• Journal of Biomedical Engineering Research
• /
• v.5 no.2
• /
• pp.167-172
• /
• 1984

In the present study, we developed a nuclear stethoscope interfaced with a personal computer (APPLE- II) and evaluated it's performances as compared with the gamma camera. This single-probe, ECG-gated system has been used for displaying the left ventricular time-activity curves, the peak ejection time and its rate, the peak filling time and its rate, and the R-R interval distribution. The radioactivity was measured at every 10msec around the ventricular region, where the activity curves shows the maximal peak to peak variations. The background activity was measured around the lung area showing its counts approximately 50% of the end-diastolic count with minimal variations. The average time-activity curves of 100 beats were used for analysis in the equilibrium study after intravenous injection of 15-20mCi of Tc. The ejection fractions measured by the nuclear stethoscope(Y) were compared with those measured by gamma camera(X) in 47 patients with various heart diseases. The correlation coefficient between two measurements was 0.766 with a relation of Y=1.04 x-8.48. Also, the high reproducibility was obtained for the same patient. Also, the high reproducibility was obtained for the same patient. From this study, we conclude that this device is useful for continuous monitoring in the intensive care unit, as it is portable, compact, and inexpensive.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.105-109
• /
• 2008

A safety valve has a valve mechanism for the automatic release of gas from piping system when the pressure exceeds preset limit cause of a defect of a pressure regulator, condensation of water in a pipe. Therefore, for the safety of pressure regulating station, it is essential to study the flow regime and characteristics of safety valve. This article presents the numerical analysis on the flow analysis, the ejection capacity and required effective discharge area of the safety valve that is established in pressure regulating station. Then, the results are compared and analyzed with domestic and foreign regulations such as API(America Petroleum Institute), EN(European Standard), and NF(Norme Francise). Moreover, the installation number of safety valve is considered by using domestic and foreign regulations and maximum reguired effective discharge area of safety valve.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.573-581
• /
• 2022

This paper deals with the development of CanSat system, which ejects two maple seed-type autorotating science payloads and collects weather information. The CanSat consists of two autorotating science payloads and a container. The container is equipped with devices for launching science payloads and communication with the ground station, and launches science payloads one by one at different designated altitudes. The science payload consists of a space for loading and a large wing, and rotates to generate lift for slowing down the fall speed. Specifically, after being ejected, it descends at a speed of 20 m/s or less, measures the rotation rate, atmospheric pressure, and temperature, and transmits the measured value to the container at a rate of once per second. The communication system is a master-slave structure, and the science payload transmits all data to the master container, which aggregates both the received data and its own data, and transmits it to the ground station. All telemetry can be checked in real time using the ground station software developed in-house. A simulation was performed in the simulation environment, and the performance of the CanSat system that satisfies the mission requirements was confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.11-17
• /
• 2007

In this paper, we present a design, analysis, fabrication and performance test of the novel DoD metal-jet system for application to the high-density and high-temperature-melting materials. The theoretical analysis of the metal-jet nozzle system is derived by using electro-mechanical analogy. Based on the theoretical analysis results, we design the metal-jet print head system and fabricate the metal-jet system, which can eject the droplet of lead-free metal solder in high-temperature. In the experimental test, we set up the test apparatus for visualization of the droplet ejection and measure the ejected droplet volume and velocity. As a result, the diameter, volume and the velocity of the ejected droplet are about 65 $\mu$m $\sim$ 70 $\mu$m, 145p1 $\sim$ 180 pl and 4m/s, which shows quite good agreement with the theoretical analysis results of the 75 $\mu$m-diameter and 220 pl-volume of droplet. In comparison with the experimental result, the errors of diameter and volume are 7% $\sim$ 13% and 18 $\sim$ 34%, respectively.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1174-1183
• /
• 2016

Hydrogen release during severe accidents poses a serious threat to containment integrity. Mitigating procedures are necessary to prevent global or local explosions, especially in large steel shell containments. The management of hydrogen safety and prevention of over-pressurization could be implemented through a hydrogen reduction system and spray system. During the course of the hypothetical large break loss-of-coolant accident in a nuclear power plant, hydrogen is generated by a reaction between steam and the fuel-cladding inside the reactor pressure vessel and also core concrete interaction after ejection of melt into the cavity. The MELCOR 1.8.6 was used to assess core degradation and containment behavior during the large break loss-of-coolant accident without the actuation of the safety injection system except for accumulators in Beznau nuclear power plant. Also, hydrogen distribution in containment and performance of hydrogen reduction system were investigated.

• Korean Journal of Oriental Medicine
• /
• v.15 no.3
• /
• pp.53-61
• /
• 2009

Oxytocin(OT), classically known to stimulate labour and milk ejection, contributes to play an important role in a wide range of behavioral effects including drug addiction. An increasing body of evidence suggests that OT ameliorates acute and long-term effects of commonly used drugs by means of interacting with the mesolimbic dopamine system. Mesolimbic dopamine system is thought to play a major role in the reinforcing properties of drug abuse. Oxytocin receptors in the nucleus accumbens(NAc) and ventral tegmental area(VTA) have been implicated in the regulation of reinforcing effects in abused drugs. In the same way acupuncture may attenuate the reinforcing effects of abused drugs in the NAc and VTA. We have an interest in similar liaison between the substrates of acupuncture and drug addiction that may involve OT. Here, we described the possibility that acupuncture modulates the reinforcing and sensitizing properties of abused drugs in the dopaminergic system via the regulation of activities in the oxytocinergic system. The elements in this paper are summarized as follows : neuroanatomical studies of oxytocinergic innervation and distribution of oxytocin receptors; experiments related to the methamphetamine, cocaine, morphine and ethanol; experiments related to the oxytocin and acupuncture.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.63.1-63.1
• /
• 2019

Solar system small bodies are unusual objects in astronomical survey data in that they are moving on the celestial sphere. In addition, even in a normal status, their magnitudes are changing over time, firstly because their relative positions with respect to the Sun and Earth are continually changing, secondly because they are rotating bodies with non-spherical shapes. Furthermore, some of them might exhibit unexpected activities, which could be caused by mass ejection or disintegration. Detections and observations of such activities are challenging due to their abrupt nature. Therefore, continuous monitoring observations of large number of Solar system small bodies are required to systematically obtain detailed/transient information about them. Since 2018/2019 winter, we have launched a new project using Korea Microlensing Telescope Network (KMTNet) for detecting such transient phenomena of Solar system objects. Our main goal is to monitor the magnitudes and detect sudden brightness changes. We also plan to discover interesting new objects, and monitor rotational brightness oscillations of asteroids. We intend to monitor the magnitudes of ~ 20,000 known Solar system small bodies per night, and acquire lightcurves of ~ 1,000 asteroids.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.225-232
• /
• 2015

The control element drive mechanism (CEDM) is an electro-mechanical device to control reactivity of the nuclear reactor. The conventional CEDM was installed on a nozzle of the reactor vessel closure head as an ex-vessel type. However, there have been demands for an in-vessel CEDM to fundamentally eliminate the rod ejection accident. Conceptual design of the in-vessel CEDM, which was developed based on the existing technology of the ex-vessel CEDM, is introduced in this paper.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.107-116
• /
• 2000

This paper presents the preliminary survey and simulation results of the prediction of Leonid stream's orbital motion. Based on the model survey on eject velocity and perturbation of meteoroid particles, a simulation program was developed and applied to orbital motion of Leonid stream. The Jones ejection distribution model was used to describe the particle's eject velocity and the orbital dynamic model includes perturbations of major planet's gravity. DE405 ephemeris file generated by Solar System Dynamics Group at Jet Propulsion Laboratory in NASA was used for the planet's ephemeris calculations. Solar radiation pressure were also considered in the simulation and 8th order Runge-Kutta algorithm was used a numerical integration method.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.60.4-60.4
• /
• 2019

Small bodies in the solar system are pristine leftovers of planetesimals since the formation epoch (~4.6 Gyr ago). After the formation, icy planetesimals have been preserved in the distant cold place beyond 30 au (i.e., Trans-Neptunian region) until recently without any catastrophic processes but have just been injected into inner region (<~5 au from the Sun) to be observed as comets. On the contrary, asteroids are rocky primitive objects (although some of them contains icy volatiles) distributing in the mainbelt between Mars and Jupiter orbits. Because of frequent encounters in the mainbelt, asteroids have experienced a number of repeated impacts until the present day. Namely, it is important to investigate thermal alternation process of cometary volatiles and refractories in the solar radiation field, whereas collisional and subsequence phenomena of asteroidal bodies. Although recent spacecraft observations revealed the physical natures on the surfaces of comets and asteroids, their interiors still remain largely unexplored. It is likely that a sudden brightening of a comet is associated with rapid sublimation of internal CO and CO2 or phase transition of amorphous H2O. An episodic dust ejection from an asteroid is causally related to an impact among asteroids, sudden sublimation of remaining subsurficial volatiles, etc. Because these transient phenomena provide rare opportunities to investigate their interiors, immediate observations using any optical instruments are particular important. In my presentation, I will review some examples of such transient phenomena in the solar system and propose possible collaborative research using the Korean Small Telescope Network.