• 전산구조공학
• /
• 제9권1호
• /
• pp.65-76
• /
• 1996

콘크리트의 미세공극 혹은 미세균열의 발생과 성장은 콘크리트의 점차적인 물성 저하를 야기한다. 이와같은 손상은 이방성을 가지며 소성과 함께 콘크리트의 비선형거동을 일으키는 주요원인이 된다. 본 논문은 콘크리트의 탄소성 변형 및 손상을 고려하여 콘크리트의 이방성 손상거동을 해석할 수 있는 콘크리트 연속체 손상모델의 개발에 관한 연구이다. 등가 탄성 에너지원리를 이용하여 이방 손상텐서로 표현된 유효탄성텐서를 구하고, 이를 포함하고 있는 열역학 법칙의 자유에너지함수와 소산포텐셜로부터 손상의 전개법칙을 유도한 후, 손상에너지해방률의 함수로 표현한 손상면을 적용하므로써 콘크리트의 이상성손상을 효율적으로 해석 할 수 있는 구성방정식을 유도하였다. 또한 이방성 손상모델에 콘크리트의 소성모델을 도입시켜 탄소성 변형 및 손상을 함께 고려할 수 있는 콘크리트의 연속체 손상모델을 개발하였다. 개발된 손상모델을 유한요소해석 프로그램에 적용하여 1축 및 2축의 여러 조합응력을 받는 콘크리트 모형을 유한요소해석하였으며, 실험결과 또는 타 모델과의 비교로부터 손상모델의 타당성을 검증하였다.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.185-192
• /
• 2017

In this paper, we reviewed major design parameters for a solid type of deployable antenna and its structural design. We performed modal analysis for a single reflector panel made of aluminum and CFRP (carbon fiber reinforced plastic) to confirm the appropriateness of selected materials. We then predicted the elastic modulus of CFRP using the principles of unidirectional composite elasticity stiffness predictions such as the ROM (Rule of Mixture) and HSR (Hart Smith 10% Rule). To optimize the shape of the antenna reflector, a structural stiffness analysis was performed using derived numerical optimization factors. Six structural stiffness analyses were performed using the constructed experimental design method. The resulting optimal shape conditions are proposed to meet the structural stiffness requirements while minimizing weight.

• 생물환경조절학회지
• /
• 제7권3호
• /
• pp.181-190
• /
• 1998

현재 제주도 서귀포시 제주감귤연구소에서 개발중인 내풍형 2중 아치 비닐하우스에 풍하중을 재하하여 탄성수치해석을 시도한 결과, 풍동실험에 의하면 파풍망의 효과는 풍속이 5∼25m/s 일 때 파풍망을 통과한 유출속도가 86∼98%까지 감소하여 매우 효과적임을 알 수 있었다. 본 연구에서는 일반적으로 사용하고 있는 파이프를 지반에 고정시키는 경계조건을 주지 않고 설치한 피라미드형 콘크리트 지지대의 사하중을 지점에 재하하여 경계조건을 준 결과, 하우스가 풍하중의 양력에 의하여 위로 들리는 거동을 나타내고 있었다. 이러한 거동은 현장에서 목격되는 파괴형상이 기초 전체가 인발되고 파이프가 콘크리트 기초로부터 인발됨으로써 야기되는 파괴요인이 된다. 본 연구에서 재하한 45m/s의 풍하중은 재현기간이 100년에 대한 값으로 반영구적인 구조물에 기준으로 비닐하우스의 내구수명이 상대적으로 짧으므로 이 풍하중을 감소시켜서 설계할 수 있었다. 또한 본 연구에서는 지붕아치가 연결되는 Y-형 접속장치를 내부힌지로 모델링한 것을 제외하고는 모든 연결을 고정연결로 보아 해석하였다.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.111-120
• /
• 1986

강재(鋼材) 뼈대 구조물(構造物)은 널리 사용(使用)되는 기본적(基本的)인 구조물(構造物)로서, 소성(塑性)힌지의 개념(槪念)을 도입(導入)한 설계(設計) 및 해석방법(解析方法)이 적절(適切)히 적용(適用)되고 있는 경우(境遇)라고 볼 수 있다. 소성해석(塑性解析)의 목적(目的)은 구조물(構造物) 각(各) 부재(部材)의 소성(塑性)모멘트를 알고 있을 때 붕괴하중(崩壞荷重)을 결정(決定)하는 것이며, 소성최적설계(塑性最適設計)의 목적(目的)은 구조물(構造物)의 총중량(總重量)을 최소(最小)로 하는 부도재(部都材)의 소성(塑性)모멘트를 결정(決定)하는 것이다. 본(本) 논문(論文)에서는 소성해석(塑性解析) 및 최적설계(最適設計)를 정적접근방법(靜的接近方法)(static approach)을 사용(使用)하여 Simplex method에 의해 해결(解決)하였다. 소성해석(塑性解析)의 경우(境遇), 종래(從來)의 계산시간(計算時間)을 훨씬 줄일 수 있었으며, 또한 본(本) 연구(硏究)에서 2층 구조물(構造物)의 최적설계시(最適設計時) 구조물(構造物)의 중량(重量)은 탄성설계(彈性設計)와 비교(比較)하여 약(約) 24%가 절약(節約)되었다.

• Structural Engineering and Mechanics
• /
• 제9권4호
• /
• pp.349-364
• /
• 2000

This paper aims to make a contribution to understanding which methods apply for structural analysis of beams prestressed with FRP cables. A parametric non-linear numerical analysis of simply supported beams has been performed. In this analysis the shape of the cross-section, the strength of concrete, the material adopted for the cables (steel, GFRP, CFRP), the prestressing system (bonded or unbonded prestressing) and the degree of prestressing were changed to collect a broad range of data which, the author contends, should cover the most frequent types of common practice. The output data themselves and their comparison allow us to suggest some rules that could be adopted when dealing with beams prestressed with these innovatory materials that have an elastic-brittle behaviour.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.583-591
• /
• 2005

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion of the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact. Hence, for more rational and safe design of ship structures, it is of crucial importance to bitter understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.568-575
• /
• 2006

The present paper provides plastic limit load solutions of axial and circumferential through-wall cracked pipes based on detailed three-dimensional (3-D) finite element (FE) limit analysis using elastic-perfectly-plastic behavior. As a loading condition, axial tension, global bending moment, internal pressure, combined tension and bending and combined internal pressure and bending are considered for circumferential through-wall cracked pipes, while only internal pressure is considered for axial through-wall cracked pipes. Especially, more emphasis is given for through-wall cracked pipes subject to combined loading. Comparisons with existing solutions show a large discrepancy in short through-wall crack (both axial and circumferential) for internal pressure. In the case of combined loading, the FE limit analyses results show thickness effect on limit load solutions. Furthermore, the plastic limit load solution for circumferential through-wall cracked pipes under bending is applied to derive plastic $\eta\;and\;{\gamma}$-factor of testing circumferential through-wall cracked pipes to estimate fracture toughness. Being based on detailed 3-D FE limit analysis, the present solutions are believed to be meaningful fur structural integrity assessment of through-wall cracked pipes.

• Structural Engineering and Mechanics
• /
• 제6권1호
• /
• pp.95-113
• /
• 1998

The extensive use of honeycomb sandwich structures has led to the need to understand and analyze their low velocity impact response. Commercially available finite element software provides a possible analysis tool for this type of problem, but the validity of their material properties models for honeycomb materials must be investigated. Three different problems that focus on the effect of differences in honeycomb material properties on static and dynamic response are presented and discussed. The first problem considered is a linear elastic static analysis of honeycomb sandwich beams. The second is a nonlinear elastic-plastic analysis of a circular honeycomb sandwich plate. The final problem is a dynamic analysis of circular honeycomb sandwich plates impacted by low velocity projectiles. Results are obtained using the ABAQUS final element code and compared against experimental results. The comparison indicates that currently available material properties models for honeycomb materials can be used to obtain a good approximation of the behavior of honeycomb sandwich structures under static and dynamic loading conditions.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1726-1746
• /
• 2022

This paper presents fracture mechanics analysis results for various cracks located at pressurized water reactor pressure vessel nozzle crotch corners taking into consideration constraint effect. Technical documents such as the ASME B&PV Code, Sec.XI were reviewed and then a fracture mechanics analysis procedure was proposed for structural integrity assessment of various nozzle crotch corner cracks under normal operation conditions considering the constraint effect. Linear elastic fracture mechanics analysis was performed by conducting finite element analysis with the proposed analysis procedure. Based on the evaluation results, elastic-plastic fracture mechanics analysis taking into account the constraint effect was performed only for the axial surface crack of the reactor pressure vessel outlet nozzle with cladding. The fracture mechanics analysis result shows that only the axial surface crack in the reactor pressure vessel outlet nozzle has the stress intensity factor exceeding the low bound of upper-shelf fracture toughness irrespectively of considering the constraint effect. It is confirmed that the J-integral for the axial crack of the outlet nozzle does not exceed the ductile crack initiation toughness. Hence, it can be ensured that the structural integrity of all the cracks is maintained during the normal operation.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.101-110
• /
• 2012

This paper focuses on the finite element (FE) response sensitivity and reliability analyses considering smooth constitutive material models. A reinforced concrete frame is modeled for FE sensitivity analysis followed by direct differentiation method under both static and dynamic load cases. Later, the reliability analysis is performed to predict the seismic behavior of the frame. Displacement sensitivity discontinuities are observed along the pseudo-time axis using non-smooth concrete and reinforcing steel model under quasi-static loading. However, the smooth materials show continuity in response sensitivity at elastic to plastic transition points. The normalized sensitivity results are also used to measure the relative importance of the material parameters on the structural responses. In FE reliability analysis, the influence of smoothness behavior of reinforcing steel is carefully noticed. More efficient and reasonable reliability estimation can be achieved by using smooth material model compare with bilinear material constitutive model.