• Proceedings of the CALSEC Conference
• /
• 2005.03a
• /
• pp.130-134
• /
• 2005

This research describes the comparison broker's role and its effectiveness measurement using a developed logical framework of comparison shopping service. And verifies that seller-led comparison challenge method provide comparison information of products to buyers more efficiently. In electronic commerce, buyer's satisfaction of purchase (S) can be defined as an interactive function between seller's competitiveness vector (P) of products that supplied to the market, and buyer's informed level vector (B) of products that is known from a lot of sources. Then the buyer's informed level can be changed through the information analysis among products by transformation process using comparison matrix (C). So the role of comparison shopping is to construct a comparison matrix and to serve it to the buyers, and to change the buyer's informed level. The changed informed level influences a buyer's satisfaction, that improved satisfaction of purchase is defined as the effectiveness of comparison shopping. As a perfect provision and usage of comparison matrix is impossible cause of cognitive limit, the most efficient method for improving the comparison effectiveness is the comparison challenge that detects the comparison elements of the largest buyer's information efficiency, and then to be compared between elementary products selectively. This research verifies the substantial superiority of comparison challenge through television market data experiments.

• The Research Journal of the Costume Culture
• /
• v.17 no.5
• /
• pp.746-757
• /
• 2009

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern, width of materials, and marker orientation using man's shirts. To compare the marking efficiency of shirts, plain and check-patterned materials with the intervals of $1.5{\times}1.5cm$, $3{\times}3cm$, and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on materials width, the highest efficiency was obtained with nap-either-way position of 150cm, plain materials and lowest efficiency with nap-one-way position of 150cm, $5{\times}5cm$ check-pattern materials. Regardless of the direction of marker position, the marking efficiency of 150cm width was higher than 110cm width in the plain, $1.5{\times}1.5cm$ and $3{\times}3cm$ check-pattern interval, but the marking efficiency of 110cm width was higher than 150cm width in the $1.5{\times}1.5cm$ check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and material width, the highest efficiency was obtained with nap-either-way position. And nap-up-and-down and nap-one-way follows next. Third, in the comparison of marking efficiency depending on check-pattern interval, the efficiency of plain materials was higher than those of check-patterned materials. And increasing the intervals decreased marking efficiency and vice versa. So the lowest efficiency was obtained with $5{\times}5cm$ check patterned materials.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.15-30
• /
• 2011

This study is designed to measure the relative efficiency of regional fishery cooperatives based on Data Envelopment Analysis(DEA) methods. Selecting 40 regional fishery cooperatives in Busan as Decision Making Units (DMUs), the study uses their panel data from 2007 to 2008 to rank the relative efficiency of the DMUs. First, the efficiency score of the DMUs are calculated using CCR, SBM, and super-SMB model. Within the model, input variables are the number of employees and area of fishery cooperatives. Output variables are the amount of deposit money, loan and profit. Based on the efficiency scores calculated from super-SMB model, the efficiency ranking of the DMUs is determined. Second, the differences in average efficiency calculated from the three DEA models are tested using a pair-wise mean comparison test. The results based on the efficiency scores evaluated from super-SMB model show that seven out of the forty DMUs are efficient; among the efficient DMUs, the DMUs that can be benchmarked for inefficient DMUs through the frequency analysis of reference set being identified. Third, the differences in average efficiency of the three DEA models between 2007 and 2008 are tested using pair-wise mean comparison test and the study estimates the efficiency change of the DMUs between 2007 and 2008 using Malmquist productivity index(MPI). Finally, the paper suggests an improved composite DMU superior to the inefficient DMUs evaluated by Super-SBM model.

• Environmental and Resource Economics Review
• /
• v.9 no.2
• /
• pp.349-371
• /
• 2000

Data Envelopment Analysis model is a linear programming based technique for measuring the relative performance of organizational units where the presence of multiple inputs and outputs makes comparison difficult. A common measure for relative efficiency is weighted sum of outputs divided by weighted sum of inputs. DEA model allows each unit to adopt a set of weight that shows it in the most favorable light in comparison to the other unit. In this paper, we present the mathematical background and characteristics of DEA model, and give a short case study where we apply the DEA model to evaluate the relative efficiencies of 51 global electricity companies. The technical efficiency and scale efficiency are also to be investigated. Generating capacity and the number of employees are used for input data, and revenue, net profit and electricity sales are used for output data. We find that the companies with 100% relative efficiency are only 9 among 51 electricity companies. And the technical and scale efficiency of KEPCO is 98.7% and 78.89%, respectively. This means that the inefficiency of KEPCO is caused by the scale inefficiency. The analysis shows that the employees should be decreased by 15% at minimum to get the 100% efficiency. The result suggests that KEPCO needs the structural reform to improve the efficiency.

• Journal of Korean Society on Water Environment
• /
• v.35 no.4
• /
• pp.332-339
• /
• 2019

A comparative study on the anaerobic digestion efficiency according to the temperature change was conducted considering the characteristics of domestic food wastes with high water content of about 80 % or more. The substrate was tested for anaerobic digestion efficiency in two substrates, a liquid component separated naturally from food waste and food waste itself. In the anaerobic digestion experiments, the digestion efficiency was the highest at $55^{\circ}C$ (thermophilic temperature). However, the digestion efficiency at $45^{\circ}C$(middle high temperature) was lower than that at $35^{\circ}C$(mesophilic temperature). The comparison of general food wastes anaerobic digestion requiring 30 days of hydraulic retention time to the liquid component indicated a stable digestion efficiency even after 15 days of hydraulic retention time.In the experiments conducted on food waste, the digestion efficiency at $55^{\circ}C$ was higher than that at $35^{\circ}C$. When the food waste, especially the liquid component originating from food waste, is treated by anaerobic digestion method, the mesophilic temperature and thermophilic temperature conditions are more favorable in the digestion efficiency than the middle high temperature ($45^{\circ}C$). However, when applying thermophilic or mesophilic temperature anaerobic digestion process operation in the field, the amount of energy input should be considered.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.606-611
• /
• 2011

Power electronics is a key technology for electric, hybrid, plug-in hybrid, and fuel cell vehicles. Typical power electronics converters used in electric drive vehicles include dc/dc converters, inverters, and battery chargers. New semiconductor materials such as silicon carbide (SiC) and novel topologies such as the Z-source inverter (ZSI) have a great deal of potential to improve the overall performance of these vehicles. In this paper, a Z-source inverter for fuel cell vehicle application is examined under three different scenarios. 1. a ZSI with Si IGBT modules, 2. a ZSI with hybrid modules, Si IGBTs/SiC Schottky diodes, and 3. a ZSI with SiC MOSFETs/SiC Schottky diodes. Then, a comparison of the three scenarios is conducted. Conduction loss, switching loss, reverse recovery loss, and efficiency are considered for comparison. A conclusion is drawn that the SiC devices can improve the inverter and inverter-motor efficiency, and reduce the system size and cost due to the low loss properties of SiC devices. A comparison between a ZSI and traditional PWM inverters with SiC devices is also presented in this paper. Based on this comparison, the Z-source inverter produces the highest efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.511-514
• /
• 1999

Data pertaining to 1111 first lactation performance record of Karan Fries (Holstein-Friesian $\times$ Zebu) cows spread over a period of 21 years and sired by 72 bulls were used to examine the efficiency of sire indices for lactation milk production using auxiliary traits. First lactation length, first service period, first calving interval, first dry period and age at first calving were considered as auxiliary traits. The efficiency of this method was compared with simple daughter average index (D), contemporary comparison method (CC), least-square method (LSQ), simplified regressed least-squares method (SRLS) and best linear unbiased prediction (BLUP) for lactation milk production. The relative efficiency of sire evaluation methods using one auxiliary trait was lower (24.2-32.8%) in comparison to CC method, the most efficient method observed in this study. Use of two auxiliary traits at a time did not further improve the efficiency. The auxiliary sire indices discriminate better among bulls as the range of breeding values were higher in these methods in comparison to conventional sire evaluation methods. The rank correlation between breeding values estimated using auxiliary traits were high (0.77-0.78) with CC method. The rank correlation among auxiliary sire indices ranged from 0.98 to 0.99, indicating similar ranking of sire for breeding values of milk production in all the auxiliary sire indices.

• Asia pacific journal of information systems
• /
• v.12 no.3
• /
• pp.1-20
• /
• 2002

For the last decade, some leading groups of corporations in Korea have integrated and managed their Information Systems(IS) functions. Each group established a separate System Management(SM) company to manage the IS and tried to get a synergy effect from the integration. These attempts, however, were not initiated by any one company. Rather they were group efforts. Moreover, the previous measuring tools evaluated IS with the scope of technical performance or quantitative user satisfaction using an absolute scale. Obscure criteria were used in an attempt to present improvements in IS function which were qualitatively weak. This study evaluates whether integration has been efficient and successful. For this purpose, we evaluate the performance efficiency of IS functions with Data Envelopment Analysis(DEA) methodology. In comparison with prior methods, DEA presents the rate of relative efficiency, the efficiency frontier for improving inefficiency, the degree of improvement(slack), and the guideline to construct any benchmark(reference set). For our DEA evaluation, this study selected a leading group of 23 companies in Korea. Our experimental results are as follows. First, efficiency was rated low on average. It also demonstrates that the motivation of performance efficiency of IS functions is deficient. Second, the result of the test to find the existence of economy of scale and scope shows that the growth of an organization and industrial characteristics do not affect IS performance efficiency from the perspective of user satisfaction. Finally, the comparison with other evaluation approaches informs us that DEA can be a complementary evaluation method which supports other measuring tools.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.595-606
• /
• 2000

In order to compare analytical conditions for measuring PAHs(polycyclic aromatic hydrocarbons) in ambient air, a series of experiment were conducted using three different types of extraction methods that include:(1) accelerated solvent extraction (ASE), (2) soxhlet, and (3) sonification methods. Efficiency and relevant analytixal parameters for each of these methods were examined on five different types of solvents that include:(1) 10% diethyl ether in n-hexane(v/v), (2) dichloromethane, (3)cyclohexane.(4) toluene, and (5) Benzene: ethanol (4:1). Comparison of extraction efficiency for various combinations between methods and solvents was made through an application of both internal and external standard calibration techniques. The extraction efficiency tests, when checked using both internal and external standards, allowed us to derive meaningful comparison among different techniques and among solvents.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2601-2606
• /
• 2020

In this study, we expanded the performance of the existing EXVol code and performed empirical experiments and calculations. A high-resolution gamma spectroscopy system was constructed, and a standard point source and a standard volume source were measured with an HPGe detector with 43.1% relative efficiency. EXVol was verified by quantitative comparison of the detection efficiencies determined by measurements and calculations. To introduce the concept of the detector scanning that occurs in the actual measurement into the EXVol code, a collimator was placed between the source and detector. The detection efficiency was determined in the asymmetric arrangement of the source and detector with a collimator. A collimator made of lead with a diameter of 15 mm and a thickness of 50 mm was installed between the source and the detector to determine the detection efficiency at a specific location. The calculation result was contour plotted so that the distribution of detection efficiency could be visually confirmed. The relative deviation between the measurements and calculations for the coaxial and asymmetric structures was 10%, and that for the collimation structure was 20%. The results of this study can be applied to research using γ-ray measurements.