• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.30-38
• /
• 2023

As the number of old buildings subject to safety inspection increases, the burden on designated institutions and management entities that are responsible for safety management is increasing. Accordingly, when selecting buildings subject to safety inspection, appropriate safety inspection standards and appropriate technology are essential. The current safety inspection standards for old buildings give low scores when it is difficult to confirm damage such as cracks in structural members due to finishing materials. This causes the evaluation results to be underestimated regardless of the actual safety status of the structure, resulting in an increase in the number of aging buildings subject to safety inspection. Accordingly, this study proposed a thermal imaging technique, a non-destructive and non-contact inspection, to detect cracks inside finishing materials. A concrete specimen was produced to observe cracks inside the finishing material using a thermal imaging camera, and thermal image data was measured by exciting a heat source on the concrete surface and cracked area. As a result of the measurement, it was confirmed that it was possible to observe cracks inside the finishing material with a width of 0.3mm, 0.5mm, and 0.7mm, but it was difficult to determine the cracks due to uneven temperature distribution due to surface peeling and peeling of the wallpaper. Accordingly, as a result of performing data analysis by deriving the amplitude and phase difference of the thermal image data, clear crack measurement was possible for 0.5mm and 0.7mm cracks. Based on this study, we hope to increase the efficiency of field application and analysis through the development of technology using big data-based deep learning in the diagnosis of internal crack damage in finishing materials.

• Analytical Science and Technology
• /
• v.18 no.2
• /
• pp.120-129
• /
• 2005

Volatile organic compounds (VOCs) have been recognized as major contributor to air pollution. The catalytic oxidationis is one of the most important processes for VOCs destruction due to the possibility getting high efficiency at low temperature. In this study, monometallic Pt, Ir and bimetallic Pt-Ir were supported to $TiO_2$. In order to distribute metals uniformly, $H_2O-H_2$ treatment method was used. Xylene, toluene and MEK were used as reactants. The monometallic or bimetallic catalysts were prepared by the excess wetness impregnation method and characterized by XRD, XPS, and TEM analysis. Pt catalyst showed higher conversion than Ir catalyst and Pt-Ir bimetallic catalyst showed the highest conversion. The catalysts prepared by $H_2O-H_2$ treatment had better VOC's conversion than that of nothing treatment. In the VOCs oxidation, Pt-Ir bimetallic catalysts had multipoint active sites, so it improved the range of Pt metal state. Therefore, bimetallic catalysts showed higher conversion of VOCs than monometallic ones. $H_2O-H_2$ treatment effected an uniform distribution of Pt particles. In VOCs oxidation was found to follow first order reaetion kinetics. The activation energy of $H_2O-H_2$ treatment catalysts was lower than that of untreated ones. In this study, the a small amount of Ir was used with Pt to promote the oxidation conversion of VOCs.

• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.55-78
• /
• 2016

In this study, service quality attributes of uTradeHub were classified based on the Kano model, and quality attributes that should be managed in priority to improve the service quality of uTradeHub were investigated using Timko's customer satisfaction coefficient(CSC) and average satisfaction coefficient(ASC). The results of the study are summarized as follows. First, as a result of classifying service quality attributes based on Kano model, 12 one dimensional qualities, 5 must-be qualities, 2 indifferent qualities were deducted, and many quality attributes of uTradeHub service were confirmed to be one dimensional quality to which is needed to be paid attention and paid more detailed attention to enhance service quality. Second, in the analysis result using Timko's customer satisfaction coefficient, "post processing for problems and complaints", "cost reduction", "efficiency of business processing" were ranked in the top of satisfaction coefficient, and they found to be quality attributes that customer satisfaction increases when service quality was satisfied. While, "post processing for problems and complaints", "interaction", "ability to respond promptly when problems occur" were ranked in the top of unsatisfaction coefficient, and they were analysed to be quality attributes that customer complaints increase when service quality was unsatisfied. Third, in the result of analyzing the quality attributes that should be managed in priority to improve the service quality of uTradeHub based on the average satisfaction coefficient(ASC), "post processing for problems and complaints", "cost reduction", "useful information" were ranked in the top 3, and they were classified as quality attributes that the satisfaction level increases more when they are improved than now, but the satisfaction level decreases when they are worsen.

• Management & Information Systems Review
• /
• v.39 no.2
• /
• pp.17-37
• /
• 2020

The purpose of this study is to investigate the global spillover effects through the existence of linear and nonlinear causal relationships between the US, European and BRIC financial markets after the period from the introduction of the Euro, the financial crisis and the subsequent EU debt crisis in 2007~2010. Although the global spillover effects of the financial crisis are well described, the nature of the volatility effects and the spread mechanisms between the US, Europe and BRIC stock markets have not been systematically examined. A stepwise filtering methodology was introduced to investigate the dynamic linear and nonlinear causality, which included a vector autoregressive regression model and a multivariate GARCH model. The sample in this paper includes the post-Euro period, and also includes the financial crisis and the Eurozone financial and sovereign crisis. The empirical results can have many implications for the efficiency of the BRIC stock market. These results not only affect the predictability of this market, but can also be useful in future research to quantify the process of financial integration in the market. The interdependence between the United States, Europe and the BRIC can reveal significant implications for financial market regulation, hedging and trading strategies. And the findings show that the BRIC has been integrated internationally since the sub-prime and financial crisis erupted in the United States, and the spillover effects have become more specific and remarkable. Furthermore, there is no consistent evidence supporting the decoupling phenomenon. Some nonlinear causality persists even after filtering during the investigation period. Although the tail distribution dependence and higher moments may be significant factors for the remaining interdependencies, this can be largely explained by the simple volatility spillover effects in nonlinear causality.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.92-109
• /
• 2015

Broadcast encryption is a cryptographic primitive that allows a sender to securely broadcast a message to a set of receivers. The most influential broadcast encryption system was proposed in 2001 by Naor, Naor, Lotspiech, based on a pseudo-random generator and the Subset Difference (SD) method. In this paper, we suggest a new broadcast encryption system that is based on secret sharing and SD methods. On an efficiency aspect, our system achieves O(r) transmission cost, O($log^2n$) storage cost, and O(1) computational cost for the number n of users and the number r of revoked users. Compared to O(log n) computational cost in the previous SD method, our system has the advantage that it needs only constant-sized computational cost for decryption, regardless of the number n or r. On a security aspect, our system can achieve tighter security reduction than the previous SD method and the gap of security loss is about O(n log n). Moreover, our result shows that it is possible to give the effect of the SD method while using an information-theoretically secure key distribution technique as in the Complete Subtree method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.724-729
• /
• 2008

This paper presents the calculation of the required bandwidth of common frequency bandwidth applying queueing theory for maximizing the efficiency of frequency resource of WPAN(Wireless Personal Area Network) based Digital acoustic and communication devices. It assumed that LBT device(ZigBee) and FH devices (DCP, RFID and Bluetooth) coexist in the common frequency band for WPAN based Digital acoustic and communication devices. Frequency hopping (FH) and listen before talk (LBT) have been used for interference avoidance in the short range device (SRD). The LBT system transmits data after searching for usable frequency bandwidth in the radio wave environment. However, the FH system transmits data without searching for usable frequency bandwidth. The queuing theory is employed to model the FH and LBT system, respectively. As a result, the throughput for each channel was analyzed by processing the usage frequency and the interval of service time for each channel statistically. When common frequency bandwidth is shared with SRD using 250mW, it was known that about 35 channels were required at the condition of throughput 84%, which was determined with the input condition of Gaussian distribution implying safety communication. Therefore, the common frequency bandwidth is estimated with multiplying the number of channel by the bandwidth per channel. These methodology will be useful for the efficient usage of frequency bandwidth.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.217-228
• /
• 2017

Full-scale flexural testing of asymmetric H-shape hybrid composite beams was conducted in this study. In fabricating hybrid H-shape sections, high strength steels were utilized for the bottom flange while ordinary strength steels were used for the top flange and web. With adding a fully composite floor slab, a total of 8 hybrid composite beam specimens were tested. The primary objective was to develop the asymmetric hybrid H-shape composite beams with maximized flexural efficiency and investigate their flexural behavior. Not all the hybrid composite specimens tested in this study exhibited the plastic moment and reasonable deformability. In the specimens with high-strength bottom flange, the longitudinal shear crack of the slab along the beam axis often preceded the development of beam plastic moment, although the slab was designed as fully composite. The mechanical reason for this unexpected behavior is discussed. It is emphasized that the longitudinal shear strength of composite slab should be checked in designing hybrid composite beams utilizing high strength steels like in this study.

• Korean Journal of Microbiology
• /
• v.39 no.1
• /
• pp.27-35
• /
• 2003

No currently available methods to monitor pathogenic protozoa, Cryptosporidium and Giardia in environmental water come close to acceptable sensitivity, specificity and reproducibility, and so it has to be accompanied by thorough quality control and performance evaluation to credibly predict the distribution of them. We collected surface water samples from the Han River and spiked our prepared (oo)cysts, determined Matrix Spike recoveries using USEPA Method 1623 and considered what factors influence MS recovery and validity. As a result, average 46% of spiked oocysts and 60% of spike cysts were recovered, but repetitive sampling and statistical approach seemed to be necessary to determine the environmental pollution level of two protozoa as their variation coefficients was so much as 35oio and 26%. And MS recoveries with two acid dissociations during immunomagnetic separation were improved more 10% than that with one dissociations and the use of spiked suspension enumerated by flow cytometry instead of manual preparation enhanced the validity and reliability in spiking tests. Because fluorescence characteristics of (oo)cysts stained on well slides with FITC-labeled monoclonal antibodies and DAPI was not always same, well Elides from spiked field samples were helpful to evaluate the performance of staining. We found many (oo)cyst-like objects with typical fluorescence, not (co)cysts, from the Han River water samples, and then it was concluded that nuclei staining by DAPI (4',6-diamidino-2-phenylindole) and examination by Differential Interference Contrast Microscope should be critical for valid identification.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.768-782
• /
• 2010

Because of the different shooting position between multi-view cameras and the imperfect camera calibration, Illumination mismatches of multi-view video can happen. This variation can bring about the performance decrease of multi-view video coding(MVC) algorithm. A histogram matching algorithm can be applied to recompensate these inconsistencies in a prefiltering step. Once all camera frames of a multi-view sequence are adjusted to a predefined reference through the histogram matching, the coding efficiency of MVC is improved. However the histogram distribution can be different not only between neighboring views but also between sequential views on account of movements of camera angle and some objects, especially human. Therefore the histogram matching algorithm which references all frames in chose view is not appropriate for compensating the illumination differences of these sequence. Thus we propose new algorithms both the image classification algorithm which is applied two criteria to improve the correlation between inter-view frames and the histogram matching which references and matches with a group of pictures(GOP) as a unit to advance the correlation between successive frames. Experimental results show that the compression ratio for the proposed algorithm is improved comparing with the conventional algorithms.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.583-594
• /
• 2002

Assuring the security of group communications such as tole-conference and software distribution requires a common group key be shared among the legal members in a secure manner. Especially for large groups with frequent membership change, efficient rekey mechanism is essential for scalability. One of the most popular ways to provide sealable rekey is to partition the group into several subgroups. In this paper, we propose a two-layered key management scheme which combines DEP and CBT, a protocol in which subgroup manager cannot access the multicast data and another that has a multi-core, respectively. We also select sub-group key management protocols suitable for our structure and design new rekey protocols to exclude the subgroup managers from the multicast data. Compared to previous protocols based on CBT, our scheme provides forward secrecy, backward secrecy and scalability. This would reduce the number of encryption and decryption for a rekey message and would improve the efficiency number of rekey messages and the amount of information related to group members that group managers must maintain compared to DEP.