• 한국지진공학회논문집
• /
• 제2권1호
• /
• pp.71-78
• /
• 1998

본 연구는 점탄성 감소기가 설치된 건물의 고유치 해석을 위하여 라그라란지 승수 방법(Lagrage multiplier formulating)을 이용하였다. 특성방정식은 건물의 고유진동수, 감소기가 설치된 층의 모드 성분, 감쇠기의 점성 및 강성에 관계된 식으로 나타났으며, 감쇠기의 점성으로 인하여 복소수의 형태로 표현이 되었다. 유도된 특성방정식은 고유치 해석을 위한 일반적인 형태의 식이 아니므로 본 연구에서는 그림 해석을 통하여 감쇠기의 설치로 인한 점성과 증가로 건물의 복소 고유진동수의 변화를 분석하는 방법을 제시하였다. 그림 해석으 결과에 따르면 감쇠기의 점성과 강성으로 인한 복소 고유진동수의 물리적인 의미를 확인할 수 있으며, 최소 및 최대값을 예측할 수 있다. 또한, 복소 고유진동수를 실수의 고유진동수와 모드 감쇠비로 변환하여 상태방정식에 의한 방법의 결과와 비교하여 정확성을 검증하였다.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1479-1486
• /
• 2011

본 논문에서는 후판 영상에서 직선 패턴을 검출하는 간단하면서도 정확한 알고리즘을 제안한다. 후판의 직선 검출은 후판 영상으로부터 후판에 관련된 정보를 분석하거나 인식할 때 기본적으로 사용되는 핵심적인 알고리즘이다. 제안하는 알고리즘에서는 마스크를 이용하여 전체 영상을 탐색하면서 에지 영상을 분석한다. 먼저 마스크에 위치한 에지 패턴의 픽셀들에 대한 공분산 행렬을 계산하고 공분산 행렬의 고유값과 에지 패턴의 통계적 기하학적인 특성 사이의 관계를 분석하여 직선 에지를 검출한다. 직선 패턴이 중복된 에지 영상에 대해서는 모든 직선을 정확하게 검출하기 위하여 먼저 각 직선 패턴을 전체 영상에서 분리한 후 고유값을 계산한다. 또한 에지를 구성하는 픽셀의 수와 에지의 방향 정보를 이용하여 불필요한 직선 에지들을 제거함으로써 후판의 직선 에지를 정확하게 검출하도록 한다. 다양한 후판 영상에 대해서 실험을 수행한 결과는 제안하는 알고리즘이 고유값을 이용한 기존 알고리즘 보다 우수함을 보여준다.

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.211-230
• /
• 2008

Owing to the growing size of the eigenvalue problem and the growing number of eigenvalues desired, solution methods of iterative nature are becoming more popular than ever, which however suffer from low efficiency and lack of proper convergence criteria. In this paper, three efficient iterative eigenvalue algorithms are considered, i.e., subspace iteration method, iterative Ritz vector method and iterative Lanczos method based on the cell sparse fast solver and loop-unrolling. They are examined under the mode error criterion, i.e., the ratio of the out-of-balance nodal forces and the maximum elastic nodal point forces. Averagely speaking, the iterative Ritz vector method is the most efficient one among the three. Based on the mode error convergence criteria, the eigenvalue solvers are shown to be more stable than those based on eigenvalues only. Compared with ANSYS's subspace iteration and block Lanczos approaches, the subspace iteration presented here appears to be more efficient, while the Lanczos approach has roughly equal efficiency. The methods proposed are robust and efficient. Large size tests show that the improvement in terms of CPU time and storage is tremendous. Also reported is an aggressive shifting technique for the subspace iteration method, based on the mode error convergence criteria. A backward technique is introduced when the shift is not located in the right region. The efficiency of such a technique was demonstrated in the numerical tests.

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.198-200
• /
• 1996

The resonance width may be directly determined by solving an eigenvalue equation for width operator which is derived in this work based on the method of complex scaling transformation. The width operator approach is advantageous to the conventional rotating coordinate method in twofold; 1) calculation can be done in real arithmetics and, 2) so-called θ-trajectory is not required for determining the resonance widths. Application to one- and two-dimensional model problems can be easily implemented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.854-859
• /
• 2001

An eigenvalue analysis of a tunable micro-mechanical actuator is presented. The actuator is modeled as a continuum structure. The eigenvalue modified by the tuning voltage is computed through the linearization of the relation between the electrostatic force and the displacement at the equilibrium. A staggered algorithm is employed to perform the coupled analysis of the electrostatic and elastic fields. The stiffness matrix of the actuator is modified at this equilibrium state. The displacement field is perturbed using an eigenmode profile of the actuator. The configuration change of the actuator due to perturbation modifies the electrostatic field and thus the electrostatic force. The equivalent stiffness matrix corresponding to the perturbation and the change in the electrostatic force is then added to stiffness matrix in order to explain natural frequency shifting. The numerical examples are presented and compared with the experiments in the literatures.

• 한국소음진동공학회논문집
• /
• 제17권3호
• /
• pp.257-263
• /
• 2007

Detection of structural damage is an inverse problem in structural engineering. There are three main questions in the damage detection: existence, location and extent of the damage. In concept, the natural frequency and mode shapes of any structure must satisfy an eigenvalue problem. But, if a potential damage exists in a structure, an error resulting from the substitution of the refined analytical finite element model and measured modal data into the structural eigenvalue equation will occur, which is called the residual modal forces, and can be used as an indicator of potential damage in a structure. In this study, a useful damage detection method is proposed and compared with other two methods. Two degree-of-freedom system and Cantilever beam are used to demonstrate the approach. And the results of three introduced method are compared.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.47-52
• /
• 2011

이 논문은 내진검증을 수행하기 위한 유한요소 모델의 개발에 대하여 논의한다. 모델개발에 사용된 기기는 미국의 아칸사스 원자력 발전소의 전자기기 함으로써 유한요소해석 모델개발 과정을 보여준다. 증명된 모델은 진동수 50Hz 이하의 모든 주요모드에서 고유진동수가 5% 이내의 정확치를 가져온다. 유한요소모델은 질점질량과 강성도 방법을 사용한 COSMOSM 이라는 소프트웨어를 채용하여 수학적 모델의 eigenvalue 해석 및 동적해석이 수행되었다. 이 모델은 지정된 하중조건에서 AISC에서 규정한 허용응력치 이하를 나타내었다. 이모델에서 얻는 값들은 참고문헌에서 나타내는 내진 규정에 잘 부합하였다.

• Earthquakes and Structures
• /
• 제19권2호
• /
• pp.119-128
• /
• 2020

In seismic design of a pylon supporting transmission lines in an overhead electricity transmission system, an estimation of the fundamental periods of the pylon in two orthogonal vertical planes is necessary to compute the seismic forces required for sizing pylon members and checking pylon deflections. In current practice, the fundamental periods of a pylon in two orthogonal vertical planes are typically obtained from eigenvalue analyses of a model consisting of the pylon of interest as well as some adjacent pylons and the transmission lines supported by these pylons. Such an approach is onerous and numerically inconvenient. This research focused on development of a simplified method to determine the fundamental periods of pylons. The simplified method is rooted in Rayleigh's quotient and is based on a single-pylon model. The force vectors that can be used to generate the shape vectors required in Rayleigh's quotient are presented in detail. Taking three pylons selected from representative overhead electricity transmission systems having different design parameters as examples, the fundamental periods of the chosen pylons predicted from the simplified method were compared with those from the rigorous eigenvalue analyses. Result comparisons show that the simplified method provides reasonable predictions and it can be used as a convenient surrogate for the tedious approach currently adopted.

• Wind and Structures
• /
• 제8권2호
• /
• pp.89-106
• /
• 2005

For estimating the vortex excited vibrations of overhead transmission lines, the Energy Balance Principle (EBP) is well established for spans damped near the ends. Although it involves radical simplifications, the method is known to give useful estimates of the maximum vibration levels. For very long spans, there often is the need for a large number of in-span fittings, such as in-span Stockbridge dampers, aircraft warning spheres etc. This adds complexity to the problem and makes the energy balance principle in its original form unsuitable. In this paper, a modified version of EBP is described taking into account in-span damping and in particular also aircraft warning spheres. In the first step the complex transcendental eigenvalue problem is solved for the conductor with in-span fittings. With the thus determined complex eigenvalues and eigenfunctions a modified energy balance principle is then used for scaling the amplitudes of vibrations at each resonance frequency. Bending strains are then estimated at the critical points of the conductor. The approach has been used by the authors for studying the influence of in-span Stockbridge dampers and aircraft warning spheres; and for optimizing their positions in the span. The modeling of the aircraft warning sphere is also described in some detail.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.117-124
• /
• 2001

A simplified method fur the eigenpair sensitivities of damped system with multiple eigenvalues is presented. This approach employs a reduced equation to determine the sensitivities of eigenpairs of the damped vibratory systems with multiple natural frequencies. In the proposed method, adjacent eigenvectors and orthonormal conditions are used to compute an algebraic equation whose order is (n+m)x(n+m), where n is the number of coordinates and m the number of multiplicity of multiple natural frequencies. The proposed method is an improved Lee and Jung's method which was developed previously. Two equations are used to find eigenvalue derivatives and eigenvector derivatives in Lee and Jung's method. A significant advantage of this approach over Lee and Jung's method is that one algebraic equation newly developed is enough to compute such eigenvalue derivatives and eigenvector derivatives. This method can be consistently applied to both structural systems with structural design parameters and mechanical systems with lumped design parameters. To demonstrate the theory of the proposed method and its possibilities in the case of multiple eigenvalues, the finite element model of the cantilever beam and 5-DOF mechanical system in the case of a non-proportionally damped system are considered as numerical examples. The design parameter of the cantilever beam is its height. and that of the 5-DOF mechanical system is a spring.