• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.579-587
• /
• 2019

In this paper, pounding tuned mass dampers (PTMDs) were designed to mitigate the multi-mode vortex-induced vibration (VIV) of stay cable utilizing the viscous-elastic material's energy-dissipated ability. The PTMD device consists of a cantilever metal rod beam, a metal mass block and a specially designed damping element covered with viscous-elastic material layer. Wind-tunnel experiment on VIV of stay cable model was set up to validate the effectiveness of the PTMD on multi-mode VIV mitigation of stay cable. By analyzing and comparing testing results of all testing cases, it could be verified that the PTMD with viscous-elastic pounding boundary can obviously mitigate the VIV amplitude of the stay cable. Moreover, the installed location and the design parameters of the PTMD device based on the controlled modes of the primary stay cable, would have a certain extent suppression on the other modal vibration of the stay cable, which means that the designed PTMDs are effective among a large band of frequency for the multi-mode VIV control of the stay cable.

• 대한원격탐사학회지
• /
• 제39권5_1호
• /
• pp.669-681
• /
• 2023

과일 나무의 생육을 평가하는 중요한 지표인 엽록소 함량을 추정하는데 비교적 많은 노동력의 투입이 요구되고 오랜 시간이 소요되는 기존의 파괴 조사 대신 비파괴적 조사 방식인 원격탐사기술을 적용하기 위한 연구가 시도되고 있다. 이 연구에서는 2년(2021, 2022) 간 무인기 기반의 초분광 영상을 이용하여 배나무 잎의 엽록소 함량을 비파괴적으로 추정하는 연구를 수행하였다. 영상 처리로 추출된 배나무 캐노피(canopy)의 단일 band 반사율은 시간 변화에 따라 불안정한 복사 효과를 최소화하기 위해 밴드비화(band rationing) 되었다. 밴드비(band ratios)를 입력 변수로 머신러닝 알고리즘인 elastic-net, k-nearest neighbors (KNN)과 support vector machine을 사용하여 추정(calibration, validation) 모델들을 개발하였다. Full band ratios 기반 추정 모델들의 성능과 비교하여 계산 비용 절감과 재현성 향상에 유리한 key band ratios를 선정하였다. 결과적으로 모든 머신러닝 모델에서 full band ratios를 이용한 calibration에 coefficient of determination (R²)≥0.67, root mean squared error (RMSE)≤1.22 ㎍/cm², relative error (RE)≤17.9%)와 validation에 R²≥0.56, RMSE≤1.41 ㎍/cm², RE≤20.7% 성능을 비교하였을 때, key band ratios 네 개가 선정되었다. 머신러닝 모델들 사이에 validation 성능에는 비교적 큰 차이가 없어 calibration 성능이 가장 높았던 KNN 모델을 기준으로 삼았으며, 그 key band ratios는 710/714, 718/722, 754/758, 758/762 nm가 선정되었다. Calibration에서 R²=0.80, RMSE=0.94 ㎍/cm², RE=13.9%와 validation에서 R²=0.57, RMSE=1.40 ㎍/cm², RE=20.5%를 나타내었다. Validation의 기준으로 한 성능 결과는 배나무 잎 엽록소 함량을 추정하기에 충분하지 않았지만, 앞으로의 연구에 기준이 될 key band ratios를 선정했다는 것에 의미가 있다. 추후 연구에서는 추정 성능을 향상하기 위해 지속적으로 추가 데이터세트를 확보하여 선정된 key band ratios의 신뢰성 검증과 함께 실제 과원에 재현 가능한 추정 모델로 고도화할 필요가 있다.

• 한국콘텐츠학회논문지
• /
• 제9권11호
• /
• pp.391-398
• /
• 2009

본 연구는 활성산소의 산화적 스트레스를 억제하는데 관여하는 항산화 효소계를 강화시키는 운동의 효과를 검증하고자 실시하였다. 이를 위해, 65세 이상 노인 여성 12명을 대상으로 12주간 포크댄스를 통한 유산소성 운동(HRmax 50-60% 수준, 주 2회, 60분)과 탄력밴드를 이용한 근 저항성 운동(주 2회 60분)을 실시하여 혈중 MDA 및 항산화 효소인 SOD, GPx 활성도를 살펴보았다. 그 결과 규칙적인 유산소운동을 병행한 근 저항성 운동이 항산화 효소인 SOD와 GPx의 활성도를 복합운동 전에 비해 운동 후에 유의하게 증가하는 것으로 나타났다. 이러한 결과로 볼 때 유산소운동을 병행한 근 저항성 운동인 복합운동은 노인들의 항산화 효소를 활성화시켜 항산화계의 강화에 기여하는 것으로 확인되었다.

• 한국재료학회지
• /
• 제10권2호
• /
• pp.155-159
• /
• 2000

고주기 피로조건에서 응력진폭은 항복점이하의 응력이므로 변형은 일반적으로 탄성적이다. 만약 변형이 완전히 탄성적이라면 피로는 생겨나지 않을 것이다. 그러나 이는 항복점의 개념과 항복점 아래에서의 순수탄성변형의 가정을 과도하게 단순화한 것이다. 인장실험 시 시편 전체가 파괴 절차를 따르는 반면, 고주기 피로실험에서는 국부적 영구 슬립띠가 파괴절차를 따른다. 그러나 두 경우에서 파괴 전변형영역의 단위체적 당 변형의 축적은 두 재료가 동일하기 때문에 국부적으로 동일하다. 미소 소성변형이나 Luders band, 탄성영역에서의 인장실험곡선의 기울기변화는 재료속에 포함된 경도가 높은 침입형 또는 침탄형 원자의 구름에 기인한다. 이들이 구름운동(Rolling movement)을 일으켜 다음 격자로 이동하면 소성변형이 발생되는 반면, 완전히 구르지 못하고 제자리로 되돌아오는 운동을 반복하는 경우가 바로 피로한계인다.

• 한국보건간호학회지
• /
• 제28권2호
• /
• pp.310-319
• /
• 2014

Purpose: The purpose of this study is to examine the effects of a resistance band training program on body composition, physical fitness, and health promotion behavior in nursing students. Method: This study has a one-group pretest-posttest design to examine the change in body composition, physical fitness, and health-promoting lifestyle profile after participation in the resistance band training program. Training consisted of hands-based exercises using an elastic resistance band for ten weeks. Participants performed the resistance band training two days per week with a sports trainer, and 30 minutes self-training three days per week. The participants were 21 freshmen in nursing. Results: Mean age of the participants was 20.9 years, and 61.9% were not satisfied with their body shape. After the training program, muscle mass, muscular endurance, and balance of the body were significantly improved. In health promoting lifestyle profile, categories of physical activity, health responsibility, and stress management showed a significant increase. Conclusion: Results of this study suggested that exercising with a resistance band improved body composition, physical fitness, and health promoting behavior in the nursing students. We propose that resistance band training should be suitable for those who have the environment with limitation of time and space.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.295-300
• /
• 2021

This study investigated the dominant frequency of the elastic waves from the tensile test. The specimen was rolled with five different rolling degrees (10, 22, 33, 42 and 50%), which was treated subzero. The specimen was rolled at room temperature, which was transformed from austenite to martensite (only α'-martensite). The dominant frequency increased with an increase in the rolling degree regardless of the subzero temperature, and decreased after 33% of the rolling degree. On the other hand, higher frequency band was obtained at lower temperature and long time. The dominant frequency increased when the amount of α'-martensite increased and decreased with the α'-martensite amount between 50-65%. The lower subzero treatment temperature increased the amount of α'-martensite, which resulted in the higher dominant frequency. The longer treatment time at the same subzero temperature led to an increase in the amount of α'-martensite, leading to high dominant frequency.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2178-2188
• /
• 2006

The stress collapse in the formation of shear bands in elasto-thermo-viscoplatic materials is systematically studied within the framework of one-dimensional formulation via analytical and numerical methods. The elastic energy released in a domain is found to play an important role in the collapse behavior of shear localization. A non-dimensional parameter named the stability indicator is introduced to characterize the collapse behavior, with approximate forms of the incremental governing equations. The stability indicator offers useful information regarding the degree of severity of an abrupt change of deformations during the stress collapse. Numerical experiments are carried out to verify the stability indicator by varying material properties.

• 한국산업융합학회 논문집
• /
• 제10권2호
• /
• pp.81-88
• /
• 2007

In case of an urban tunnel, the displacement of ground base controls the tunnel design because it is built on shallow and unconsolidated ground many times. There are more insufficiency to describe the ground movement which coincides in the measured result of the situ because the design of an urban tunnel is dependent on the method of numerical analysis used to the existing elastic and elasto-plastic models. We studied about the prediction for the ground movement of a shallow tunnel in unconsolidated ground, mechanism of collapse, and settlement. Also this paper shows comparison with the existing elastic and elasto-plastic model using the unlinear analysis of the strain-softening model. We can model the real ground movement as the increasement of ground surface inclination or occurrence of shear band by using strain-softening model for the result of ground movement of an urban NATM tunnel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1142-1144
• /
• 1999

A 4-beam cross type silicon elastic body was fabricated for the electromagnetic type vibration micro transducer. To improve energy transfer efficiency, the structure and size of vibration transducer were optimized by the FEA simulation package. Experimental results of the fabricated transducer shows $0.5{\sim}8$ dyne of vibration force at the condition of $1{\sim}4$ mA of current source $100{\sim}7000$ Hz of frequency band width. These results presented the useful applications for micro actuators and sensors.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.90-94
• /
• 2002

In this paper, Compression in the case where dissimilar blocks are twinned variously are carried out in the condition of lubricated interface. The degree of growth is experimentally investigated. Moreover, numerical simulations are carried out by the elastic-plastic FEM for the case of the dissimilar blocks with the initial sawtooth angle of 60。. The dissimilar blocks are twinned, larger difference between material properties leads smaller growth, and the degreased interface leads smaller growth than that in the lubricated one. Furthermore, by the simulation of compression where dissimilar blocks are twinned, it is confirmed that the tendency of the general deformation pattern is very similar to the experiment.