• 동력기계공학회지
• /
• 제17권1호
• /
• pp.71-76
• /
• 2013

This study is experimentally performed for using the oyster shell as a desiccant in the batch type system. The peltier element(thermoelectric device) is used for absorbing and releasing the adsorption and desorption heat generation. The cooling and heating effects of peltier element exist in this experiment and these effects are generally known phenomena among some references. The increase in electric current induced into peltier element is effectively release the heat generation of adsorption and desorption. Consequently, the non-dimensional adsorption and desorption amount would increase with increase in electric current. However, in the case of adsorption, the increase of induced current into peltier element, the heat of cold side can not release sufficiently. So the heat of hot side of peltier is transferred into the cold side.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.432-437
• /
• 2005

혼합가스로부터 $CO_2$를 분리, 회수하기 위하여 활성탄소섬유를 흡착제로 사용한 전기변동흡착(electric swing adsorption, ESA) 공정의 타당성을 검토하였다. 활성탄소 섬유는 상압에서도 $CO_2$에 대해 빠른 흡착 속도를 보였으며, 비교적 짧은 흡착대와 긴 파과시간, 흡착제의 단위무게당 높은 흡착량을 나타내었다. 포화흡착된 흡착탑의 재생에서 비표면적이 큰 활성탄소섬유일수록 일정한 모양의 파과곡선을 유지하여 흡착-탈착의 재생사이클에 유리하였다. 진공탈착에 의한 흡착탑의 재생률은 64 cmHg의 압력에서도 64％ 이상이었고, 전기탈착을 병행한 hybrid 재생단계에서는 17％의 추가적인 재생률을 보이며 7-8 Wh의 낮은 재생에너지에서도 높은 재생률을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.162-167
• /
• 2010

We investigated the adsorption and desorption characteristics of benzene molecules on $Si(001)-2{\times}n$ surfaces using a variable-low temperature scanning tunneling microscopy. When benzene was adsorbed on a $Si(001)-2{\times}n$ surface at a low coverage, five distinct adsorption configurations were found: tight-binding (TB), standard-butterfly (SB), twisted-bridge, diagonal-bridge, and pedestal. The TB and SB configurations were the most dominant ones and could be reversibly interconverted, diffused, and desorbed by applying an electric field between the tip and the surface. The population ratios of the TB and SB configurations were affected by the benzene coverage: at high coverage, the population ratio of SB increased over that of TB, which was favored at low coverage. The desorption yield decreased with increasing benzene coverage and/or density of vacancy defect. These results suggest that the interaction between the benzene molecules is important at a high coverage, and that the vacancy defects modify the adsorption and desorption energies of the benzene molecules on Si(001) surface.

• 공업화학
• /
• 제30권4호
• /
• pp.472-478
• /
• 2019

막 축전식 탈염(MCDI) 셀에 공급하는 총 전하(TC)를 조절하여 경도물질($Ca^{2+}$)을 안정하게 탈염할 수 있는 방법을 연구하였다. 흡착과정에서 TC를 변화시키면서 흡착(1.5 V)과 탈착(0.0 V)을 30회 반복하였다. 탈염과정에서 유출수의 농도와 pH, 흡착 및 탈착량, 전류밀도와 셀 전위의 변화를 분석하였다. MCDI 셀에 사용된 탄소전극의 최대허용전하(MAC)는 46 C/g로 측정되었다. MAC 이하의 TC (40 C/g)에서 운전한 결과 전극반응이 일어나지 않아 장기간 운전에서도 안정적인 탈염특성을 얻을 수 있었다. 반면, MAC 이상의 TC (50, 60 C/g)에서 운전한 경우 유출수의 농도와 pH가 크게 변하였다. 또한 전극반응으로 인해 전극표면에 스케일이 생성되어 셀의 전기저항이 점차 증가하였다. 이를 통해 흡착과정에서 MCDI 셀에 공급하는 전하를 제어함으로써 전극반응 없이 경도물질을 안정하게 제거할 수 있음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.764-767
• /
• 2005

Photoaligning polymers usually possess "sofe" surface, containing flexible groups and provide relatively small anchoring energy($W<10^{-2}$ erg $cm^{-2}$). In this case field-induced reorientation of director on the aligning surface is essential. We have shown that surface director reorientation can modify the aligning surface and result in gliding of the axis of easy orientation of LC. this phenomena together with adsorption/desorption of ions in electric field cause strong sticking effect in LCDs photoaligning materials. We proposed a method of decreasing of the sticking effect based on irradiation of the photoaligning surface by an unpolarized light.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.660-666
• /
• 2010

Carbon aerogels are promising materials as electrodes for electrical double layer capacitors (EDLCs). An optimum process is presented for synthesis of nanoporous carbon aerogels via pyrolyzing resorcinol-formaldehyde (RF) organic aerogels, which could be cost-effectively manufactured from RF wet gels. The major reactions between resorcinol and formaldehyde include an addition reaction to form hydroxymethyl derivatives ($-CH_2OH$), and then a condensation reaction of the hydroxymethyl derivatives ($-CH_2-$)- and methylene ether ($-CH_2OCH_2-$) bridged compounds. The textural properties of carbon aerogels obtained were characterized by nitrogen adsorption/desorption analysis and SEM and TEM. The application of the resultant carbon for electrodes of electric double layers capacitor (EDLC) in organic TEABF4/ACN electrolyte indicated that the ESR, as low as 55 $m{\Omega}$, was smaller than for commercially activated carbons. And EDLC with carbon Aerogel electrodes has an excellent stable more than for commercially activated carbons.

• 멤브레인
• /
• 제18권2호
• /
• pp.109-115
• /
• 2008

전도성 활성탄소와 폴리비닐리덴플로라이드(PVDF)를 이용하여 제조된 탄소막을 이용하여 폐수의 Total dissolved Solid (TDS)를 제거할 수 있는 탄소막 시스템을 제조하였다. 100 ppm의 NaCl, $Na_2SO_4,\;MgCl_2,\;MgSO_4$수용액을 이용하여 탄소막의 기본 특성을 알아보았으며, (주)경인양행의 실제폐수인 염료폐수로부터 TDS를 제거하는 실험을 위하여 가로 ${\times}$ 세로가 각각 20cm인 탄소막 240장으로 구성된 Pilot 규모의 탄소막 시스템을 구성하였다. 원폐수를 초순수로 적절히 희석하여 제조된 6가지의 TDS (941, 2050, 2810, 3830, 4960, 6030 ppm)를 지닌 실제폐수를 이용하여 제조된 Pilot규모의 탄소막 시스템의 TDS 제거성능을 알아보았으며, 여러 운전조건에 따른 탄소막 시스템의 분리특성을 알아보았다.

• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.184-193
• /
• 2023

This study investigates the effects of a carbon fiber layer formed on the surface of an etched aluminum current collector on the electrochemical properties of the activated carbon electrodes for an electric double layer capacitor. A particle size analyzer, field-emission SEM, and nitrogen adsorption/desorption isotherm analyzer are employed to analyze the structure of the carbon fiber layer. The electric and electrochemical properties of the activated carbon electrodes using a carbon fiber layer are evaluated using an electrode resistance meter and a charge-discharge tester, respectively. To uniformly coat the surface with carbon fiber, we applied a planetary mill process, adjusted the particle size, and prepared the carbon paste by dispersing in a binder. Subsequently, the carbon paste was coated on the surface of the etched aluminum current collector to form the carbon under layer, after which an activated carbon slurry was coated to form the electrodes. Based on the results, the interface resistance of the EDLC cell made of the current collector with the carbon fiber layer was reduced compared to the cell using the pristine current collector. The interfacial resistance decreased from 0.0143 Ω·cm² to a maximum of 0.0077 Ω·cm². And degradation reactions of the activated carbon electrodes are suppressed in the 3.3 V floating test. We infer that it is because the improved electric network of the carbon fiber layer coated on the current collector surface enhanced the electron collection and interfacial diffusion while protecting the surface of the cathode etched aluminum; thereby suppressing the formation of Al-F compounds.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.697-703
• /
• 2011

축전식 탈염(CDI)은 높은 비표면적을 갖는 전극에 전기화학적 원리로 이온을 흡착하여 제거하는 기술이다. CDI 기술은 낮은 전위에서 작동하기 때문에 에너지 소비가 작고, 전극을 재생할 때 산, 염기 혹은 염을 사용하지 않기 때문에 환경친화적인 기술이다. 본 연구에서 우리는 CDI 기술의 동향을 알아보기 위해 특허와 논문을 조사했다. 데이터베이스는 WIPS와 Scopus를 사용하여 얻었으며 전극기술, 모듈기술 및 응용기술에 따라 조사되었다. CDI의 기술 동향은 연도별, 국가별, 출원인별, 기술별로 조사되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.207.1-207.1
• /
• 2014

High-mobility and two dimensional conduction at the interface between two band insulators, LaAlO3 (LAO) and SrTiO3 (STO), have attracted considerable research interest for both applications and fundamental understanding. Several groups have reported the photoconductivity of LAO/STO, which give us lots of potential development of optoelectronic applications using the oxide interface. Recently, a giant photo response of Pd nano particles/LAO/STO is observed in UV illumination compared with LAO/STO sample. These phenomena have been suggested that the correlation between the interface and the surface states significantly affect local charge modification and resulting electrical transport. Water and gas adsorption/desorption can alter the band alignment and surface workfunction. Therefore, characterizing and manipulating the electric charges in these materials (electrons and ions) are crucial for investigating the physics of metal oxide. Proposed mechanism do not well explain the experimental data in various ambient and there has been no quantitative work to confirm these mechanism. Here, we have investigated UV photo response in various ambient by performing transport and Kelvin probe force microscopy measurements simultaneously. We found that Pd nano particles on LAO can form Schottky contact, it cause interface carrier density and characteristics of persistence photo conductance depending on gas environment. Our studies will help to improve our understanding on the intriguing physical properties providing an important role in many enhanced light sensing and gas sensing applications as a catalytic material in different kinds of metal oxide systems.