• 미생물학회지
• /
• 제54권2호
• /
• pp.105-112
• /
• 2018

본 연구에서 탈질 효율 비교를 위해 당밀과 메탄올을 외부 탄소원으로 사용하였다. 세부 실험조건은 C/N ratio 조건에 따라 구분하였다. 회분식 실험 결과, 당밀과 메탄올 모두 C/N ratio가 증가할수록 탈질 효율은 증가하였다. 당밀의 최적 C/N ratio는 잔류 COD 농도와 탈질 효율을 고려할 때 4:1로 나타났으며, 이때 탈질 효율은 91.4%이다. 동역학적 인자로 SDNR을 도출한 결과, C/N ratio가 증가할수록 당밀과 메탄올은 유사한 SDNR 값을 보였으며, C/N ratio 4:1 조건에서 0.0292 g $NO_3{^-}-N$ removal/g MLVSS/day (molasse), 0.0299 g $NO_3{^-}-N$ removal/g MLVSS/day (mehtanol)로 나타났다. 미생물 군집 분석을 통해 당밀에 적응된 슬러지에는 Pseudomonas sp.와 Bergeylla sp. 박테리아가 우점화 된 것을 확인할 수 있었다. 또한 미생물 군집의 다양성보다는 일부 박테리아에 대한 집중성이 더 높게 나타났다. 이에 따라 당밀은 탈질에 특화된 미생물을 집중적으로 성장시키며, 탈질 성능을 높일 수 있는 대체 외부탄소원으로 적용이 가능할 것으로 판단된다.

• 생물환경조절학회지
• /
• 제18권4호
• /
• pp.354-362
• /
• 2009

본 연구는 장미 순환식 수경재배 시 재배시기별로 적합한 배양액을 개발하고자 일본야채다업시험장 표준액을 1/4S, 1/2S, 2/3S, 1S로 하여 펄라이트와 입상 암면을 4:6 부피비로 섞은 고형배지를 이용하여 실험을 실시하였다. 고온기재배의 경우 1/2S 처리구에서, 저온기의 경우 2/3S 처리구에서 광합성 속도, 절화 품질 및 생육이 우수하였다. 이를 토대로 1/2S(고온기), 2/3S(저온기) 처리구의 양수분 흡수율을 기준으로 새로운 배양액을 조성하였다. 이온의 조성은 고온기의 경우 $NO_{3^-}N$ 6.8, $NH_{4^-}N$ 0.7, $PO_{4^-}P$ 2.0, K 3.8, Ca 3.0, Mg 1.2, $SO_{4^-}S$ $1.2me{\cdot}L^{-1}$, 저온기의 경우 $NO_{3^-}N$ 6.8, $NH_{4^-}N$ 0.7, $PO_{4^-}P$ 2.0, K 3.8, Ca 3.0, Mg 1.2, $SO_{4^-}S$ $1.2me{\cdot}L^{-1}$ 이었다. 개발한 배양액의 적합성 평가실험 결과 UOS 배양액은 Ca, P 등의 이온이 장미의 양분흡수율보다 많이 함유된 기존의 배양액과 비교하여 근권 내 EC 변화가 안정적이었다. 또한 절화수량이 재배기간에 관계없이 기존 배양액보다 높은 결과를 나타내었고 특히 저온기 재배시 아이찌현 배양액 처리구에 비하여 수확량이 140% 증가하였다. 따라서 고형배지를 이용한 장미 순환식 수경재배시 새로 개발된 배양액을 사용할 경우 기존 배양액에 비해 비료절감의 효과와 함께 안정적인 생육 및 수량증대를 기대할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권11호
• /
• pp.1529-1534
• /
• 2005

Individual-breed assignments were implemented in six swine populations using twenty six microsatellites recommended by the Food and Agriculture Organization and the International Society for Animal Genetics (FAO-ISAG). Most microsatellites exhibited high polymorphisms as shown by the number of alleles and the polymorphism information content. The assignment accuracy per locus obtained by using the Bayesian method ranged from 33.33% (CGA) to 68.47% (S0068), and the accumulated assignment accuracy of the top ten loci combination added up to 96.40%. The assignment power of microsatellites based on the Bayesian method had positive correlations with the number of alleles and the gene differential coefficient ($G_{st}$) per locus, while it has no relationship to genetic heterozygosity, polymorphism information content per locus and the exclusion probabilities under case II and case III. The percentage of corrected assignment was highest for the Bayesian method, followed by the gene frequency and distancebased methods. The assignment efficiency of microsatellites rose with increase in the number of loci used, and it can reach 98% when using a ten-locus combination. This indicated that such a set of ten microsatellites is sufficient for breed verification purposes.

• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2006

The steel foundries with electric arc furnaces handling metal scraps have recently gained an attention as a potential source of dusts. The present study focuses on the analysis of dust emissions and removals during furnace charging and melting processes by commercial CFD software named FLUENT. A body fitted grid system consisting of 880,000 meshes was first generated by Gambit for the electric arc furnace with the capacity of 60 ton/cycle and then FLUENT was invoked to solve the corresponding NavierStokers equation for the momentum, temperature and dust concentration. The entire processes from metal charging to metal melting were simulated to investigate the unsteady behaviors of fluid flows and dust concentrations. The model simulation results showed that as the top of the electric arc furnace opened for metal charging, hot plumes bursted out from the furnace rose strongly by buoyance and escaped mostly through the main hood. Therefore, the capacity of main hoods determined the vent efficiency in the metal charging process. As the furnace was closed after the metal charging and the metal melting processes was followed, the hot flow stream stretching from the furnace to the main hood was dissipated fast and the flow from the inlet of the bottom of the left hand side to the main and monitoring hoods constituted the main stream. And there was only a slow flow in the right hand side of the furnace. Therefore, the dust concentrations were calculated higher in the left hand side of the furnace, which was consistent with observations.

• 에너지공학
• /
• 제21권4호
• /
• pp.356-361
• /
• 2012

지열, 풍력, 태양열에너지 등과 같은 신재생에너지 분야에 관한 연구가 활발히 이루어지고 있으나 전체 에너지 중에서 차지하는 비율은 아직 미미하다. 본 논문은 주열원인 열사이폰관형 태양열집열기와 보조열원인 X-L 파이프 보일러장치를 서로 결합한 하이브리드 난방시스템에 관한 연구이다. 특히 새로운 형태의 열사이폰관형 태양열집열기에 관한 성능 평가와 함께 보조열원장치의 성능 및 안전성에 대해 조사하였다. 그 결과, 열사이폰관형 태양열집열기는 이중관형 태양열집열기보다 집열효율이 그 구조적 특성 때문에 최대 20.7% 더 증가하였다. 또한 보조열원장치의 X-L 파이프 내 특수열매체는 순수 물보다 약 20% 더 빠르게 온도가 상승하였으며, X-L 파이프 보일러는 안정성 때문에 팽창압력 해소장치가 필요함을 확인하였다.

• 자원리싸이클링
• /
• 제23권2호
• /
• pp.46-52
• /
• 2014

본 논문은 마이크로파와 고온발열체에 의한 유류오염토양의 정화효율에 관한 연구를 정리한 것이다. 수분의 함량은 처리량에 따라 측정이 되었는데 상대적으로 짧은 시간에 300 g에 도달했다. TPH(Total Petroleum Hydrocarbons)처리 속도는 SiC 발열체를 단독으로 사용했을 때와 비교하였을 때, SiC와 활성탄을 4 kW/kg에서 동시에 사용했을 때 70.1%의 제거율로 가장 높은 값을 보여주었다. 특히, 3 kW/kg때를 제외하고는 전력이 증가할수록 처리속도도 증가하였다. SiC와 활성탄으로 제작된 발열체를 사용할 경우, 내부 온도가 $300^{\circ}C$를 초과하였으며, 4 kW로 2분동안 유지되었을 때 온도가 다시 하락하였으나, 8분이후에는 다시 온도가 상승하였다. 이러한 결과를 기초로 하여, 샘플을 처리하기 위한 에너지량은 마이크로파의 전력에 따라 계산이 되었으며, TPH처리 상수는 유류오염토양의 처리 특성에 관한 다양한 실험에 의해 측정이 되었다.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.273-279
• /
• 2008

Space separation method that use independent reactor for nitrification and other reactor for denitrification has been commonly used for biological nitrogen removal process like $A^2O$ process. However, this method needs large space and complicate pipelines and time separation method such as SBR process have a difficulty in continuous treatment. Thus biological nitrogen removal process which is capable of continuous treatment, easy opeation and space saving is urgently required. In this research, submerged moving media was used for a biofilm process and suspended sludge was used for biological nitrogen removal at the same time. In particular DO environment by controlling air flow rate was investigated for simultaneous nitrification/denitrification. Total nitrogen removal in aeration rate more than $67L/min{\cdot}m^3$ showed 51~53% and rose to 65%, 70% and 78% in $50L/min{\cdot}m^3$, $58L/min{\cdot}m^3$ and $25L/min{\cdot}m^3$ respectively. Total phosphorus removal was very low about 10~20% more than $67L/min{\cdot}m^3$ aeration rates. But total phosphorus removal roses when reduces aeration rate by $58L/min{\cdot}m^3$ low and it showed total phosphorus removal of 72% in aeration rate $25L/min{\cdot}m^3$.

• 대한수의학회지
• /
• 제51권1호
• /
• pp.15-20
• /
• 2011

In this study, we isolated 12 of Brucella (B.) spp. from cattle, which have been positive in Rose Bangal test and tube agglutination test in Gyeongbuk province in 2009. According to AMOS PCR analysis, isolated 12 strains were identified as B. abortus. Murine derived macrophage, RAW 264.7 cells, were infected with isolated 12 strains or reference strain (B. abortus 544), and bacterial internalization were characterized. According to these results, we divided the isolated strains into the following three groups: class I, lower internalization than that of B. abortus 544; class II, similar internalization to that of that of B. abortus 544; class III, higher internalization than that of B. abortus 544 within RAW 264.7 cells. Furthermore, intracellular growth, bacterial adherent assay, LAMP-1 colocalization, virulence in mice and surface protein pattern were characterized. From these results, representative strains of class III showed lower LAMP-1 colocalization, higher adherent efficiency, higher virulence in mice than those of B. abortus 544, and showed different pattern of surface proteins. These results suggest that B. abortus field strains, isolated from cattle in Korea, possess various virulence properties and higher internalization ability of field strain may have an important role for its virulence expression.

• 한국보건간호학회지
• /
• 제18권2호
• /
• pp.205-217
• /
• 2004

This study conducted a survey with the 67 students who are in their 2nd year at 3 vocational high schools. The researcher of this study developed and operated the smoking cessation program based on the Transtheoretical model. To evaluate the effects, experiments were repeatedly done. The data were collected from June 21, 2004 till July 9, 2004. The survey was done based on the questionnaire-interview before and after education. The collected date was computerized by using SPSS-WIN 10.0 program. The results are as follows: Firstly. before education, the smoking cessation stage of change shows precontemplation stage $37.3\%$, preparation stage $37.3\%$, and contemplation stage $25.4\%$ respectively. However, after education it shows preparation stage $44.8\%$, action stage $25.4\%$, contemplation stage $19.4\%$, precontemplation stage $10.4\%$. The positive result was $62.7\%$ and smoking cessation stage of change made a 0.9 step increase. Secondly, process of change rose in all the areas except helping relationship. It also shows statistical improvement in all the fields except the dramatic relief of the experiential process, the helping relationship of behavioral process and stimulus control Thirdly, negative affective situation temptation, positive social situation temptation, and habitual strength temptation's average points decreased but showed statistical differences. Weight control temptation's average points decreased after education but didn't show statistical differences. Self efficiency increased measurably after education. Fourthly, concerning the social pros and coping pros caused by smoking, the average points were low after education and showed statistic decrease. As for the cons due to smoking, the average points increased but didn't show any statistical differences. In conclusion, thanks to the smoking cessation program applied by the Transtheoretical model, the smoking rate of vocational high school students became low and their smoking temptation also dropped considerably. In conclusion, while the pros for smoking were lessened, its corns were heightened through the educational awareness offered by this program.

• 한국환경보건학회지
• /
• 제36권4호
• /
• pp.323-336
• /
• 2010

We evaluated the properties of a fixed-bed column reactor for high-concentration tetrachloroethylene (PCE) removal. The anaerobic bacterium Clostridium bifermentans DPH-1 was able to dechlorinate PCE to cis-1,2-dichloroethylene (cDCE) via trichloroethylene (TCE) at high rates in the monoculture biofilm of an upflow fixed-bed column reactor. The first-order reaction rate of C. bifermentans DPH-1 was relatively high at $0.006\;mg\;protein^{-1}{\cdot}l{\cdot}h^{-1}$, and comparable to rates obtained by others. When we gradually raised the influent PCE concentration from $30\;{\mu}M$ to $905\;{\mu}M$, the degree of PCE dechlorination rose to over 99% during the operation period of 2,000 h. In order to maintain efficiency of transformation of PCE in this reactor system, more than 6 h hydraulic retention time (HRT) is required. The maximum volumetric dechlorination rate of PCE was determined to be $1,100\;{\mu}mol{\cdot}d^{-1}l$ of reactor $volume^{-1}$, which is relatively high compared to rates reported previously. The results of this study indicate that the PCE removal performance of this fixed-bed reactor immobilized mono-culture is comparable to that of a fixed-bed reactor mixture culture system. Furthermore, our system has the major advantage of a rapid (5 days) start-up time for the reactor. The flow characteristics of this reactor are intermediate between those of the plug-flow and complete-mix systems. Biotransformation of PCE into innocuous compounds is desirable; however, unfortunately cDCE, which is itself toxic, was the main product of PCE dechlorination in this reactor system. In order to establish a system for complete detoxification of PCE, co-immobilization of C. bifermentans DPH-1 with other bacteria that degrade cDCE aerobically or anaerobically to ethene or ethane may be effective.