• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.61-68
• /
• 2014

The main objective of this study is to evaluate the preliminary landslide hazard based on the identification of geomorphological features, which are believed to be critical values in the initial state of landslides. Two methods, SINMAP and Planarity analyses, are used to simulate those characteristics where landslides are actually located. Results showed that both methods well discriminate geomorphic features between stable and unstable domains in the landslide areas. SINMAP analysis which is the consecutive model considering external factors like infiltration identifies the landslide hazard especially for debris flow type landslides better than plararity analysis focusing on a specific area. This analysis combined with other methods dealing with specific characteristics of geomorphological feature, the accurate landslide hazard will be evaluated.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.924-932
• /
• 2012

Decomposition of a stereo signal into the primary and ambient components is a key step to the stereo upmix and it is often based on the principal component analysis (PCA). However, major shortcoming of the PCA-based method is that accuracy of the decomposed components is dependent on both the primary-to-ambient power ratio (PAR) and the panning angle. Previously, a modified PCA was suggested to solve the PAR-dependent problem. However, its performance is still dependent on the panning angle of the primary signal. In this paper, we proposed a new PCA-based primary-ambient decomposition algorithm whose performance is not affected by the PAR as well as the panning angle. The proposed algorithm finds scale factors based on a criterion that is set to preserve the powers of the mixed components, so that the original primary and ambient powers are correctly retrieved. Simulation results are presented to show the effectiveness of the proposed algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.72-79
• /
• 1996

The effect of controllers-Exciter, Power System Stabilizer, and Static Var Compensator-in one machine infinite bus system is investigated in this paper. The structure of generator state matrix with controllers is represented, while the Static Var Compensator is installed in generator terminal bus. Eigen-value analysis is performed and the effects of controllers to the dominant eigenvalue in one machine infinite bus system are represented by first order eigenvalue sensitivity coefficients while the operating conditions of the system are varied. Optimization of controller parameters using first order eigenvalue sensitivity coefficients is performed by the Simplex Method. It is proved that exciter control is the most efficient method to improve stability of the system and the effect of Static Var Compensator is small, in the case of one machine infinite bus system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2015

This paper investigates the longitudinal flight dynamics and stability of flapping-wing micro air vehicles. Periodic external forces and moments due to the flapping motion characterize the dynamics of this system as NLTP (Non Linear Time Periodic). However, the averaging theorem can be applied to an NLTP system to obtain an NLTI (Non Linear Time Invariant) system which allows us to use a standard eigen value analysis to assess the stability of the system with linearization around a reference point. In this paper, we investigate the dynamics and stability of a hawkmoth-scale flapping-wing air vehicle by establishing an LTI (Linear Time Invariant) system model around a hovering condition. Also, a direct time integration of full nonlinear equations of motion of the flapping-wing micro air vehicle is conducted to see how the longitudinal flight dynamics appear in the time domain beyond the reference point, i.e. hovering condition. In the study, the flapping-wing air vehicle exhibited three distinct dynamic modes of motion in the longitudinal plane of motion: two stable subsidence modes and one unstable oscillatory mode. The unstable oscillatory mode is found to be a combination of a pitching velocity state and a forward/backward velocity state.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.825-831
• /
• 2017

Radar clutter in real environment is in general heterogeneous and especially nonstationary if radar geometry is of non-sidelooking monostatic structure or bistatic structure. These clutter properties lead to the insufficient number of secondary data of IID(Independent identically distributed) property, conclusively deteriorate clutter suppression performance. In this paper, we propose a clutter suppression algorithm that estimates the clutter signal belonging to cull under test via calculation using only prior information, rather than using the secondary data. Through analyzing the angle-Doppler spectrum of the clutter signal, we show the estimation of the clutter signal using prior information only is possible and present the derivation of a clutter suppression algorithm through eigen-value analysis. Finally, we show the performance of the proposed algorithm by simulation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.1-13
• /
• 2007

We make image that accumulate two principal component after change picture to use GLCM(Gray Level Co-Occurrence Matrix)'s texture feature information. And then these images use preprocess to achieved corner detection and area detection. Experiment results, two principle component conversion accumulation images had most informations about six kind textures by Eigen value 94.6%. When compared with red tide area that uses sea color and red tide area of image that have all principle component, displayed the most superior result. Also, we creates Euclidian space using Euclidian distance measurement about red tide area and clear sea. We identify of red tide area by red tide area and clear sea about random sea area through Euclidian distance and spatial distribution.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.46-53
• /
• 1996

Adaptive LMS algorithm has been used in many application areas due to its low complexity. In this paper input signal is transformed into the subbands with arbitrary bandwidth. In each subbands the dynamic range can be reduced, so that the independent filtering in each subbands has faster convergence rate than the full band system. The DCT transform domain LMS adaptive filtering has the whitening effect of input signal at each bands. This leads the convergence rate to very high speed owing to the decrease of eigen value spread Finally, the filtered signals in each subbands are synthesized for the output signal to have full frequency components. In this procedure wavelet filter bank guarantees the perfect reconstruction of signal without any interspectra interference. In simulation for the case of speech signal added additive white gaussian noise, the suggested algorithm shows better performance than that of conventional NLMS algorithm at high SNR.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.143.1-143
• /
• 2003

본 논문은 브랜드 쌀 구매에 영향을 미치는 요인(factor)들이 소비자 특성에 따라 차이가 있는지를 분석하기 위한 목적으로 수행되었다. 분석을 위하여 서울시에 1,000명의 주부를 대상으로 설문조사를 실시하였으며, 그 주요 내용은 다음과 같다. 먼저 주부들이 쌀 구매에 영향을 미치는 11개 항목을 5점 리커르트 척도를 이용하여 분석하였다. 그 결과 소비자들이 가장 높은 점수를 부여하는 것은 쌀의 잔류 농약 정도로서 4.12점이 나왔으며, 영양가 높은 쌀(4.01점), 쌀알의 모양(3.96점) 및 쌀의 생산지(3.88점) 등의 순위가 높았다. 요인분석을 위해 고유치(eigen value) 값이 0.8 이상인 경우를 기준으로 요인 수를 분석한 결과 다섯가지의 요인이 추출되었으며, 그 특징은 유형적 차원과 무형적 차원으로 구분되었다. 전자인 유형적차원은 물리적 속성(완전미 여부, 도정일자, 잔류농약), 지역성(생산지), 외관성(크기, 모양) 및 가격성등의 가시적 차원으로 소비자가 쉽게 판단하거나 쌀간의 비교가 용이한 특성이며, 후자는 심리적 속성이나 상징성을 의미하는 것으로서 브랜드 상표와 품질 인증 마크가 가지는 신뢰성 등이 영향을 미치는 것으로 분석되었다. 무형적 차원인 식품의 안전성이 도시주부간 쌀 구매에 미치는 차별성을 알아보기 위하여 정규성 검정 결과에 따라 독립표본 T-검정을 실시하였다. 분석에서 도시주부가 특성별로 두 집단으로 구분되는 기준은 자의적 분류보다는 공통적인 기준을 이용하고자 평균값(나이, 학력, 소득, 동거가족 수)을 기준으로, 그 외의 경우는 더미변수(주부직업 유무, 주거형태 및 거주지역)를 이용하여 구분하였다. 식품의 안전성으로 추출된 요인 값의 평균에 대해 두 집단간 차이를 검정하였으며, 분석 결과 주거형태가 1％ 유의수준에서, 주부취업 여부 및 거주지역이 각각 5%유의수준에서 통계적 유의성이 있는 것으로 분석되었다. 반면 주부간 나이, 학력, 소득수준 및 동거가족 수에서는 유의미한 결과가 추정되지 못하였다. 본 연구결과를 볼 때, 식품의 안전성을 고려한 쌀의 마케팅 전략은 취업주부, 아파트 거주자 및 강남지역 주부들을 대상으로 한 판매활동 강화가 필요하다. 아울러 통계적으로 유의미한 결과를 나타내는 도시 주부의 특성 변수들을 세밀하게 구분해서 연구·분석하는 시장세분화 연구가 필요하다.

• Child Health Nursing Research
• /
• v.8 no.3
• /
• pp.291-301
• /
• 2002

This study was performed to develop a scale of maternal conflict based on already established scales and the literature review. The major purpose of this study was to develop a scale of which contains difficulties which mother can feel to rearing her child and can be applied to mothers at home or employed mothers. 68 items were developed. For content validity test, the items were examined by 7 experts panel with Likert 4 scale. The 39 items were selected as high validity from 86% of the experts. The item number of each area and the misunderstanding words were corrected by advices of experts. 10 mothers again examined 39 items in order to correct the misunderstanding words and the long sentences. For reliability and factor analysis of 39 items, 496 mothers participated. 34 items were chosen because 5 items that corrected item-total correlation coefficient were lower than 0.2 were excluded by the result of reliability analysis. Factor analysis was done with 34items. 6 factors were classified higher than eigen value 1.0, 28 items were chosen because 6 items that factor loadings were lower than 0.4 were excluded. These factors were named as employment and caring for child(6 items), child education(5 items), support system for caring for child(4 items), interaction with mother and child(4 items), view of maternal role(5 items) and me as human being(4 items). Reliability analysis was done with 28 items. 1 item(36 number of factor 1) was excluded because corrected item-total correlation coefficient were lower than 0.2. Therefore, 27 items were chosen. Maternal Conflict Scale was contained 27 items. The corrected item-total correlation coefficient of 27 items were ranged from .2345 to .5240 and Cronbach alpha coefficient of those was .8207 by the results of reliability analysis. It can be evaluated that this scale had a high validity and reliability because of passing through an objective process of test.