$ contents, dielectric constant was increased and Curie temperature was decreased. In the composition of 0.55[mol] $PbZrO_3$, electromechanical coupling factor was 0.43. From the results of ferroelectric hysteresis loop and transmitted light intensity with electric field, the compositions of 0.65, 0.60, 0.55[mol] $PbZrO_3$ was applicable to electroopticmemory device and the compositions of 0.50, 0.45[mol] $PbZrO_3$ was applicable to linear electrooptic device.

• 천문학논총
• /
• 제15권spc2호
• /
• pp.1-13
• /
• 2000

Through the coupling between the near-earth space environment and the polar ionosphere via geomagnetic field lines, the variations occurred in the magnetosphere are transferred to the polar region. According to recent studies, however, the polar ionosphere reacts not only passively to such variations, but also plays active roles in modifying the near-earth space environment. So the study of the polar ionosphere in terms of geomagnetic disturbance becomes one of the major elements in space weather research. Although it is an indirect method, ground magnetic disturbance data can be used in estimating the ionospheric current distribution. By employing a realistic ionospheric conductivity model, it is further possible to obtain the distributions of electric potential, field-aligned current, Joule heating rate and energy injection rate associated with precipitating auroral particles and their energy spectra in a global scale with a high time resolution. Considering that the ground magnetic disturbances are recorded simultaneously over the entire polar region wherever magnetic station is located, we are able to separate temporal disturbances from spatial ones. On the other hand, satellite measurements are indispensible in the space weather research, since they provide us with in situ measurements. Unfortunately it is not easy to separate temporal variations from spatial ones specifically measured by a single satellite. To demonstrate the usefulness of ground magnetic disturbance data in space weather research, various ionospheric quantities are calculated through the KRM method, one of the magneto gram inversion methods. In particular, we attempt to show how these quantities depend on the ionospheric conductivity model employed.

• 한국재료학회지
• /
• 제17권12호
• /
• pp.660-663
• /
• 2007

Piezoelectric energy harvesting from our surrounding vibration has been studied for driving the wireless sensor node. To change the vibration energy into the electric-energy efficiently, the natural frequency of cantilever needs to be adjusted to that of a vibration source. When adding 6.80g mass on the end of the fabricated cantilever, a natural frequency shifts from 136 Hz into 49.5 Hz. In addition, electro-mechanical coupling factor increased from 10.20% to 11.90% and resulted in the 1.18 times increase of maximum output power.