• 제목/요약/키워드: Efficiency measurement

검색결과 2,333건 처리시간 0.033초

고속 3차원 형상 측정 장치의 효율성 향상에 관한 연구 (A Study on the Efficiency Improvement of a 3D Shape Measuring Apparatus With High Speed)

  • 박승규;이일근;이영훈
    • 한국컴퓨터정보학회논문지
    • /
    • 제6권4호
    • /
    • pp.104-109
    • /
    • 2001
  • 본 논문에서는 정현파 줄무의 패턴을 이용하여 고속이면서도 정밀하게 측정체 표면의 3차원 형상을 측정하는 시스템을 구성하였다. 또한 획득영상의 위상정보 부족 영역에대하여 효율적인 위상복원 방법을 사용하여 측정효율을 높이는 방법을 제안하였고 이를 실험적으로 확인하였다. 카메라의 측정각도와 측정체의 형상에 따라 카메라에 획득되는 영상에는 필연적으로 위상 정보가 부족한 영역이 존재하며 본 논문에서는 이 영역을 추출하고 가변 크기의 위상복원 창과 가변 비율을 갖는 정규화 방법을 사용하여 위상을 효과적으로 복원함으로써 시스템의 측정 효율을 높였다.

  • PDF

고속다기통 및 회전식 압축기의 체적효율 (A STUDY ON THE VOLUMETRIC EFFICIENCY OF HIGH SPEED MULTI-CYLINDER AND ROTARY COMPRESSOR)

  • 오후규;조권옥
    • 한국수산과학회지
    • /
    • 제12권1호
    • /
    • pp.13-18
    • /
    • 1979
  • Volumetric efficiency is a determining factor for tile measurement of compessor capacity, but it is practically hard to take an accurate measurement of capacity characteritics so that most of users trust the data of makers catalogue. We often realized the discrepancy in their data with actual capacity. This study was attemped to establish the basic data of capacity characteristics of compressor by measuring volumetric efficiency of high speed multi-cylinder compressor and rotary compressor. The volumetric efficiency was calculated based on the quantity of the flow of ammonia vapor and pressure difference in suction state of orifice plate and compressor. The volumetric efficiency of high speed multi-cylinder compressor was $37-61\%$ and that of rotary compressor was $57-82\%$ when compression ratio was in the range of 4-12. The discrepancy in volumetric efficiency at an equal evaporating temperature between the makers catalogue and the measured data was $5.5\%$.

  • PDF

국내 중소건설업체의 효율성 평가에 관한 연구 (A Study on the Evaluation of Efficiency in the Korean Small and Medium sized Construction Firms)

  • 김혁;유한주;송광석
    • 품질경영학회지
    • /
    • 제38권3호
    • /
    • pp.463-474
    • /
    • 2010
  • In this study, we evaluate the efficiency of Construction Industry using Data Envelopment Analysis(DEA). Since the Construction Industry has been traditionally operated through competition, it is important to measure the efficiency. In this paper, we empirically analyze the Efficiency of the 50 Korean Construction Industry. In detail, we used the scale of efficiency in order that efficiency cannot be affected by the total technical efficiency of each company and the scale of DMU by applying CCR or BBC model. Also, we analyzed the changes of measurement DEA model score. we adopted the basic DEA, RTS Region and MPSS(Most Productive Scale Size) method which are combined with efficiency measurement model in order to analyze the operational status. Furthermore, by complementing the shortfalls of the scale efficiency value of the DEA Model, RTS Region Model can be recommended to be appropriate in the evaluation of ideal input/output Quantity. In particular, input variables are total assets, construction capacity, the technical staff and output variables are sales volume, operating income. The result of RTS Region and MPSS shows that 9 DMUs of the efficiency frontier in the Construction Industry are analyzed to be relatively efficient DMUs, and 41 DMUs are analyzed to be inefficient DMUs, and finally inefficient DMUs are separated with Region 1 and Region 6.

자유비행 분리보증 효율성 측정모델 연구 (Models for Measurement of Efficiency of Free Flight Separation Assurance)

  • 이대용;강자영
    • 한국항행학회논문지
    • /
    • 제15권6호
    • /
    • pp.977-985
    • /
    • 2011
  • 항공기 분리보증은 자유비행 분리보증의 핵심요구사항이다. 본 논문에서는 자유비행 공역 효율성 측정을 위한 다양한 분리보증 및 효율성 측정 모델을 고찰하고, 자유비행 분리보증을 위한 포텐셜 필드 알고리즘과 기하학적 알고리즘, 두 가지의 충돌회피 기법을 모델링 하여 항공기 성능데이터와 두 가지 조건의 시나리오 상황에서 분리보증 해결과 운항 효율성을 측정하였다. 실험결과 자유비행 공역 하에서 기하학적 알고리즘 적용이 포텐셜 필드 알고리즘 보다 분리보증 해결, 운항 효율성 측면에서 우수하였으며, 동일한 알고리즘에서도 선회각, 속도 복합모델인 기하학적 결합 알고리즘이 더욱 효율적인 것으로 나타났다.

IR-UWB 레이더 센서 기반 수면 효율 측정 알고리즘 (Sleep Efficiency Measurement Algorithm Using an IR-UWB Radar Sensor)

  • 최정우;이유나;조석현;임영효;조성호
    • 한국통신학회논문지
    • /
    • 제42권1호
    • /
    • pp.214-217
    • /
    • 2017
  • 본 논문에서는 원거리에서의 IR-UWB 레이더 센서기반 수면 효율 측정 알고리즘을 제안한다. IR-UWB 레이더로 수면 중 측정 가능한 호흡수, 심박수, 움직임 등의 생체 지표 중 움직임과 수면 효율과의 관련성을 분석하고, 움직임을 기반으로 한 수면 효율 측정 알고리즘을 제안한다. 이에 대한 타당성 및 성능검증을 위해 실제 병원에서의 수면다원검사 환자 3명에 대하여 본 알고리즘을 적용한 결과 평균 3.9% 이내의 절대오차를 갖는 검출성능을 얻었다.

유도심경의 인프로세스 측정시스템 개발 (On the Development of In-process Measurement System for Guidance Core Diameter)

  • 김정두
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.190-195
    • /
    • 1998
  • The guidance core is a principal part installed between the ink and the pen nib for the function of supplying ink to paper with reqularity. The current measurement of this product, Guidance core, in service is done by on operator with a micrometer, which could result in the decrease of productivity and working efficiency as well as causing errors. In this study, the existing measurement of the dialmeter of the Guidance core in the centerless grinding process is changed to the inprocessor measurement which enables consecutive measurement during the production of the Guidance core, and this system is also developed to work properly under bad circumstances and to have superior reliance and operational efficiency.

  • PDF

저비용 고효율의 IoT 기반의 부력식 레벨센서 설계 (Design of IoT-based Buoyancy-based Level Sensors for Low-cost and High-efficiency)

  • 김병곤;장수관
    • 센서학회지
    • /
    • 제33권5호
    • /
    • pp.378-383
    • /
    • 2024
  • This study developed a buoyancy-based level sensor composed of a buoyant object, a sensing unit, and a signal generation unit to meet the demand of low-cost, high-efficiency inundation-detection sensors. The volume of the submerged buoyant object remained nearly constant even in the presence of water-level fluctuations, allowing stable water-level data acquisition. The measurement resolution and measurement repeatability were confirmed to be within 0.4 mm and 0.3%, respectively. LoRa-based communication was used to implement the IoT-based inundation-detection sensor. The measurement deviation between the sensors is approximately 0.15%. The unresponsive level at which measurement was not possible was confirmed to be approximately 2 mm. Excluding this unresponsive range, the water level measurements exhibited very high linearity, allowing precise measurements. Furthermore, a test bed was established in an inundation-vulnerable area using buoyancy-based level sensors.

길이 비율 효율성 측정법을 이용한 자료포락분석 (Data Envelopment Analysis(DEA) using Length Rate-based Efficiency Measurement)

  • 이상운
    • 한국인터넷방송통신학회논문지
    • /
    • 제21권3호
    • /
    • pp.143-149
    • /
    • 2021
  • 본 논문은 자료포락분석의 핵심인 상대효율을 계산하는데 있어 길이비율 측정법을 제안하였다. 상대효율을 계산하는 유일한 방법으로 선형계획법이 알려져 왔다. 이 방법은 모든 의사결정단위들에 대한 단편적인 선형계획법을 풀어야 하는 문제점을 갖고 있었다. 본 논문에서는 단순히 입력-출력 관계를 2차원 그래프 작도로 효율적과 비효율적인 의사결정단위를 구별하고, 비효율적인 의사결정단위의 현재 달성한 효율성은 길이비율 측정법으로 구하였다. 제안된 방법을 다양한 실험사례들에 적용한 결과 선형계획법의 적용 오류로 인한 문제점도 해결할 수 있었으며, 항상 정확한 상대효율이 계산됨을 보였다. 또한, 이미 100% 효율성을 달성한 의사결정단위들을 제외하고, 단지 비효율적인 의사결정단위들에 대해서만 직선을 그려 기준 집합을 결정하고, 상대효율을 쉽게 구할 수 있었다.

Measurement of Zero Dispersion Wavelength in an Optical Fiber Using the Oscillatory Behavior of Four-Wave Mixing Efficiency

  • Kim, Dong-Hwan;Kim, Sang-Hyuck;Jo, Jae-Cheol;Choi, Sang-Sam
    • Journal of the Optical Society of Korea
    • /
    • 제5권1호
    • /
    • pp.20-24
    • /
    • 2001
  • Non-destructive measurement of zero-dispersion wavelength variation in a dispersion shifted fiber by four-wave mixing technique is carried out. The oscillatory behavior of the four-wave mixing efficiency is utilized for the measurement of the linear dispersion slope and zero-dispersion wavelength. A simple formula useful for engineering estimation of the characteristics of fiber four-wave mixing efficiency is presented.

균형성과표를 활용한 전자의무기록시스템의 성과측정 모형개발 (Development of the Performance Measurement Model of Electronic Medical Record System - Focused on Balanced Score Card -)

  • 이경희;김영훈;부유경
    • 한국병원경영학회지
    • /
    • 제21권4호
    • /
    • pp.1-12
    • /
    • 2016
  • The purpose of this study are suggest to performance measurement model of Electronic Medical Record(EMR) and Key Performance Index(KPI). For data collection, 665 questionnaires were distributed to medical record administrators and insurance reviewers at 31 hospitals, and 580 questionnaires were collected(collection rate: 87.2%). Regarding methodology, Critical Success Factor(CSF) and index of the information system were derived based on previous studies, and these were set as performance measurement factors of EMR system. The performance measurement factors were constructed by perspective using BSC, and analysis on causal relationship between factors was conducted. A model of causal relationship was established, and performance measurement model of EMR system was proposed through model validation. Analysis on causal relationship between performance management factors revealed that utility cognition of the learning & growth perspective factor had causal relationship with job efficiency(${\beta}=0.20$) and decision support(${\beta}=0.66$) of the internal process perspective factors, and security had causal relationship with system satisfaction(${\beta}=0.31$) of the customer perspective factor. System quality had causal relationship with job efficiency(${\beta}=0.66$) and decision support(${\beta}=0.76$) of the internal process perspective factors, all of which were statistically significant(P<0.01). Job efficiency of the internal process perspective had causal relationship with system satisfaction(${\beta}=0.43$), and decision support had causal relationship with decision support satisfaction(${\beta}=0.91$) and job satisfaction (${\beta}=0.74$), all of which were statistically significant(P<0.01). System satisfaction of the customer perspective had causal relationship with job satisfaction(${\beta}=0.12$), job satisfaction had causal relationship with cost reduction(${\beta}=0.53$) of the financial perspective, and decision support satisfaction had causal relationship with productivity improvement(${\beta}=0.40$)of the financial perspective(P<0.01). Also, cost reduction of the financial perspective had causal relationship with productivity improvement(${\beta}=0.37$), all which were statistically significant(P<0.05). Suitability index verification of the performance measurement model whose causal relationship was found to be statistically significant revealed that $X^2/df=2.875$, RMR=0.036, GFI=0.831, AGFI=0.810, CFI=0.887, NFI=0.838, IFI=0.888, RMSEA=0.057, PNFI=0.781, and PCFI=0.827, all of which were in suitable levels. In conclusion, the performance measurement indices of EMR system include utility cognition, security, and system quality of the learning & growth perspective, decision support and job efficiency of the internal process perspective, system satisfaction, decision support satisfaction, and job satisfaction of the customer perspective, and productivity improvement and cost reduction of the financial perspective. In this study, it is expected that the performance measurement indices and model of EMR system which are suggested by the author, will be a measurement tool available for system performance measurement of EMR system in medical institutions.