• 대한교통학회지
• /
• 제30권3호
• /
• pp.95-106
• /
• 2012

수도권 광역철도는 운영 범위의 공간적 확대 및 신설 건설, 급행전철 도입 등 다양한 환경 변화에 직면하고 있으며 이는 이용수요 변화의 원인이 된다. 또한 시간대별 이용수요는 열차운행 특성(운행횟수, 편성량수 등) 뿐만 아니라 광역철도 이용자 서비스 평가 지표 중의 하나인 차내 혼잡도에도 영향을 미친다. 이에 본 연구는 철도의 효율적 운영을 위한 측면에서 열차 편성량수의 최소화와 운영비용, 이용자 서비스간의 관계를 파악하여 최적의 열차편성 조정 대안을 도출하고자 하였다. 시스템 다이나믹스(System Dynamics) 시뮬레이션 프로그램인 Powersim을 활용하여 편성량수 최적화 시뮬레이션을 구현하였으며 그 결과 경부선은 현 운행시에도 한계혼잡도(150%)를 초과하는 역이 일부 존재하여 현행 유지함이 최적이라고 분석된 반면 경인선, 과천선 등의 경우 편성량수를 2~4량 감소시켜도 한계혼잡도를 초과하지 않아 적용 가능할 것으로 분석되었다. 또한 장항선 구간(천안~신창)은 경부선과 동일하게 현재 1편성 10량으로 운행되고 있으나 4량 운행시에도 혼잡도가 크게 증가 하지 않으므로 천안~신창구간의 단거리 셔틀운영방안에 대한 검토가 필요할 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1389-1396
• /
• 2008

There are many studies on the ride comfort for the train from the viewpoint of passenger. But there are only a few studies on the ride comfort for engineers in the locomotive. The railway has the track conditions, such as irregularities, rail joints, turnout, level crossing, transition curves and super-elevation ramps, which cause vibrations. Generally, the ride comfort for the train is evaluated by using the vibrations. In this study, vibration accelerations have been measured in the cabin rooms of locomotives, such as DL(Diesel-electric Locomotive), DHC(Diesel Hyduralic Car) and NEL(New-Electric Locomotive) when running on the Kyoungbu conventional line. And then, their ride comforts has been analyzed and evaluated by statistical method according to UIC 513R.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.228-230
• /
• 2006

While trains perform a complete precision stopping control at stop point, it is essential to keep better commuters comfort in prompt. Because a train's brake force tends to increase a brake effort in a low speed and a low brake effort, a brake force in motor cars must be increased to keep better passenger comfort, to control the special braking qua1ities and to prevent the impact of the automatic coupler rather than trailer's, Rail cars must have a special braking process for the train stopping control. In the train stop mode, the train stopping control is designed to start at 20km/h. It starts by Dynamic brake blending, and then finally stops by only the friction. If these process are not exactly activated, the train may fail a complete precision stop. In this report, it studied the electric and friction brake processing during the precious stopping control. To achieve exact test results, the speed reference has to be reduced the calculated difference. In the precision stopping control. the ways of the keeping brake force in motor car was analyzed and some solutions of controling air pressure was brought up by means of direct test in main line, This study was based on line 5 in Seoul Metropolitan subway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.724-729
• /
• 2005

Winter weather condition can cause icing and ice coats on 25 kV overhead contact wire. This generates shocks at the mechanical interface of the collecting strips of the pantograph and the contact wire and extra electrical resistance, which may affect quality of current collection at the contact wire / collecting strips of pantograph interface. De-icing operations should he performed just before train operation to avoid the formation of another ice layer. Thus, the work in this paper is investigation and analysis of de-icing system which could be applied to the electric car line of railways.

• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.41-48
• /
• 2000

최근 산업현장의 모든 부분에서 자동화의 요구가 급격하게 증가되고 있다. 지금까지의 사격장 시스템은 정적인 환경을 중심으로 설계되어져 왔다. 그러나, 실제의 사격상황은 목표물이 동적이므로 다른 사격 환경 변화가 요구된다. 본 연구에서는 동적인 사격환경을 구현하기 위해 1개 사로에 4대의 타겟을 설치하여 사격순서를 순차 및 비순차로 구분하고 사격시간을 가변적으로 조정할 수 있게 하였다. 그리고. 자동차 및 빌딩 자동화에 많이 응용되고 있는 CAN(Controller Area Network)을 이용함으로써 효율적인 통신을 가능하게 하였다. CAN은 높은 데이터 전송률과 안정성을 제공할 수 있어 다수의 ECU(Electric Control Unit)를 상호 연결하여 분산된 실시간 제어를 효율적으로 지원할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.356-361
• /
• 2005

Earth brush for electrical multiple units(EMUs) is a device through which the current of the EMU load's consumed power fed from the DC 1,500V overhead line (or from the AC 25.000V catenary) flows via axle to the rail(ground) and which prevents the electric corrosion of the axle bearings by preventing the current flow to the axle bearings caused by electric potential from the magnetic field when the bearings rotate together with the earthing function when a thunderbolt falls or a surge comes. The earth brush wear rates among cars, however, shows quite differences when the earth brushes after being separated from the holders are measured with vernier callipers every 6 months of maintenance period. Main causes of the earth brush wear are divided as mechanical, electric arc and electrical one, and the factors can be running speed, current, harmonics, connection state. spring tension, earth brush material, lubricant and so on. but only the earth brushes of the motor(M1) car show the highest wear rate and moreover maintenance difficulty occurs because of the wear rate differences among e earth brushes in one holder. The reason for these preponderant wear comes from the design concept of making preponderant current flow to some particular earth brushes and moreover the heat generated by the harmonics when the inverter starts to operate accelerate the wear. By defining these causes through experiments. I hope that the found results would be helpful for the future EMU design, safety, economy and maintenance.

• Journal of East Asia Management
• /
• 제5권1호
• /
• pp.75-90
• /
• 2024

About 100 years after the start of mass production by American car maker Ford in 1913, the automobile industry has come to a major transformation in 100 years. In this transformation period, automakers are facing the biggest challenge of converting power sources, the basis of automobiles, from existing internal combustion engines to electric vehicles. Hybrid vehicles have been released in Japan since the late 1990s, and changes in automobile power sources have occurred early. In order to gain global leadership in hybrid vehicles, Japanese automakers and the Japanese government joined forces to promote the growth of the domestic hybrid vehicle market. The government has implemented a policy to substantially subsidize the high price of hybrid cars compared to internal combustion engine cars by providing purchase subsidies and tax benefits to buyers. Toyota has increased its line-up of hybrid cars around the Prius and has further strengthened communication with customers for the sale of hybrid vehicles. As a result of continuing these efforts for about 20 years, the percentage of Japan's hybrid vehicle market in 2022 reached 51% for passenger cars. Recently, each country has been setting and promoting aggressive goals for electric vehicles that require a wider range of physical and institutional infrastructure than hybrid vehicles. This study aims to assess the growth of electric vehicles by looking at the trend of hybrid vehicles and how they've been distributed in the Japanese market.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.515-521
• /
• 2000

본 논문은 전동차용 추진장치인 IGBT VVVF 인버터의 현차시험에 관한 것이다. IGBT VVVF인버터는 1,650kVA급으로 개발되었다. 추진 인버터의 신뢰성과 성능을 확인하기 위하여 서울시 지하철 6호선에서 본선시험을 하였다. 시험 차량구성은 4M4T로 구성되었으며, 전장품은 4대의 VVVF인버터, 16대의 견인전동기 및 2대의 SIV로 구성하였다. 추진장치는 1C4M으로 구성하였다. 현차시험을 통하여 추진용 인버터의 우수한 가·감속 능력과 가가속도 특성 및 구배에서의 등판능력을 확인 할 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6214-6220
• /
• 2015

열차위치 검지시스템에는 일반적으로 궤도회로장치가 거의 100여년을 안정적으로 사용되어 왔으나, 일반철도 구간의 역 구내, 측선, 해안선 구간 및 열차운행 빈도가 적은 지선 구간의 건널목 등에서는 녹 발생으로 궤도회로 단락불능에 따라 해소방안이 필요하다. 국내에서는 고속철도의 차축온도검지시스템과 통신기반열차제어시스템 분기부 일부에 차축카운터시스템이 사용되고 있으나, 해외의 경우 많은 국가에서 차축카운터 시스템이 없는 간선 및 지방 철도를 상상하는 것은 이제 불가능하고 지하철, 전차, 그리고 산업철도에서 상당한 증가가 확인되었다. 본 논문에서는 일반철도 구간의 역 구내 측선의 본선 및 분기부에 시험적용을 위해 기존 설치되어 있는 궤도회로와 병렬로 설치하여 로그분석을 하여 차축카운터시스템의 동작상태를 확인하였다. 그리고 오봉기지역 및 청주역 운행선 상 설치하여 연동장치와의 인터페이스 시험 및 이를 실용화하기 위한 시험결과를 분석하고, 시스템 안전측 설계, 제작 및 시스템 요구조건 등을 정립하였다.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1093-1098
• /
• 2007

Tilting trains are currently in operation in 13 countries around the world. With the advances in tilting technology, verification of economic efficiency, and changes in economic situations, the introduction of tilting trains will rapidly spread across the globe. The measurement system is composed of the industrial computers installed in the console and the measurement racks mounted on each car. It is utilized to accumulate the data by the communication card and the optical cable. The optical cable and power cable are coupled at the connector located in joint of train to make easy to disconnect car each other. The signal conditioner is designed to choose and to extend the channel for each sensor readily. The sensor measurement rack has adopted as decentralization method. It is installed in each car to minimize the cable length. In also, it is manufactured based on 19"rack and covered to protect the cable. In this study, the programs for measurement and analysis were also developed to understand the traction system characteristics of TTX. Using this measurement system, we studied that acceleration test, re-powering test, and gradually powering test. The acceleration performance of TTX is 1.735 km/h/s, and it is inner standard value. The notch test result from 1 to 7 steps, DC link voltage is under standard value, and the output electric current of inverter is controlled normally. From the test results, we saw the performances of the traction systems are normal.