• Journal of Haehwa Medicine
• /
• v.20 no.1
• /
• pp.153-160
• /
• 2011

Objective : The objective of this study is to observe the effect of Pharmacopuncture of Anti-inflammatory Herbal compound(AiC) theraphy on elbow pain Methods : The patients diagnosed as lateral epicondylitis and treated mainly with Anti-inflammatory Herbal compound(AiC). After the application of herbal acupuncture, The NRS and ROM of elbow were assessed. Results & conclusion : Symptoms of the patient such as elbow pain and dysfunction were improved after above treatments. so, it is suggested that oriental medical treatment(Pharmacopuncture of Anti-inflammatory Herbal compound(AiC)) is effective on Tennis elbow.

• Smart Structures and Systems
• /
• v.19 no.5
• /
• pp.473-485
• /
• 2017

Ratcheting behavior of $90^{\circ}$ elbow piping subject to internal pressure 20 MPa and reversed bending 20 kN was investigated using experimental method. The maximum ratcheting strain was found in the circumferential direction of intrados. Ratcheting strain at flanks was also very large. Moreover, the effect of temperature on ratcheting strain of $90^{\circ}$ elbow piping was studied through finite element analysis, and the results were compared with room condition ($25^{\circ}$). The results revealed that ratcheting strain of $90^{\circ}$ elbow piping increased with increasing temperature. Ratcheting boundary of $90^{\circ}$ elbow piping was determined by Chaboche model combined with C-TDF method. The results revealed that there was no relationship between the dimensionless form of ratcheting boundary and temperature.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.28-34
• /
• 2003

In the present study, three-dimensional finite element analysis was performed to investigate the effects of internal wall thinning defect on the failure pressure of elbow in the piping system and to develop the failure pressure evaluation model. From the results of finite element analysis, the failure pressure was derived by employing local stress criteria, and the effects of thinning location, bend radius, and defect geometry on the failure pressure of internally wall thinned elbow were investigated. Also, based on these investigations and previous model developed to estimate the failure pressure of elbow with an external pitting defect, the failure pressure evaluation model to be applicable to the elbow containing an internal thinning defect was proposed and compared with the results of finite element analysis. The failure pressure calculated by the model agreed well with the results of finite element analysis.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2092-2099
• /
• 2020

Many damages due to flow-accelerated corrosion and cracking have been observed during recent in-service inspections of nuclear power plants. To determine the operability or repair for damaged pipes, an integrity evaluation related to the damaged piping system should be performed by using already proven code and standards. One of them, the ASME Code Case is most popularly used to integrity assessment in nuclear power plants. However, the recent version of CC N-513 still recommends the simplified method which means a damaged elbow is assumed as an equivalent straight pipe. In addition, to enhance the accuracy integrity assessment in elbow, several previous studies recommend that the SIF and elastic COD values for an elbow with relatively large crack could be predicted by an interpolation technique. However, those estimates for elbow with relatively large crack might be derived to inaccurate results for crack growth analysis, such as for the allowable crack size and life estimation. Therefore, in this paper, the effect of crack length (0.3≤θ₁/π≤0.5) on SIF and elastic COD for elbow is systematically investigated. Then, for large crack in elbow, accurate estimates for SIF and elastic COD, which are widely used to assess the integrity of elbows, are proposed. Those proposed solutions are expected to be the technical basis for revisions of CC N-513-4 through the validation.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.357-360
• /
• 2002

The effect of distance between ninety degree elbow close to upstream face of orifice plate and orifice plate on discharge coefficient was investigated. The distributions of discharge coefficient and differential pressure caused by elbow and short upstream straight length were examined and modified discharge coefficient was introduced. The results presented in this study could be useful when orifice plate is installed under the condition of simple flow disturbance element and short upstream straight length.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 1995.05a
• /
• pp.21-21
• /
• 1995

• Physical Therapy Korea
• /
• v.10 no.3
• /
• pp.91-107
• /
• 2003

We processed meta-analysis to test if the effects of laser therapy and mobilization techniques are evidence-based practice for treating tennis elbow. By researching and collecting the results of previous studies on tennis elbow, we inquired into the difference in the effects of each treatment methods on pain, grip strength, and ROM. A total of 10 international and domestic articles on the treatments of tennis elbow were selected for this study, including 7 articles on the effect of laser therapy and 3 on mobilization techniques. According to the qualitative meta-analysis, all 7 of the articles on laser therapy and 1 of the mobilization technique were double-blinded and randomized the subjects, and all of the 10 studies were designed in a high quality research, using statistics. The results of the studies on laser therapy showed in terms of statistical significance: 4 out of 7 did not decrease pain after therapy, and 3 out of 5 did not increase grip strength after therapy. In the studies on the effects of mobilization technique, both the 2 studies significantly increased grip strength after therapy. For other studies which measured ROM and tension, the mobilization therapy increased ROM significantly, and decreased tension significantly. The results of our study are shown in a diverse form in terms of the effects of different therapy techniques. This is related to the accuracy of the measurement tools for assessments and diagnoses. Further qualitative studies on the evidence-based practice and researches on tennis elbow are needed.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.145-151
• /
• 2006

The objective of this study is to investigate the perceived discomfort for postures combined with shoulder flexion/extension and elbow flexion, and external load. 12 healthy male undergraduate and graduate students participated in this experiment. Experimental variables were the shoulder flexion/extension angle(-20°, 0°, 45°, 90°, 135°), the elbow flexion angle (0°, 45°, 120°), and the external load(0, 1.5Kg, 3Kg) as independent variables and a whole body perceived discomfort using Borg's CR10 as a dependent variable. The subjects maintained the given posture for 60 seconds and then rated the perceived discomfort. The ANOVA results showed that all main factors and two-way interactions were statistically significant at α=0.05. As a result of regression analysis to examine the effect of external load on the perceived discomfort, the perceived discomfort linearly increased as the level of external load increased. Then, the effect of external load on the perceived discomfort was quantitatively classified into three levels based on the result of regression analysis.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.14-19
• /
• 2006

This study performed burst tests using real-scale pipe elbow containing simulated local wall-thinning to evaluate the effects of circumferential thinning angle and bending load on the failure pressure of wall-thinned elbow. The tests were carried out under the loading conditions of internal pressure and combined internal pressure and bending loads. Three circumferential thinning angles, ${\theta}/{\Pi}=0.125,\;0.25,\;0.5$, and different thinning locations, intrados and extrados, were considered. The test results showed that the failure pressure of wall-thinned elbow decreased with increasing circumferential thinning angle for both thinning locations. This tendency is different from that observed in the wall-thinned straight pipe. Also, the failure pressure of intrados wall-thinned elbow was higher than that of extrados wall-thinned elbow with the same thinning depth and equivalent thinning length. In addition, the effect of bending moment on the failure pressure was not obvious.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.117-127
• /
• 2010

The axes of upper forearm coordinate system have been considered as principal axis of each segment which was component of elbow joint. The purpose of this study was to verify whether the mean direction(principal axis) of instantaneous axes of rotation for pure flexion/extension motion coincided with the flexion/extension axis of upper forearm coordinate system. The same procedure was done for pronation/supination motion. Furthermore, it was tested indirectly that there was an interaction effect between the two rotational motions. The results showed that most segment coordinate axes statistically were not consistent with the mean directions of flexion/extension and pronation/supination axes of rotation. From the results, it would be concluded that the ISB coordinate systems was proved to be a little valid for human movement analysis. There also was an effect of pronation/supination angles on flexion/extension motion.