• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.194-201
• /
• 2013

To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.111-118
• /
• 2000

Concrete cracking due to the temperature gradient across the wall, caused by the difference in temperature between cryogenic liquid natural gas stored and surrounding environment of in-ground LNG storage tank, is investigated in this study. Crack propagation of concrete LNG tank is effectively simulated by using a layered degenerated shell element. In addition, material nonlinearity is taken into consideration on the basis of the nonlinear elastic-orthotropic model. Finally, numerical analysis for a real LNG storage tank is conducted with the objective to verify the efficiency of the introduced model.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.108-109
• /
• 2002

Optical tweezers는 광압(radiation pressure)을 사용하여 입자들을 포획하거나 조절할 수 있다는 점에서 마이크로스케일의 유전체구뿐만 아니라 세포에서도 널리 사용되고 있다. 일반적으로 빛이라는 것은 광자들의 집합체로서 광자의 입자성으로 인하여 외부의 물체와 충돌시 운동량을 전달하게 되고 이것을 광압(radiation pressure)이라고 하며 optical tweezers [1]는 이 광압을 이용한 방법중 하나이다. 레이저빔을 입자에 집속 시켜 주게 되면 입자는 광압에 의해서 gradient force와 scattering force의 힘을 받게 된다. (중략)

• Journal of applied mathematics & informatics
• /
• 제32권5_6호
• /
• pp.761-781
• /
• 2014

An exponentially accurate nonconforming spectral element method for elasticity systems with discontinuities in the coefficients and the flux across the interface is proposed in this paper. The method is least-squares spectral element method. The jump in the flux across the interface is incorporated (in appropriate Sobolev norm) in the functional to be minimized. The interface is resolved exactly using blending elements. The solution is obtained by the preconditioned conjugate gradient method. The numerical solution for different examples with discontinuous coefficients and non-homogeneous jump in the flux across the interface are presented to show the efficiency of the proposed method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.156-158
• /
• 2003

An implicit finite element implementation for Leblond's transformation plasticity constitutive equations, which are widely used in welded steel structure is proposed in the framework of parallel computing. The implementation is based upon the multiplicative decomposition of deformation gradient and hyper elastic formulation. We examine the efficiency of parallel computation for the finite element analysis of a welded structure using domain-wise multi-frontal solver.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.406-410
• /
• 1990

This paper presents an approximate analysis of the serial production lines using decomposition technique. A serial production line consists of a series of unreliable machines separated by finite buffers. The serial production line is evaluated by approximation method, the results of which are compared with those examined by the discrete time event simulation, based on this approximation method, a gradient technique is proposed, which improves the efficiency of an operation of production line through the re-allocation of buffers.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.263-267
• /
• 2006

The path of a flapping airfoil during upstroke and down-stroke is optimized for maximum thrust and propulsive efficiency. The periodic flapping motion in combined pitch and plunge is described using Non-Uniform B-Splines(NURBS). A gradient based algorithm is employed for optimization of the NURBS parameters. Unsteady, low speed laminar flows are computed using a Navier-Stokes solver in a parallel computing environment based on domain decomposition. It is shown that the thrust generation is significantly improved in comparison to the sinusoidal flapping motion. For a high thrust generation, the airfoil stays at a high effective angle of attack for short durations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.45-48
• /
• 1987

In applications of step-motor, the requirements of small-size and strong-power gave birth to feed-back drive to the maximum efficiency and complete damping. In this paper, a new scheme that determines switching times from sensed values of position and speed is presented for simple bang-bang type drive circuit. The optimal values of each phase switching times are obtained using conjugate gradient method.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.693-702
• /
• 2010

In this paper, FETI(Finite Element Tearing and Interconnecting) method is introduced in order to improve numerical efficiency of Staggered method. The porous media theory, the Staggered method and the FETI method are briefly introduced in this paper. In addition, we account for the MPI(Message Passing Interface) library for parallel analysis, and the proposed combined Staggered method with FETI method. Finally Lagrange multipliers and CG(Conjugate Gradient) algorithm to solve decomposed domain are proposed, and then the proposed method is verified to be numerically efficient by MPI library.

• East Asian mathematical journal
• /
• 제30권3호
• /
• pp.327-334
• /
• 2014

In this paper, we construct extrapolated expanded mixed finite element approximations to approximate the scalar unknown, its gradient and its flux of semilinear Sobolev equations. To avoid the difficulty of solving the system of nonlinear equations, we use an extrapolated technique in our construction of the approximations. Some numerical examples are used to show the efficiency of our schemes.