• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.169-173
• /
• 2007

During laser irradiation, mechanically deformed cartilage undergoes a temperature dependent phase transformation resulting in accelerated stress relaxation. Clinically, laser-assisted cartilage reshaping may be used to recreate the underlying cartilaginous framework in structures such as ear, larynx, trachea, and nose. Therefore, research and identification of the biophysical transformations in cartilage accompanying laser heating are valuable to identify critical laser dosimetry and phase transformation of cartilage for many clinical applications. quasi-elastic light scattering was investigated using Ho : YAG laser $(\lambda=2.12{\mu}m\;;\;t_p\sim450{\mu}s)$ and Nd:YAG Laser $(\lambda=1.32{\mu}m\;;\;t_p\sim700{\mu}s)$ for heating sources and He : Ne $(\lambda=632.8nm)$ laser, high-power diode pumped laser $(\lambda=532nm)$, and Ti : $Al_2O_3$ femtosecond laser $(\lambda=850nm)$ for light scattering sources. A spectrometer and infrared radiometric sensor were used to monitor the backscattered light spectrum and transient temperature changes from cartilage following laser irradiation. Analysis of the optical, thermal, and quasi-elastic light scattering properties may indicate internal dynamics of proteoglycan movement within the cartilage framework during laser irradiation.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.113-123
• /
• 1997

The welding residual stresses produced by welding frequently cause a crack and promote stress corrosion etc. in heat affected zone contained with external load and weakness of material. For the purpose pof relaxation of welding residual stress, post welding heat teratment(PWHT) is widely used. In this paper, the computer program which is based on Thermal-Elasto-plastic-creep theory for plane deformation on developed by finite element method (F.E.M) and verified its propriety by experimental measurement and also by using the developed computer program. The mechanical behavior of butt welding joint is clairfied during PWHT.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.496-499
• /
• 2006

In this study, a practical method of shrinkage stress analysis on concrete slab in multi-story building is proposed, which considers both internal restraint and external restraint variation resulting from construction sequence. The shrinkage stress due to external restraint is obtained by multiplying relaxation coefficient to elastic shrinkage stress. The additional shrinkage stress due to internal restraint is obtained by residual strain of the elastic analysis. A verification example was analyzed and compared by the proposed method and commercial analysis program that is capable of time-dependent analysis of concrete. The results of 10-story example building show that the internal restraint of reinforcement increases the shrinkage stress considerably at the slabs under loose external restraint.

• 한국항공우주학회지
• /
• 제31권10호
• /
• pp.73-78
• /
• 2003

항공우주 분야의 MEMS 기술의 중요성은 경량화 및 높은 분해능 등의 목적아래 점차 증가하고 있는 추세이다. 따라서 MEMS 기기의 제작에 있어 박막 물성의 조사 및 개선 방안은 중요한 논점이 되고 있으며, 박막의 잔류응력은 MEMS 기기 제작 및 구동에 있어 해결해야 할 중요한 문제점으로 남았있다. 따라서 본 논문에서는 MEMS 기기의 구조제로 많이 쓰이는 LPCVD 다결정 실리콘에 He+, Ar+ 이온을 주입함으로써 응력 구배를 완화하였다. 또한 Nano-indenter를 이용한 CSM 방법을 사용하여, 다결정 실리콘의 탄성계수와 경도를 압입 깊이에 따라 측정하였다. 그 결과, 이온 주입에 의한 결정성의 변화가 탄성계수와 경도를 감소시키지만, 이온 농도가 증가함에 따라 탄성계수와 경도가 증가하는 현상을 관찰하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.290-296
• /
• 2005

The contour method is based on the elastic superposition principle, and relies on deformations that occur when a residually stressed part is cut along a plane. During the cut, the part is constrained at a location along the cut so that deformations are restrained as much as possible. The displacement is applied to an elastic FE model of the half. When plasticity is involved in the relaxation process, the superposition principle is no longer valid, and stress error in the resulting measurement of residual stress would be caused. Residual stress states in a laser peened Ti-6Al-4V strip were taken for the FE simulation.

• 소성∙가공
• /
• 제22권4호
• /
• pp.216-222
• /
• 2013

Solid polymers exhibit rate-dependent deformation behavior such as nonlinear strain rate sensitivity and stress relaxation like metallic materials. Despite the different microstructures of polymeric and metallic materials, they have common properties with respect to inelastic deformation. Unlike most metallic materials, solid polymers and shape memory alloys (SMAs) exhibit highly nonlinear stress-strain behavior upon unloading. The present work employs the viscoplasticity theory [K. Ho, 2011, Trans. Mater. Process. 20, 350-356] developed for the pseudoelastic behavior of SMAs, which is based on unified state variable theory for the rate-dependent inelastic deformation behavior of typical metallic materials, to depict the curved unloading behavior of polyphenylene oxide (PPO). The constitutive equations are characterized by the evolution laws of two state variables that are related to the elastic modulus and the back stress. The simulation results are compared with the experimental data obtained by Krempl and Khan [2003, Int. J. Plasticity 19, 1069-1095].

• Steel and Composite Structures
• /
• 제13권6호
• /
• pp.539-560
• /
• 2012

This study uses an explicit numerical algorithm to evaluate the ultimate load capacity analysis of a unit Strarch frame, accounting for the initial imperfection effects of the stress-erection process. Displacement-based filament beam element and an explicit dynamic relaxation method with kinetic damping are used to achieve the analysis. The section is composed of the finite number of filaments that can be conveniently modeled by various material models. Ramberg-Osgood and bilinear kinematic elastic plastic material models are formulated to analyze the nonlinear material behaviors of filaments. The numerical results obtained in the present study are compared with the results of experiment for stress-erection and buckling of unit Strarch frames.

• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.566-594
• /
• 2000

In most LMFBR(Liquid Metal Fast Breed Reactor) design, the operating temperature is very high and the time-dependent creep and stress-rupture effects become so important in reactor structural design. Therefore, unlike with conventional PWR, the normal operating conditions can be basically dominant design loading because the hold time at elevated temperature condition is so long and enough to result in severe total creep ratcheting strains during total service lifetime. In this paper, elevated temperature design of the conceptually designed baffle annulus regions of KALIMER(Korea Advanced Liquid MEtal Reactor) reactor internal strictures is carried out for normal operating conditions which have the operating temperature 53$0^{\circ}C$ and the total service lifetime of 30 years. For the elevated temperature design of reactor internal structures, the ASME Code Case N-201-4 is used. Using this code, the time-dependent stress limits, the accumulated total inelastic strain during service lifetime, and the creep-fatigue damages are evaluated with the calculation results by the elastic analysis under conservative assumptions. The application procedures of elevated temperature design of the reactor internal structures using ASME Code Case N-201-4 with the elastic analysis method are described step by step in detail. This paper will be useful guide for actual application of elevated temperature design of various reactor types accounting for creep and stress-rupture effects.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.759-768
• /
• 2012

본 논문은 이차하중을 받는 고온 구조물의 $C(t)$-적분 예측을 위한 탄성추종 계수를 결정하는 기법을 제시한다. 이차하중을 받는 구조물의 과도 크리프 상태의 크리프 균열 진전률은 $C(t)$를 이용하여 정량화할 수 있다. 이차하중을 받는 구조물에서 발생할 수 있는 탄성추종 현상은 응력 완화를 방해하므로, 탄성추종 현상이 증가하면 $C(t)$와 크리프 균열 진전률이 증가한다. Ainsworth 와 Dean 은 참조응력법에 기반하여 $C(t)$ 예측식을 제시하였는데, 이 식을 계산하기 위해서는 탄성추종 계수가 필요하다. 본 연구에서 고온 균열 구조물의 크리프에 의한 탄성추종 계수를 결정하는 방법을 제시하였다. 소성-크리프 유사성을 이용하여 탄소성 유한요소해석으로 크리프 탄성추종 계수를 결정할 수 있다. 유한요소해석을 이용하여 이 탄성추종 계수 결정법을 검증하였다.

• 한국식품과학회지
• /
• 제26권2호
• /
• pp.103-109
• /
• 1994

응력완화 현상을 측정하여 생선단백질 겔의 선형적 점탄성과 열처리 공정에 따른 물성의 변화를 수식적 모델로 분석하였다. 생선단백질 겔은 정변형도 $0.105{\sim}0.693$, 압축속도 $50{\sim}250\;mm/min$의 범위에서 선형적 점탄성을 나타내었으며, generalized Maxwell 모형에 의해 분석한 결과, 압축변형도과 압축속도가 증가함에 따라 가열에 의해 형성된 내부조직 중 탄성 성분의 증가와 점성성분의 감소현상을 보였다. $4^{\circ}C$와 $40^{\circ}C$에서 전처리하여 $90^{\circ}C$에서 제조한 겔은 전처리 없이 $90^{\circ}C$에서 직접 열처리한 겔보다 탄성율(E) 및 평형탄성율$(E_e)$이 높았으나, 점성성분$({\eta})$은 적용된 모델에 따라서 그 값의 차이가 나타났다. 따라서 식품의 물성을 측정하는데 있어서 두 수학적 모델의 접근방법 및 정확도에 대하여 설명하였다.