• The Journal of Korean Medicine
• /
• v.31 no.4
• /
• pp.151-163
• /
• 2010

Objective: We investigated the oral malodor inhibitory effect of Scutellariae Radix (SR), Phellodendri Cortex (PC), Moutan Cortex (MTC) and Magnoliae Cortex (MGC) for the development of a gargle solution. Methods: 1. Against P. gingivalis and Pr. intermedia, the minimal bactericidal concentration (MBC) and the change of viable cells that were exposed to 1% each herbal extract were observed. 2. Deodorizing activity of 2% herbal extract and Garglin $Mint^{(R)}$ against methyl mercaptan were evaluated by gas chromatography (GC). 3. We used the salivary sediment system (SSS) as the malodor model. 4. The clinical examination was repeated 3 times by 2 subjects by $Halimeter^{(R)}$. Baseline VSC of each subject was measured. Then, the control subject gargled with cysteine for 30 sec. After 4 min, subjects would gargle for 30 seconds with herbal extracts (2%) and Garglin $Mint^{(R)}$. Subsequently, the concentration of VSC was measured at 0, 4, 8, 12, 16, 20, 40 and 60 minutes. Results: 1. Against P. gingivalis, MBC of SR, PC and MTC was 0.1%, and MBC of MGC was 1%. Removal time of P. gingivalis was as follows; 5 hr in MGC, 24 hr in SR and PC, and 48 hr in MTC. Against Pr. intermedia, MBC of SR and PC was 0.5%, and MBC of MTC, MGC was 1%. Removal time of Pr. intermedia was as follows; 5 hr in MTC and 24 hr in SR, PC and MGC. 2. Deodorizing effect of herbal extracts against methyl mercaptan was as follows; MGC and MTC had 100%, SR had 82.22%, PC had 66.60%, Garglin $Mint^{(R)}$ had 40.54%. 3. In the experiment using SSS, PC and MTC had statistically significant malodor-inhibitory effects (p<.05). 4. In the clinical examination, PC and MGC had statistically significant inhibitory effects at every elapsed time compared to the control subject. MTC had that until 40 min. SR had that at 0, 4, 8, 20, and 60 min. Conclusions: SR, PC, MTC and MGC have an antibacterial effect and the chemical removable activity of the oral malodor caused by VSC. These four herbs could have potential as effective anti-malodor agents.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1719-1729
• /
• 1994

In this paper, an adaptive CAC(Connection Admission Control) method is proposed. The adaptive CAC uses traffic estimates derived from both traffic parameter specified by user and cell flow measurements. Traffic estimation using user-specified parameters is performed at every moment of connection request or connection release by recursive formula which makes real-time calculation possible. Traffic estimation using cell flow measurement is carried out when the number of connected calls does not change during a measurement reflection period-renewal period. The most import ant thing for the traffic estimation using cell flow measurement is the determination of the length of a renewal period to trace a real traffic flow with an allowable time lag and the measurement reflection ratio(MRR) both to reduce the portion of overestimation and to avoid underestimation of real traffic flow. To solve these problems, the adaptive CAC updates renewal period and MRR adaptively according to the number of connections and the elapsed time after last connection or release respectively. Performance analysis for the proposed method is evaluated in several aspects for the cases of both homogeneous and heterogeneous bursty traffic. Numerical examples show the adaptive CAC method has the better performance compared with conventional CAC method based on burst model from the both utilization and QOS point of view.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.17-28
• /
• 2012

It is known that thermo-mechanical properties of solder material and molding compound in WB-PBGA packages are considerably affected by not only temperature but elapsed time. In this paper, finite element analysis (FEA) taking material nonlinearity into account was performed for more reliable prediction on deformation behavior of a lead-free WB-PBGA package, and the results were compared with experimental results from moire interferometry. Prior to FEA on the WB-PBGA package, it was carried out for two material layers consisting of molding compound and substrate in terms of temperature and time-dependent viscoelastic effects of molding compound. Reliable deformation analysis for temperature change was then accomplished using viscoplastic properties for solder ball and viscoelastic properties for molding compound, and the analysis was also verified with experimental results. The result showed that the deformation of WB-PBGA packages was strongly dependent on material model of molding compound; thus, temperature and time-dependent viscoelastic behavior must be considered for the molding compound analysis. In addition, viscoelastic properties of B-type molding compound having comparatively high glass transition temperature of $135^{\circ}C$ could be recommended for reliable prediction on deformation of SAC lead-free WB-PBGA packages.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.183-190
• /
• 1995

Various factors such as sampling height in the chamber, sampling interval, sampling time at daytime and the effects of pedoturbation on methane emission during chamber installation were evaluated using a simplified closed static chamber method to measure methane flux in paddy soils. Sampling height of the chamber for representative samples was 65cm. An additional DC fan was required to attain an even methane gradient in the chamber. Considering the change of methane concentration and air temperature in the chamber, sampling is recommended to finish within 30 minutes after starting sampling. The aim of setting DC fan in the chamber was to get the thermal equilibrium in the chamber as well as the representative samples. Suitable time to collect the gas samples representing the day's methane flux was 0900~1200 hours. Gas sampling was possible even after installation of small chambers if the elapsed time was more than 6 hours and supporting stand would be to be added to minimize pedoturbation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.73-80
• /
• 2022

This study evaluated changes in fluidity and rheological properties over time for 3D printed composite materials, and evaluated compressive strength and splitting tensile strength properties for laminated and molded specimens. The composite material for 3D printing starts to change rapidly after 30 minutes of extrusion, and the viscosity of the material tends to be maintained up to 90 minutes, but it was confirmed that construction within 60 minutes after mixing is effective. The compressive strength of the laminated test specimen showed equivalent or better performance at all ages compared to the molded test specimen. In the stress-strain curve of the laminated specimen, the initial slope was similar to that of the molded specimen, but the descending slope was on average 1.9 times higher than that of the molded specimen, indicating relatively brittle behavior. The splitting tensile strength of the P-V laminated specimen was about 6% lower than that of the molded specimen. It is judged that this is because the interfacial adhesion force against the vertical load is affected by the pattern direction of the laminated test specimen.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.5
• /
• pp.302-312
• /
• 2022

The purpose of this study was to investigate the Maillard reaction-related physicochemical properties of three maize varieties (Kwangpyeongok, Sinhwangok2ho and Gangdaok) after roasting them for different times (0, 15, 25, 40, and 55 minutes). The Maillard reaction is a non-enzymatic browning reaction involving reducing sugars and amino compounds. The content of reducing sugar, the causative agent of the Maillard reaction, decreased as roasting time increased. Gangdaok showed the lowest reducing sugar content of 1.04 mg/g after 55 minutes of roasting. In the elapsed roasting time, chromaticity 'L' and 'b' values decreased. At 55 minutes of roasting, wherein the Maillard reaction occurred most actively, Gangdaok showed the lowest 'L' value of 56.37 and the highest 'a' value of 7.60. Gangdaok had superior conditions for inducing the Maillard reaction compared to other varieties, and it is consider that 'flint-type', an endosperm characteristic, may have been the influencing agent. This study detected a total of 52 types of volatile aroma compounds (VACs), of which 28 were produced after roasting. Of the total VACs detected, 2-Formyl-5-methylfuran and 2-Furancarboxaldehyde accounted for 43.8~45.5% and have been confirmed to be the major VACs present in roasted maize. Most of the correlations between the Maillard reaction-related characteristics showed high correlation coefficients.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.650-658
• /
• 2010

We used green manure crops such as hairy vetch, crimson clover, rye, sorghum, and sudan grass by mixing with soils to assess the effects of green manure crops on nutrient supply and soil quality improvement. Temporal changes in soil inorganic nitrogen, carbohydrate, microbial biomass, and humus content were determined as soil quality indicators. Inorganic nitrogen content of the control maintained similar level during the whole period, but it had continually increased until 4 weeks after incorporation (WAI) of green manure crops. Especially, inorganic nitrogen content sharply increased in sudan grass. After incorporation of green manure crops, temporal change of soluble sugar in soils was as follows: it had gradually increased in legume green manure crops-incorporated soils until 7 WAI, which was the highest, and then showed the tendency to be reduced. Meanwhile, it in non-legume green manure crops-incorporated soils rapidly increased after the incorporation, and reached the maximum around 4 WAI. Humic acid by the decomposition of crop residues in green manure crops-incorporated soils was greatly enhanced with the elapsed time of 4 WAI, although it was low at the same level as the control until 2 weeks. In addition, there was a difference in fulvic acid by incorporated crops, fulvic acid in hairy vetch, sorghum and sudan grass showed a similar tendency with the change in humic acid. Our results suggest that soluble sugar, microbial activity and humic acid could be available indicators to evaluate the fertility of green manure crops-incorporated soils.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.114-120
• /
• 2007

The augmentation of soft tissue defects is one of the critical problems in the oral and maxillofacial surgery. Various types of graft materials, both autologous and non-autologous, have been used for the augmentation of soft tissue in the facial region. However, it is not easy to choose an ideal material for soft tissue augmentation because each has its advantages and disadvantages. An ideal graft material should meet the following criteria : it should not leave a scar at the area from which it was taken; should have less likelihood of causing infection; should feel natural after implanted; and should be not absorbed. Among the materials meeting these criteria, human dermis and artificial dermis are commonly used for clinical purposes. The present study was aimed to investigate and compare the resorption rate and the histological change following the use of the autologous dermis, the human homogenous dermis $Alloderm^{(R)}$, and the artificial dermis $Terudermis^{(R)}$ to reconstruct the soft tissue defect. Twenty mature rabbits of either sex, weighing about 2 ㎏, were used. Each rabbit was transplanted with the autologous dermis, $Alloderm^{(R)}$, and $Terudermis^{(R)}$ size $1{\times}1-cm$ at the space between the external abdominal oblique muscle and the external abdominal oblique fascia. They were then divided into 4 groups (n=5 each) according to the time elapsed after the surgery: 1, 2, 4, and 8 weeks. The resorption rate was calculated by measuring the volume change before and after the transplantation, and H-E stain was preformed to observe the histological changes. The resorption rate after 8 weeks was 21.5% for the autologous dermis, 16.0% $Alloderm^{(R)}$, and 36.4% $Terudermis^{(R)}$, suggesting that $Alloderm^{(R)}$ is the most stable while $Terudermis^{(R)}$ is the most unstable. In microscopic examinations, the autologous dermis graft was surrounded by inflammatory cells and showed foreign body reactions. The epidermal inclusion cyst was observed in the autologous dermis graft. $Terudermis^{(R)}$ and $Alloderm^{(R)}$ demonstrated neovascularization and the progressive growth of new fibroblast. The results suggest that $Terudermis^{(R)}$ and $Alloderm^{(R)}$ can be availably for substituting the autologous dermis.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.253-263
• /
• 2022

This study suggests a guideline for designing unit process of wastewater reuse in terms of a maintenance of the process based on critical parameters to draw a high quality performance of RO unit. Defining the parameters was done by applying membrane integrity test (MIT) in pretreatment process utilizing lab-scale MF. SDI is utilized for judging whether permeate is suitable to RO unit. However, result said TOC concentration matching with particle count analysis is better for judging the permeate condition. When membrane test pressure (P_test) was measured to derive log removal value in PDT, virgin state of membrane fiber was used to measure dynamic contact angle utilizing surface tension of the membrane fiber. Actually, foulant affects to the state of membrane surface, and it decreases the P_test value along with time elapsed. Consequently, LRV_DIT is also affected by P_test value. Thus, sensitivity of direct integrity test descends with result of P_test value change, so P_test value should be considered not the virgin state of the membrane but its current state. Overall, this study focuses on defining design parameters suitable to MF pretreatment for RO process in wastewater reuse by assessing its impact. Therefore, utilities can acknowledge that the membrane surface condition must be considered when users conduct the direct integrity test so that P_test and other relative parameter used to calculate LRV_DIT are adequately measured.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.198-207
• /
• 2009

Distribution of cavitation bubbles relative to change of the sound speed and attenuation in the water was estimated using acoustic signal from 20 to 300 kHz in two cases that cavitation bubbles exist and do not exist. To study generation and extinction property of cavitation bubble, bubble distribution was estimated in three cases: change of rotation speed (3000-4000 rpm), surface area of blade ($32-98\;mm^2$) and elapsed time (30-120 sec). As a result, the radii of the generated bubbles ranged from 10 to $60{\mu}m$, and bubble radius of $10-20{\mu}m$ and $20-30{\mu}m$ was accounted for 45 and 25% of the total number of cavitation bubbles, respectively. And generation bubble population correlated closely with the rotating speed of the blades but did not correlate with the surface area of blade. It was observed that 80% of total bubble population disappeared within 2 minutes. Finally, acoustic data of bubble distribution was compared with optical data.